new colors and appearance changes

10 files changed, 1533 insertions, 117 deletions

diff --git a/dotfiles/.config/kitty/kitty.conf b/dotfiles/.config/kitty/kitty.conf
new file mode 100644
index 0000000..09d1fc4
--- /dev/null
+++ b/dotfiles/.config/kitty/kitty.conf
@@ -0,0 +1,1058 @@
+# vim:fileencoding=utf-8:ft=conf:foldmethod=marker
+
+#: Fonts {{{
+
+#: kitty has very powerful font management. You can configure
+#: individual font faces and even specify special fonts for particular
+#: characters.
+
+font_family      BlexMono Nerd Font Mono
+# bold_font        auto
+# italic_font      auto
+# bold_italic_font auto
+
+#: You can specify different fonts for the bold/italic/bold-italic
+#: variants. To get a full list of supported fonts use the `kitty
+#: list-fonts` command. By default they are derived automatically, by
+#: the OSes font system. Setting them manually is useful for font
+#: families that have many weight variants like Book, Medium, Thick,
+#: etc. For example::
+
+#:     font_family      Operator Mono Book
+#:     bold_font        Operator Mono Medium
+#:     italic_font      Operator Mono Book Italic
+#:     bold_italic_font Operator Mono Medium Italic
+
+font_size 10
+
+#: Font size (in pts)
+
+# adjust_line_height  0
+# adjust_column_width 0
+
+#: Change the size of each character cell kitty renders. You can use
+#: either numbers, which are interpreted as pixels or percentages
+#: (number followed by %), which are interpreted as percentages of the
+#: unmodified values. You can use negative pixels or percentages less
+#: than 100% to reduce sizes (but this might cause rendering
+#: artifacts).
+
+# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols
+
+#: Map the specified unicode codepoints to a particular font. Useful
+#: if you need special rendering for some symbols, such as for
+#: Powerline. Avoids the need for patched fonts. Each unicode code
+#: point is specified in the form U+<code point in hexadecimal>. You
+#: can specify multiple code points, separated by commas and ranges
+#: separated by hyphens. symbol_map itself can be specified multiple
+#: times. Syntax is::
+
+#:     symbol_map codepoints Font Family Name
+
+# disable_ligatures never
+
+#: Choose how you want to handle multi-character ligatures. The
+#: default is to always render them.  You can tell kitty to not render
+#: them when the cursor is over them by using cursor to make editing
+#: easier, or have kitty never render them at all by using always, if
+#: you don't like them. The ligature strategy can be set per-window
+#: either using the kitty remote control facility or by defining
+#: shortcuts for it in kitty.conf, for example::
+
+#:     map alt+1 disable_ligatures_in active always
+#:     map alt+2 disable_ligatures_in all never
+#:     map alt+3 disable_ligatures_in tab cursor
+
+# box_drawing_scale 0.001, 1, 1.5, 2
+
+#: Change the sizes of the lines used for the box drawing unicode
+#: characters These values are in pts. They will be scaled by the
+#: monitor DPI to arrive at a pixel value. There must be four values
+#: corresponding to thin, normal, thick, and very thick lines.
+
+#: }}}
+
+#: Cursor customization {{{
+
+# cursor #cccccc
+
+#: Default cursor color
+
+# cursor_text_color #111111
+
+#: Choose the color of text under the cursor. If you want it rendered
+#: with the background color of the cell underneath instead, use the
+#: special keyword: background
+
+cursor_shape underline
+
+#: The cursor shape can be one of (block, beam, underline)
+
+# cursor_blink_interval -1
+
+#: The interval (in seconds) at which to blink the cursor. Set to zero
+#: to disable blinking. Negative values mean use system default. Note
+#: that numbers smaller than repaint_delay will be limited to
+#: repaint_delay.
+
+cursor_stop_blinking_after 0.0
+
+#: Stop blinking cursor after the specified number of seconds of
+#: keyboard inactivity.  Set to zero to never stop blinking.
+
+#: }}}
+
+#: Scrollback {{{
+
+scrollback_lines 10000
+
+#: Number of lines of history to keep in memory for scrolling back.
+#: Memory is allocated on demand. Negative numbers are (effectively)
+#: infinite scrollback. Note that using very large scrollback is not
+#: recommended as it can slow down resizing of the terminal and also
+#: use large amounts of RAM.
+
+# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
+
+#: Program with which to view scrollback in a new window. The
+#: scrollback buffer is passed as STDIN to this program. If you change
+#: it, make sure the program you use can handle ANSI escape sequences
+#: for colors and text formatting. INPUT_LINE_NUMBER in the command
+#: line above will be replaced by an integer representing which line
+#: should be at the top of the screen.
+
+# scrollback_pager_history_size 0
+
+#: Separate scrollback history size, used only for browsing the
+#: scrollback buffer (in MB). This separate buffer is not available
+#: for interactive scrolling but will be piped to the pager program
+#: when viewing scrollback buffer in a separate window. The current
+#: implementation stores one character in 4 bytes, so approximatively
+#: 2500 lines per megabyte at 100 chars per line. A value of zero or
+#: less disables this feature. The maximum allowed size is 4GB.
+
+# wheel_scroll_multiplier 5.0
+
+#: Modify the amount scrolled by the mouse wheel. Note this is only
+#: used for low precision scrolling devices, not for high precision
+#: scrolling on platforms such as macOS and Wayland. Use negative
+#: numbers to change scroll direction.
+
+# touch_scroll_multiplier 1.0
+
+#: Modify the amount scrolled by a touchpad. Note this is only used
+#: for high precision scrolling devices on platforms such as macOS and
+#: Wayland. Use negative numbers to change scroll direction.
+
+#: }}}
+
+#: Mouse {{{
+
+mouse_hide_wait 1.0
+
+#: Hide mouse cursor after the specified number of seconds of the
+#: mouse not being used. Set to zero to disable mouse cursor hiding.
+#: Set to a negative value to hide the mouse cursor immediately when
+#: typing text.
+
+# url_color #0087bd
+url_style single
+
+#: The color and style for highlighting URLs on mouse-over. url_style
+#: can be one of: none, single, double, curly
+
+# open_url_modifiers kitty_mod
+
+#: The modifier keys to press when clicking with the mouse on URLs to
+#: open the URL
+
+# open_url_with default
+
+#: The program with which to open URLs that are clicked on. The
+#: special value default means to use the operating system's default
+#: URL handler.
+
+# copy_on_select no
+
+#: Copy to clipboard or a private buffer on select. With this set to
+#: clipboard, simply selecting text with the mouse will cause the text
+#: to be copied to clipboard. Useful on platforms such as macOS that
+#: do not have the concept of primary selections. You can instead
+#: specify a name such as a1 to copy to a private kitty buffer
+#: instead. Map a shortcut with the paste_from_buffer action to paste
+#: from this private buffer. For example::
+
+#:     map cmd+shift+v paste_from_buffer a1
+
+#: Note that copying to the clipboard is a security risk, as all
+#: programs, including websites open in your browser can read the
+#: contents of the system clipboard.
+
+# strip_trailing_spaces never
+
+#: Remove spaces at the end of lines when copying to clipboard. A
+#: value of smart will do it when using normal selections, but not
+#: rectangle selections. always will always do it.
+
+# rectangle_select_modifiers ctrl+alt
+
+#: The modifiers to use rectangular selection (i.e. to select text in
+#: a rectangular block with the mouse)
+
+# terminal_select_modifiers shift
+
+#: The modifiers to override mouse selection even when a terminal
+#: application has grabbed the mouse
+
+# select_by_word_characters :@-./_~?&=%+#
+
+#: Characters considered part of a word when double clicking. In
+#: addition to these characters any character that is marked as an
+#: alphanumeric character in the unicode database will be matched.
+
+# click_interval -1.0
+
+#: The interval between successive clicks to detect double/triple
+#: clicks (in seconds). Negative numbers will use the system default
+#: instead, if available, or fallback to 0.5.
+
+# focus_follows_mouse no
+
+#: Set the active window to the window under the mouse when moving the
+#: mouse around
+
+# pointer_shape_when_grabbed arrow
+
+#: The shape of the mouse pointer when the program running in the
+#: terminal grabs the mouse.
+
+#: }}}
+
+#: Performance tuning {{{
+
+# repaint_delay 10
+
+#: Delay (in milliseconds) between screen updates. Decreasing it,
+#: increases frames-per-second (FPS) at the cost of more CPU usage.
+#: The default value yields ~100 FPS which is more than sufficient for
+#: most uses. Note that to actually achieve 100 FPS you have to either
+#: set sync_to_monitor to no or use a monitor with a high refresh
+#: rate. Also, to minimize latency when there is pending input to be
+#: processed, repaint_delay is ignored.
+
+# input_delay 3
+
+#: Delay (in milliseconds) before input from the program running in
+#: the terminal is processed. Note that decreasing it will increase
+#: responsiveness, but also increase CPU usage and might cause flicker
+#: in full screen programs that redraw the entire screen on each loop,
+#: because kitty is so fast that partial screen updates will be drawn.
+
+# sync_to_monitor yes
+
+#: Sync screen updates to the refresh rate of the monitor. This
+#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
+#: when scrolling. However, it limits the rendering speed to the
+#: refresh rate of your monitor. With a very high speed mouse/high
+#: keyboard repeat rate, you may notice some slight input latency. If
+#: so, set this to no.
+
+#: }}}
+
+#: Terminal bell {{{
+
+# enable_audio_bell yes
+
+#: Enable/disable the audio bell. Useful in environments that require
+#: silence.
+
+# visual_bell_duration 0.0
+
+#: Visual bell duration. Flash the screen when a bell occurs for the
+#: specified number of seconds. Set to zero to disable.
+
+# window_alert_on_bell yes
+
+#: Request window attention on bell. Makes the dock icon bounce on
+#: macOS or the taskbar flash on linux.
+
+# bell_on_tab yes
+
+#: Show a bell symbol on the tab if a bell occurs in one of the
+#: windows in the tab and the window is not the currently focused
+#: window
+
+# command_on_bell none
+
+#: Program to run when a bell occurs.
+
+#: }}}
+
+#: Window layout {{{
+
+remember_window_size  no
+# initial_window_width  640
+# initial_window_height 400
+
+#: If enabled, the window size will be remembered so that new
+#: instances of kitty will have the same size as the previous
+#: instance. If disabled, the window will initially have size
+#: configured by initial_window_width/height, in pixels. You can use a
+#: suffix of "c" on the width/height values to have them interpreted
+#: as number of cells instead of pixels.
+
+# enabled_layouts *
+
+#: The enabled window layouts. A comma separated list of layout names.
+#: The special value all means all layouts. The first listed layout
+#: will be used as the startup layout. For a list of available
+#: layouts, see the
+#: https://sw.kovidgoyal.net/kitty/index.html#layouts.
+
+# window_resize_step_cells 2
+# window_resize_step_lines 2
+
+#: The step size (in units of cell width/cell height) to use when
+#: resizing windows. The cells value is used for horizontal resizing
+#: and the lines value for vertical resizing.
+
+# window_border_width 1.0
+
+#: The width (in pts) of window borders. Will be rounded to the
+#: nearest number of pixels based on screen resolution. Note that
+#: borders are displayed only when more than one window is visible.
+#: They are meant to separate multiple windows.
+
+# draw_minimal_borders yes
+
+#: Draw only the minimum borders needed. This means that only the
+#: minimum needed borders for inactive windows are drawn. That is only
+#: the borders that separate the inactive window from a neighbor. Note
+#: that setting a non-zero window margin overrides this and causes all
+#: borders to be drawn.
+
+# window_margin_width 0.0
+
+#: The window margin (in pts) (blank area outside the border)
+
+# single_window_margin_width -1000.0
+
+#: The window margin (in pts) to use when only a single window is
+#: visible. Negative values will cause the value of
+#: window_margin_width to be used instead.
+
+# window_padding_width 0.0
+
+#: The window padding (in pts) (blank area between the text and the
+#: window border)
+
+# placement_strategy center
+
+#: When the window size is not an exact multiple of the cell size, the
+#: cell area of the terminal window will have some extra padding on
+#: the sides. You can control how that padding is distributed with
+#: this option. Using a value of center means the cell area will be
+#: placed centrally. A value of top-left means the padding will be on
+#: only the bottom and right edges.
+
+# active_border_color #00ff00
+
+#: The color for the border of the active window. Set this to none to
+#: not draw borders around the active window.
+
+# inactive_border_color #cccccc
+
+#: The color for the border of inactive windows
+
+# bell_border_color #ff5a00
+
+#: The color for the border of inactive windows in which a bell has
+#: occurred
+
+# inactive_text_alpha 1.0
+
+#: Fade the text in inactive windows by the specified amount (a number
+#: between zero and one, with zero being fully faded).
+
+# hide_window_decorations no
+
+#: Hide the window decorations (title-bar and window borders). Whether
+#: this works and exactly what effect it has depends on the window
+#: manager/operating system.
+
+# resize_debounce_time 0.1
+
+#: The time (in seconds) to wait before redrawing the screen when a
+#: resize event is received. On platforms such as macOS, where the
+#: operating system sends events corresponding to the start and end of
+#: a resize, this number is ignored.
+
+# resize_draw_strategy static
+
+#: Choose how kitty draws a window while a resize is in progress. A
+#: value of static means draw the current window contents, mostly
+#: unchanged. A value of scale means draw the current window contents
+#: scaled. A value of blank means draw a blank window. A value of size
+#: means show the window size in cells.
+
+#: }}}
+
+#: Tab bar {{{
+
+# tab_bar_edge bottom
+
+#: Which edge to show the tab bar on, top or bottom
+
+# tab_bar_margin_width 0.0
+
+#: The margin to the left and right of the tab bar (in pts)
+
+tab_bar_style separator
+
+#: The tab bar style, can be one of: fade, separator or hidden. In the
+#: fade style, each tab's edges fade into the background color, in the
+#: separator style, tabs are separated by a configurable separator.
+
+# tab_bar_min_tabs 2
+
+#: The minimum number of tabs that must exist before the tab bar is
+#: shown
+
+# tab_switch_strategy previous
+
+#: The algorithm to use when switching to a tab when the current tab
+#: is closed. The default of previous will switch to the last used
+#: tab. A value of left will switch to the tab to the left of the
+#: closed tab. A value of last will switch to the right-most tab.
+
+# tab_fade 0.25 0.5 0.75 1
+
+#: Control how each tab fades into the background when using fade for
+#: the tab_bar_style. Each number is an alpha (between zero and one)
+#: that controls how much the corresponding cell fades into the
+#: background, with zero being no fade and one being full fade. You
+#: can change the number of cells used by adding/removing entries to
+#: this list.
+
+# tab_separator " ┇"
+
+#: The separator between tabs in the tab bar when using separator as
+#: the tab_bar_style.
+
+# tab_title_template {title}
+
+#: A template to render the tab title. The default just renders the
+#: title. If you wish to include the tab-index as well, use something
+#: like: {index}: {title}. Useful if you have shortcuts mapped for
+#: goto_tab N.
+
+# active_tab_foreground   #000
+# active_tab_background   #eee
+# active_tab_font_style   bold-italic
+# inactive_tab_foreground #444
+# inactive_tab_background #999
+# inactive_tab_font_style normal
+
+#: Tab bar colors and styles
+
+#: }}}
+
+#: Color scheme {{{
+
+foreground #e5e9f0
+background #1b1e25
+
+#: The foreground and background colors
+
+background_opacity 0.95
+
+#: The opacity of the background. A number between 0 and 1, where 1 is
+#: opaque and 0 is fully transparent.  This will only work if
+#: supported by the OS (for instance, when using a compositor under
+#: X11). Note that it only sets the default background color's
+#: opacity. This is so that things like the status bar in vim,
+#: powerline prompts, etc. still look good.  But it means that if you
+#: use a color theme with a background color in your editor, it will
+#: not be rendered as transparent.  Instead you should change the
+#: default background color in your kitty config and not use a
+#: background color in the editor color scheme. Or use the escape
+#: codes to set the terminals default colors in a shell script to
+#: launch your editor.  Be aware that using a value less than 1.0 is a
+#: (possibly significant) performance hit.  If you want to dynamically
+#: change transparency of windows set dynamic_background_opacity to
+#: yes (this is off by default as it has a performance cost)
+
+# dynamic_background_opacity no
+
+#: Allow changing of the background_opacity dynamically, using either
+#: keyboard shortcuts (increase_background_opacity and
+#: decrease_background_opacity) or the remote control facility.
+
+# dim_opacity 0.75
+
+#: How much to dim text that has the DIM/FAINT attribute set. One
+#: means no dimming and zero means fully dimmed (i.e. invisible).
+
+# selection_foreground #000000
+
+#: The foreground for text selected with the mouse. A value of none
+#: means to leave the color unchanged.
+
+# selection_background #fffacd
+
+#: The background for text selected with the mouse.
+
+
+#: The 16 terminal colors. There are 8 basic colors, each color has a
+#: dull and bright version. You can also set the remaining colors from
+#: the 256 color table as color16 to color255.
+
+color0 #1d2021
+color8 #665c54
+
+#: black
+
+color1 #b73030
+color9 #c45c5c
+
+#: red
+
+color2  #7ea95a
+color10 #9eba86
+
+#: green
+
+color3  #d99e26
+color11 #e2b55a
+
+#: yellow
+
+color4  #3f6e90
+color12 #81acc1
+
+#: blue
+
+color5  #9c6992
+color13 #b48ead
+
+#: magenta
+
+color6  #5b8277
+color14 #89b6a0
+
+#: cyan
+
+color7  #d8dee9
+color15 #fbf1c7
+
+#: white
+
+#: }}}
+
+#: Advanced {{{
+
+# shell .
+
+#: The shell program to execute. The default value of . means to use
+#: whatever shell is set as the default shell for the current user.
+#: Note that on macOS if you change this, you might need to add
+#: --login to ensure that the shell starts in interactive mode and
+#: reads its startup rc files.
+
+# editor .
+
+#: The console editor to use when editing the kitty config file or
+#: similar tasks. A value of . means to use the environment variable
+#: EDITOR. Note that this environment variable has to be set not just
+#: in your shell startup scripts but system-wide, otherwise kitty will
+#: not see it.
+
+# close_on_child_death no
+
+#: Close the window when the child process (shell) exits. If no (the
+#: default), the terminal will remain open when the child exits as
+#: long as there are still processes outputting to the terminal (for
+#: example disowned or backgrounded processes). If yes, the window
+#: will close as soon as the child process exits. Note that setting it
+#: to yes means that any background processes still using the terminal
+#: can fail silently because their stdout/stderr/stdin no longer work.
+
+# allow_remote_control no
+
+#: Allow other programs to control kitty. If you turn this on other
+#: programs can control all aspects of kitty, including sending text
+#: to kitty windows, opening new windows, closing windows, reading the
+#: content of windows, etc. Note that this even works over ssh
+#: connections.
+
+# env
+
+#: Specify environment variables to set in all child processes. Note
+#: that environment variables are expanded recursively, so if you
+#: use::
+
+#:     env MYVAR1=a
+#:     env MYVAR2=${MYVAR1}/${HOME}/b
+
+#: The value of MYVAR2 will be a/<path to home directory>/b.
+
+# update_check_interval 0.0
+
+#: Periodically check if an update to kitty is available. If an update
+#: is found a system notification is displayed informing you of the
+#: available update. The default is to check every 24 hrs, set to zero
+#: to disable.
+
+# startup_session none
+
+#: Path to a session file to use for all kitty instances. Can be
+#: overridden by using the kitty --session command line option for
+#: individual instances. See
+#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
+#: documentation for details. Note that relative paths are interpreted
+#: with respect to the kitty config directory. Environment variables
+#: in the path are expanded.
+
+# clipboard_control write-clipboard write-primary
+
+#: Allow programs running in kitty to read and write from the
+#: clipboard. You can control exactly which actions are allowed. The
+#: set of possible actions is: write-clipboard read-clipboard write-
+#: primary read-primary. You can additionally specify no-append to
+#: disable kitty's protocol extension for clipboard concatenation. The
+#: default is to allow writing to the clipboard and primary selection
+#: with concatenation enabled. Note that enabling the read
+#: functionality is a security risk as it means that any program, even
+#: one running on a remote server via SSH can read your clipboard.
+
+# term xterm-kitty
+
+#: The value of the TERM environment variable to set. Changing this
+#: can break many terminal programs, only change it if you know what
+#: you are doing, not because you read some advice on Stack Overflow
+#: to change it. The TERM variable is used by various programs to get
+#: information about the capabilities and behavior of the terminal. If
+#: you change it, depending on what programs you run, and how
+#: different the terminal you are changing it to is, various things
+#: from key-presses, to colors, to various advanced features may not
+#: work.
+
+#: }}}
+
+#: OS specific tweaks {{{
+
+# macos_titlebar_color system
+
+#: Change the color of the kitty window's titlebar on macOS. A value
+#: of system means to use the default system color, a value of
+#: background means to use the background color of the currently
+#: active window and finally you can use an arbitrary color, such as
+#: #12af59 or red. WARNING: This option works by using a hack, as
+#: there is no proper Cocoa API for it. It sets the background color
+#: of the entire window and makes the titlebar transparent. As such it
+#: is incompatible with background_opacity. If you want to use both,
+#: you are probably better off just hiding the titlebar with
+#: hide_window_decorations.
+
+# macos_option_as_alt no
+
+#: Use the option key as an alt key. With this set to no, kitty will
+#: use the macOS native Option+Key = unicode character behavior. This
+#: will break any Alt+key keyboard shortcuts in your terminal
+#: programs, but you can use the macOS unicode input technique. You
+#: can use the values: left, right, or both to use only the left,
+#: right or both Option keys as Alt, instead.
+
+# macos_hide_from_tasks no
+
+#: Hide the kitty window from running tasks (Option+Tab) on macOS.
+
+# macos_quit_when_last_window_closed no
+
+#: Have kitty quit when all the top-level windows are closed. By
+#: default, kitty will stay running, even with no open windows, as is
+#: the expected behavior on macOS.
+
+# macos_window_resizable yes
+
+#: Disable this if you want kitty top-level (OS) windows to not be
+#: resizable on macOS.
+
+# macos_thicken_font 0
+
+#: Draw an extra border around the font with the given width, to
+#: increase legibility at small font sizes. For example, a value of
+#: 0.75 will result in rendering that looks similar to sub-pixel
+#: antialiasing at common font sizes.
+
+# macos_traditional_fullscreen no
+
+#: Use the traditional full-screen transition, that is faster, but
+#: less pretty.
+
+# macos_show_window_title_in all
+
+#: Show or hide the window title in the macOS window or menu-bar. A
+#: value of window will show the title of the currently active window
+#: at the top of the macOS window. A value of menubar will show the
+#: title of the currently active window in the macOS menu-bar, making
+#: use of otherwise wasted space. all will show the title everywhere
+#: and none hides the title in the window and the menu-bar.
+
+# macos_custom_beam_cursor no
+
+#: Enable/disable custom mouse cursor for macOS that is easier to see
+#: on both light and dark backgrounds. WARNING: this might make your
+#: mouse cursor invisible on dual GPU machines.
+
+# linux_display_server auto
+
+#: Choose between Wayland and X11 backends. By default, an appropriate
+#: backend based on the system state is chosen automatically. Set it
+#: to x11 or wayland to force the choice.
+
+#: }}}
+
+#: Keyboard shortcuts {{{
+
+#: For a list of key names, see: GLFW keys
+#: <https://www.glfw.org/docs/latest/group__keys.html>. The name to
+#: use is the part after the GLFW_KEY_ prefix. For a list of modifier
+#: names, see: GLFW mods
+#: <https://www.glfw.org/docs/latest/group__mods.html>
+
+#: On Linux you can also use XKB key names to bind keys that are not
+#: supported by GLFW. See XKB keys
+#: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
+#: keysyms.h> for a list of key names. The name to use is the part
+#: after the XKB_KEY_ prefix. Note that you should only use an XKB key
+#: name for keys that are not present in the list of GLFW keys.
+
+#: Finally, you can use raw system key codes to map keys. To see the
+#: system key code for a key, start kitty with the kitty --debug-
+#: keyboard option. Then kitty will output some debug text for every
+#: key event. In that text look for ``native_code`` the value of that
+#: becomes the key name in the shortcut. For example:
+
+#: .. code-block:: none
+
+#:     on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'
+
+#: Here, the key name for the A key is 0x61 and you can use it with::
+
+#:     map ctrl+0x61 something
+
+#: to map ctrl+a to something.
+
+#: You can use the special action no_op to unmap a keyboard shortcut
+#: that is assigned in the default configuration::
+
+#:     map kitty_mod+space no_op
+
+#: You can combine multiple actions to be triggered by a single
+#: shortcut, using the syntax below::
+
+#:     map key combine <separator> action1 <separator> action2 <separator> action3 ...
+
+#: For example::
+
+#:     map kitty_mod+e combine : new_window : next_layout
+
+#: this will create a new window and switch to the next available
+#: layout
+
+#: You can use multi-key shortcuts using the syntax shown below::
+
+#:     map key1>key2>key3 action
+
+#: For example::
+
+#:     map ctrl+f>2 set_font_size 20
+
+# kitty_mod ctrl+shift
+
+#: The value of kitty_mod is used as the modifier for all default
+#: shortcuts, you can change it in your kitty.conf to change the
+#: modifiers for all the default shortcuts.
+
+# clear_all_shortcuts no
+
+#: You can have kitty remove all shortcut definition seen up to this
+#: point. Useful, for instance, to remove the default shortcuts.
+
+# kitten_alias hints hints --hints-offset=0
+
+#: You can create aliases for kitten names, this allows overriding the
+#: defaults for kitten options and can also be used to shorten
+#: repeated mappings of the same kitten with a specific group of
+#: options. For example, the above alias changes the default value of
+#: kitty +kitten hints --hints-offset to zero for all mappings,
+#: including the builtin ones.
+
+#: Clipboard {{{
+
+# map kitty_mod+c copy_to_clipboard
+
+#: There is also a copy_or_interrupt action that can be optionally
+#: mapped to Ctrl+c. It will copy only if there is a selection and
+#: send an interrupt otherwise.
+
+# map kitty_mod+v  paste_from_clipboard
+# map kitty_mod+s  paste_from_selection
+# map shift+insert paste_from_selection
+# map kitty_mod+o  pass_selection_to_program
+
+#: You can also pass the contents of the current selection to any
+#: program using pass_selection_to_program. By default, the system's
+#: open program is used, but you can specify your own, the selection
+#: will be passed as a command line argument to the program, for
+#: example::
+
+#:     map kitty_mod+o pass_selection_to_program firefox
+
+#: You can pass the current selection to a terminal program running in
+#: a new kitty window, by using the @selection placeholder::
+
+#:     map kitty_mod+y new_window less @selection
+
+#: }}}
+
+#: Scrolling {{{
+
+# map kitty_mod+up        scroll_line_up
+# map kitty_mod+k         scroll_line_up
+# map kitty_mod+down      scroll_line_down
+# map kitty_mod+j         scroll_line_down
+# map kitty_mod+page_up   scroll_page_up
+# map kitty_mod+page_down scroll_page_down
+# map kitty_mod+home      scroll_home
+# map kitty_mod+end       scroll_end
+# map kitty_mod+h         show_scrollback
+
+#: You can pipe the contents of the current screen + history buffer as
+#: STDIN to an arbitrary program using the ``pipe`` function. For
+#: example, the following opens the scrollback buffer in less in an
+#: overlay window::
+
+#:     map f1 pipe @ansi overlay less +G -R
+
+#: For more details on piping screen and buffer contents to external
+#: programs, see pipe.
+
+#: }}}
+
+#: Window management {{{
+
+# map kitty_mod+enter new_window
+
+#: You can open a new window running an arbitrary program, for
+#: example::
+
+#:     map kitty_mod+y      new_window mutt
+
+#: You can open a new window with the current working directory set to
+#: the working directory of the current window using::
+
+#:     map ctrl+alt+enter    new_window_with_cwd
+
+#: You can open a new window that is allowed to control kitty via the
+#: kitty remote control facility by prefixing the command line with @.
+#: Any programs running in that window will be allowed to control
+#: kitty. For example::
+
+#:     map ctrl+enter new_window @ some_program
+
+#: You can open a new window next to the currently active window or as
+#: the first window, with::
+
+#:     map ctrl+n new_window !neighbor some_program
+#:     map ctrl+f new_window !first some_program
+
+# map kitty_mod+n new_os_window
+
+#: Works like new_window above, except that it opens a top level OS
+#: kitty window. In particular you can use new_os_window_with_cwd to
+#: open a window with the current working directory.
+
+# map kitty_mod+w close_window
+# map kitty_mod+] next_window
+# map kitty_mod+[ previous_window
+# map kitty_mod+f move_window_forward
+# map kitty_mod+b move_window_backward
+# map kitty_mod+` move_window_to_top
+# map kitty_mod+r start_resizing_window
+# map kitty_mod+1 first_window
+# map kitty_mod+2 second_window
+# map kitty_mod+3 third_window
+# map kitty_mod+4 fourth_window
+# map kitty_mod+5 fifth_window
+# map kitty_mod+6 sixth_window
+# map kitty_mod+7 seventh_window
+# map kitty_mod+8 eighth_window
+# map kitty_mod+9 ninth_window
+# map kitty_mod+0 tenth_window
+#: }}}
+
+#: Tab management {{{
+
+# map kitty_mod+right next_tab
+# map kitty_mod+left  previous_tab
+# map kitty_mod+t     new_tab
+# map kitty_mod+q     close_tab
+# map kitty_mod+.     move_tab_forward
+# map kitty_mod+,     move_tab_backward
+# map kitty_mod+alt+t set_tab_title
+
+#: You can also create shortcuts to go to specific tabs, with 1 being
+#: the first tab, 2 the second tab and -1 being the previously active
+#: tab::
+
+#:     map ctrl+alt+1 goto_tab 1
+#:     map ctrl+alt+2 goto_tab 2
+
+#: Just as with new_window above, you can also pass the name of
+#: arbitrary commands to run when using new_tab and use
+#: new_tab_with_cwd. Finally, if you want the new tab to open next to
+#: the current tab rather than at the end of the tabs list, use::
+
+#:     map ctrl+t new_tab !neighbor [optional cmd to run]
+#: }}}
+
+#: Layout management {{{
+
+# map kitty_mod+l next_layout
+
+#: You can also create shortcuts to switch to specific layouts::
+
+#:     map ctrl+alt+t goto_layout tall
+#:     map ctrl+alt+s goto_layout stack
+
+#: Similarly, to switch back to the previous layout::
+
+#:    map ctrl+alt+p last_used_layout
+#: }}}
+
+#: Font sizes {{{
+
+#: You can change the font size for all top-level kitty OS windows at
+#: a time or only the current one.
+
+# map kitty_mod+equal     change_font_size all +2.0
+# map kitty_mod+minus     change_font_size all -2.0
+# map kitty_mod+backspace change_font_size all 0
+
+#: To setup shortcuts for specific font sizes::
+
+#:     map kitty_mod+f6 change_font_size all 10.0
+
+#: To setup shortcuts to change only the current OS window's font
+#: size::
+
+#:     map kitty_mod+f6 change_font_size current 10.0
+#: }}}
+
+#: Select and act on visible text {{{
+
+#: Use the hints kitten to select text and either pass it to an
+#: external program or insert it into the terminal or copy it to the
+#: clipboard.
+
+# map kitty_mod+e kitten hints
+
+#: Open a currently visible URL using the keyboard. The program used
+#: to open the URL is specified in open_url_with.
+
+# map kitty_mod+p>f kitten hints --type path --program -
+
+#: Select a path/filename and insert it into the terminal. Useful, for
+#: instance to run git commands on a filename output from a previous
+#: git command.
+
+# map kitty_mod+p>shift+f kitten hints --type path
+
+#: Select a path/filename and open it with the default open program.
+
+# map kitty_mod+p>l kitten hints --type line --program -
+
+#: Select a line of text and insert it into the terminal. Use for the
+#: output of things like: ls -1
+
+# map kitty_mod+p>w kitten hints --type word --program -
+
+#: Select words and insert into terminal.
+
+# map kitty_mod+p>h kitten hints --type hash --program -
+
+#: Select something that looks like a hash and insert it into the
+#: terminal. Useful with git, which uses sha1 hashes to identify
+#: commits
+
+
+#: The hints kitten has many more modes of operation that you can map
+#: to different shortcuts. For a full description see kittens/hints.
+#: }}}
+
+#: Miscellaneous {{{
+
+# map kitty_mod+f11    toggle_fullscreen
+# map kitty_mod+f10    toggle_maximized
+# map kitty_mod+u      kitten unicode_input
+# map kitty_mod+f2     edit_config_file
+# map kitty_mod+escape kitty_shell window
+
+#: Open the kitty shell in a new window/tab/overlay/os_window to
+#: control kitty using commands.
+
+# map kitty_mod+a>m    set_background_opacity +0.1
+# map kitty_mod+a>l    set_background_opacity -0.1
+# map kitty_mod+a>1    set_background_opacity 1
+# map kitty_mod+a>d    set_background_opacity default
+# map kitty_mod+delete clear_terminal reset active
+
+#: You can create shortcuts to clear/reset the terminal. For example::
+
+#:     # Reset the terminal
+#:     map kitty_mod+f9 clear_terminal reset active
+#:     # Clear the terminal screen by erasing all contents
+#:     map kitty_mod+f10 clear_terminal clear active
+#:     # Clear the terminal scrollback by erasing it
+#:     map kitty_mod+f11 clear_terminal scrollback active
+#:     # Scroll the contents of the screen into the scrollback
+#:     map kitty_mod+f12 clear_terminal scroll active
+
+#: If you want to operate on all windows instead of just the current
+#: one, use all instead of active.
+
+#: It is also possible to remap Ctrl+L to both scroll the current
+#: screen contents into the scrollback buffer and clear the screen,
+#: instead of just clearing the screen::
+
+#:     map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c
+
+
+#: You can tell kitty to send arbitrary (UTF-8) encoded text to the
+#: client program when pressing specified shortcut keys. For example::
+
+#:     map ctrl+alt+a send_text all Special text
+
+#: This will send "Special text" when you press the ctrl+alt+a key
+#: combination.  The text to be sent is a python string literal so you
+#: can use escapes like \x1b to send control codes or \u21fb to send
+#: unicode characters (or you can just input the unicode characters
+#: directly as UTF-8 text). The first argument to send_text is the
+#: keyboard modes in which to activate the shortcut. The possible
+#: values are normal or application or kitty or a comma separated
+#: combination of them.  The special keyword all means all modes. The
+#: modes normal and application refer to the DECCKM cursor key mode
+#: for terminals, and kitty refers to the special kitty extended
+#: keyboard protocol.
+
+#: Another example, that outputs a word and then moves the cursor to
+#: the start of the line (same as pressing the Home key)::
+
+#:     map ctrl+alt+a send_text normal Word\x1b[H
+#:     map ctrl+alt+a send_text application Word\x1bOH
+
+#: }}}
+
+# }}}
diff --git a/dotfiles/.config/qutebrowser/config.py b/dotfiles/.config/qutebrowser/config.py
new file mode 100644
index 0000000..3c4c25b
--- /dev/null
+++ b/dotfiles/.config/qutebrowser/config.py
@@ -0,0 +1,362 @@
+# Uncomment this to still load settings configured via autoconfig.yml
+config.load_autoconfig()
+
+ultramar = {
+    'base03': '#1b1e25',
+    'base02': '#2d333f',
+    'base01': '#e5e9f0',
+    'base00': '#434c5e',
+    'base0': '#3b4252',
+    'base1': '#242933',
+    'base2': '#d8dee9',
+    'base3': '#e5e9f0',
+    'yellow': '#e2b55a',
+    'orange': '#af5539',
+    'red': '#b73030',
+    'magenta': '#b48ead',
+    'violet': '#9c6992',
+    'blue': '#3f6e90',
+    'cyan': '#5b8277',
+    'green': '#7ea95a'
+}
+
+## Default monospace fonts
+c.fonts.monospace = '"BlexMono Nerd Font Mono", "DejaVu Sans Mono"'
+
+## Background color of the completion widget category headers.
+## Type: QssColor
+c.colors.completion.category.bg = ultramar['base03']
+
+## Bottom border color of the completion widget category headers.
+## Type: QssColor
+c.colors.completion.category.border.bottom = ultramar['base03']
+
+## Top border color of the completion widget category headers.
+## Type: QssColor
+c.colors.completion.category.border.top = ultramar['base03']
+
+## Foreground color of completion widget category headers.
+## Type: QtColor
+c.colors.completion.category.fg = ultramar['base3']
+
+## Background color of the completion widget for even rows.
+## Type: QssColor
+c.colors.completion.even.bg = ultramar['base02']
+
+## Text color of the completion widget.
+## Type: QtColor
+c.colors.completion.fg = ultramar['base3']
+
+## Background color of the selected completion item.
+## Type: QssColor
+c.colors.completion.item.selected.bg = ultramar['cyan']
+
+## Bottom border color of the selected completion item.
+## Type: QssColor
+c.colors.completion.item.selected.border.bottom = ultramar['cyan']
+
+## Top border color of the completion widget category headers.
+## Type: QssColor
+c.colors.completion.item.selected.border.top = ultramar['cyan']
+
+## Foreground color of the selected completion item.
+## Type: QtColor
+c.colors.completion.item.selected.fg = ultramar['base03']
+
+## Foreground color of the matched text in the completion.
+## Type: QssColor
+c.colors.completion.match.fg = ultramar['yellow']
+
+## Background color of the completion widget for odd rows.
+## Type: QssColor
+c.colors.completion.odd.bg = ultramar['base0']
+
+## Color of the scrollbar in completion view
+## Type: QssColor
+c.colors.completion.scrollbar.bg = ultramar['base0']
+
+## Color of the scrollbar handle in completion view.
+## Type: QssColor
+c.colors.completion.scrollbar.fg = ultramar['base2']
+
+## Background color for the download bar.
+## Type: QssColor
+c.colors.downloads.bar.bg = ultramar['base03']
+
+## Background color for downloads with errors.
+## Type: QtColor
+c.colors.downloads.error.bg = ultramar['red']
+
+## Foreground color for downloads with errors.
+## Type: QtColor
+c.colors.downloads.error.fg = ultramar['base3']
+
+## Color gradient start for download backgrounds.
+## Type: QtColor
+# c.colors.downloads.start.bg = '#0000aa'
+
+## Color gradient start for download text.
+## Type: QtColor
+c.colors.downloads.start.fg = ultramar['base3']
+
+## Color gradient stop for download backgrounds.
+## Type: QtColor
+# c.colors.downloads.stop.bg = '#00aa00'
+
+## Color gradient end for download text.
+## Type: QtColor
+# c.colors.downloads.stop.fg = ultramar['base3']
+
+## Color gradient interpolation system for download backgrounds.
+## Type: ColorSystem
+## Valid values:
+##   - rgb: Interpolate in the RGB color system.
+##   - hsv: Interpolate in the HSV color system.
+##   - hsl: Interpolate in the HSL color system.
+##   - none: Don't show a gradient.
+# c.colors.downloads.system.bg = 'rgb'
+
+## Color gradient interpolation system for download text.
+## Type: ColorSystem
+## Valid values:
+##   - rgb: Interpolate in the RGB color system.
+##   - hsv: Interpolate in the HSV color system.
+##   - hsl: Interpolate in the HSL color system.
+##   - none: Don't show a gradient.
+# c.colors.downloads.system.fg = 'rgb'
+
+## CSS border value for hints
+c.hints.border = '1px solid ' + ultramar['base03'];
+
+## Background color for hints. Note that you can use a `rgba(...)` value
+## for transparency.
+## Type: QssColor
+c.colors.hints.bg = ultramar['cyan']
+
+## Font color for hints.
+## Type: QssColor
+c.colors.hints.fg = ultramar['base3']
+
+## Font color for the matched part of hints.
+## Type: QssColor
+c.colors.hints.match.fg = ultramar['base03']
+
+## Background color of the keyhint widget.
+## Type: QssColor
+c.colors.keyhint.bg = 'rgba(27, 30, 37, 80%)'
+
+## Text color for the keyhint widget.
+## Type: QssColor
+c.colors.keyhint.fg = ultramar['base3']
+
+## Highlight color for keys to complete the current keychain.
+## Type: QssColor
+c.colors.keyhint.suffix.fg = ultramar['yellow']
+
+## Background color of an error message.
+## Type: QssColor
+c.colors.messages.error.bg = ultramar['red']
+
+## Border color of an error message.
+## Type: QssColor
+c.colors.messages.error.border = ultramar['red']
+
+## Foreground color of an error message.
+## Type: QssColor
+c.colors.messages.error.fg = ultramar['base3']
+
+## Background color of an info message.
+## Type: QssColor
+c.colors.messages.info.bg = ultramar['base03']
+
+## Border color of an info message.
+## Type: QssColor
+c.colors.messages.info.border = ultramar['base03']
+
+## Foreground color an info message.
+## Type: QssColor
+c.colors.messages.info.fg = ultramar['base3']
+
+## Background color of a warning message.
+## Type: QssColor
+c.colors.messages.warning.bg = ultramar['orange']
+
+## Border color of a warning message.
+## Type: QssColor
+c.colors.messages.warning.border = ultramar['orange']
+
+## Foreground color a warning message.
+## Type: QssColor
+c.colors.messages.warning.fg = ultramar['base3']
+
+## Background color for prompts.
+## Type: QssColor
+c.colors.prompts.bg = ultramar['base02']
+
+## Border used around UI elements in prompts.
+## Type: String
+c.colors.prompts.border = '1px solid ' + ultramar['base3']
+
+## Foreground color for prompts.
+## Type: QssColor
+c.colors.prompts.fg = ultramar['base3']
+
+## Background color for the selected item in filename prompts.
+## Type: QssColor
+c.colors.prompts.selected.bg = ultramar['base01']
+
+## Background color of the statusbar in caret mode.
+## Type: QssColor
+c.colors.statusbar.caret.bg = ultramar['violet']
+
+## Foreground color of the statusbar in caret mode.
+## Type: QssColor
+c.colors.statusbar.caret.fg = ultramar['base3']
+
+## Background color of the statusbar in caret mode with a selection.
+## Type: QssColor
+c.colors.statusbar.caret.selection.bg = ultramar['violet']
+
+## Foreground color of the statusbar in caret mode with a selection.
+## Type: QssColor
+c.colors.statusbar.caret.selection.fg = ultramar['base3']
+
+## Background color of the statusbar in command mode.
+## Type: QssColor
+c.colors.statusbar.command.bg = ultramar['base03']
+
+## Foreground color of the statusbar in command mode.
+## Type: QssColor
+c.colors.statusbar.command.fg = ultramar['base3']
+
+## Background color of the statusbar in private browsing + command mode.
+## Type: QssColor
+c.colors.statusbar.command.private.bg = ultramar['magenta']
+
+## Foreground color of the statusbar in private browsing + command mode.
+## Type: QssColor
+c.colors.statusbar.command.private.fg = ultramar['base3']
+
+## Background color of the statusbar in insert mode.
+## Type: QssColor
+c.colors.statusbar.insert.bg = ultramar['green']
+
+## Foreground color of the statusbar in insert mode.
+## Type: QssColor
+c.colors.statusbar.insert.fg = ultramar['base0']
+
+## Background color of the statusbar.
+## Type: QssColor
+c.colors.statusbar.normal.bg = ultramar['base03']
+
+## Foreground color of the statusbar.
+## Type: QssColor
+c.colors.statusbar.normal.fg = ultramar['base3']
+
+## Background color of the statusbar in passthrough mode.
+## Type: QssColor
+c.colors.statusbar.passthrough.bg = ultramar['blue']
+
+## Foreground color of the statusbar in passthrough mode.
+## Type: QssColor
+c.colors.statusbar.passthrough.fg = ultramar['base3']
+
+## Background color of the statusbar in private browsing mode.
+## Type: QssColor
+c.colors.statusbar.private.bg = ultramar['magenta']
+
+## Foreground color of the statusbar in private browsing mode.
+## Type: QssColor
+c.colors.statusbar.private.fg = ultramar['base3']
+
+## Background color of the progress bar.
+## Type: QssColor
+c.colors.statusbar.progress.bg = ultramar['base3']
+
+## Foreground color of the URL in the statusbar on error.
+## Type: QssColor
+c.colors.statusbar.url.error.fg = ultramar['red']
+
+## Default foreground color of the URL in the statusbar.
+## Type: QssColor
+c.colors.statusbar.url.fg = ultramar['base3']
+
+## Foreground color of the URL in the statusbar for hovered links.
+## Type: QssColor
+c.colors.statusbar.url.hover.fg = ultramar['blue']
+
+## Foreground color of the URL in the statusbar on successful load
+## (http).
+## Type: QssColor
+c.colors.statusbar.url.success.http.fg = ultramar['base3']
+
+## Foreground color of the URL in the statusbar on successful load
+## (https).
+## Type: QssColor
+c.colors.statusbar.url.success.https.fg = ultramar['cyan']
+
+## Foreground color of the URL in the statusbar when there's a warning.
+## Type: QssColor
+c.colors.statusbar.url.warn.fg = ultramar['yellow']
+
+## Background color of the tab bar.
+## Type: QtColor
+c.colors.tabs.bar.bg = ultramar['base03']
+
+## Background color of unselected even tabs.
+## Type: QtColor
+c.colors.tabs.even.bg = ultramar['base00']
+
+## Foreground color of unselected even tabs.
+## Type: QtColor
+c.colors.tabs.even.fg = ultramar['base2']
+
+## Color for the tab indicator on errors.
+## Type: QtColor
+c.colors.tabs.indicator.error = ultramar['red']
+
+## Color gradient start for the tab indicator.
+## Type: QtColor
+c.colors.tabs.indicator.start = ultramar['blue']
+
+## Color gradient end for the tab indicator.
+## Type: QtColor
+c.colors.tabs.indicator.stop = ultramar['cyan']
+
+## Color gradient interpolation system for the tab indicator.
+## Type: ColorSystem
+## Valid values:
+##   - rgb: Interpolate in the RGB color system.
+##   - hsv: Interpolate in the HSV color system.
+##   - hsl: Interpolate in the HSL color system.
+##   - none: Don't show a gradient.
+# c.colors.tabs.indicator.system = 'rgb'
+
+## Background color of unselected odd tabs.
+## Type: QtColor
+c.colors.tabs.odd.bg = ultramar['base0']
+
+## Foreground color of unselected odd tabs.
+## Type: QtColor
+c.colors.tabs.odd.fg = ultramar['base2']
+
+## Background color of selected even tabs.
+## Type: QtColor
+c.colors.tabs.selected.even.bg = ultramar['base03']
+
+## Foreground color of selected even tabs.
+## Type: QtColor
+c.colors.tabs.selected.even.fg = ultramar['base3']
+
+## Background color of selected odd tabs.
+## Type: QtColor
+c.colors.tabs.selected.odd.bg = ultramar['base03']
+
+## Foreground color of selected odd tabs.
+## Type: QtColor
+c.colors.tabs.selected.odd.fg = ultramar['base3']
+
+## Background color for webpages if unset (or empty to use the theme's
+## color)
+## Type: QtColor
+# c.colors.webpage.bg = 'white'
diff --git a/dotfiles/.config/ranger/scope.sh b/dotfiles/.config/ranger/scope.sh
index 13a25b4..940c9ba 100755
--- a/dotfiles/.config/ranger/scope.sh
+++ b/dotfiles/.config/ranger/scope.sh
@@ -90,9 +90,9 @@ handle_image() {
     local mimetype="${1}"
     case "${mimetype}" in
         # SVG
-        # image/svg+xml)
-        #     convert "${FILE_PATH}" "${IMAGE_CACHE_PATH}" && exit 6
-        #     exit 1;;
+        image/svg+xml)
+            convert "${FILE_PATH}" "${IMAGE_CACHE_PATH}" && exit 6
+            exit 1;;
 
         # Image
         image/*)
diff --git a/dotfiles/.config/sway/config b/dotfiles/.config/sway/config
index efff51c..f1f82e8 100644
--- a/dotfiles/.config/sway/config
+++ b/dotfiles/.config/sway/config
@@ -19,7 +19,7 @@ hide_edge_borders both
 
 # Font for window titles. Will also be used by the bar unless a different font
 # is used in the bar {} block below.
-font pango:FuraCode Nerd Font Mono 10
+font pango:BlexMono Nerd Font Mono 10
 
 # Use Mouse+$mod to drag floating windows
 floating_modifier $mod
@@ -27,14 +27,14 @@ floating_modifier $mod
 
 ##### Startup scripts and programs #####
 # Waybar
-exec_always waybar_launch
+exec --no-startup-id waybar_launch
 # KDE Connect
 exec --no-startup-id kdeconnect-indicator
 # Mopidy music daemon
 # exec_always --no-startup-id ~/.scripts/mopidy_launch
 exec --no-startup-id mpd
 # Bluetooth adapter applet
-exec_always --no-startup-id blueman-applet
+#exec_always --no-startup-id blueman-applet
 # Motification handler
 exec --no-startup-id mako_launch
 # NetworkManager Applet
@@ -91,17 +91,18 @@ for_window [app_id="telegramdesktop"] floating enable, sticky enable
 
 # Quake-like Terminal dropdown
 for_window [title="quakemite"] floating enable, sticky enable
+for_window [title="quakemite"] border none
 
 # switch to workspace with urgent window automatically
 # for_window [urgent=latest] focus
 
 # Theme colors
 # class                   border  backgr. text    indic.  child_border
-  client.focused          #212121 #212121 #8EC07C #FDF6E3 #689D6A
-  client.focused_inactive #000000 #151515 #689D6A #454948 #000000
-  client.unfocused        #000000 #151515 #EBDBB2 #454948 #000000
+  client.focused          #212121 #212121 #8EC07C #81acc1 #434C5E
+  client.focused_inactive #000000 #151515 #689D6A #1d2021 #1B1E25
+  client.unfocused        #000000 #151515 #EBDBB2 #1d2021 #1B1E25
   client.urgent           #CB4B16 #FDF6E3 #1ABC9C #268BD2 #CB4B16
-  client.placeholder      #FFFFFF #0c0c0c #ffffff #FFFFFF #FFFFFF
+  client.placeholder      #FFFFFF #0c0c0c #ffffff #FFFFFF #3f6e90
 
   client.background       #2B2C2B
 
@@ -110,7 +111,6 @@ for_window [title="quakemite"] floating enable, sticky enable
 
 # Outputs
 output "*" background ~/.config/wall1.png fill
-output "eDP-1" scale 1.53 pos 0 0
 
 # Keymaps
 input * xkb_layout "us,es,ru"
@@ -180,9 +180,10 @@ bindsym --to-code {
     $mod+Shift+w exec --no-startup-id $browser
     $mod+F3 exec menudisplay
     $mod+F4 exec menublk
-    $mod+r exec $term -e vifm
+    $mod+r exec kitty -e ranger
     $mod+s exec "xway steam"
     $mod+m exec $term -e ncmpcpp
+    $mod+Ctrl+v exec $term -e vis
     $mod+o exec --no-startup-id notistats
     $mod+c exec --no-startup-id camtoggle
     $mod+grave exec --no-startup-id menuducksearch
diff --git a/dotfiles/.config/termite/config b/dotfiles/.config/termite/config
index 1cab051..f5ffb37 100644
--- a/dotfiles/.config/termite/config
+++ b/dotfiles/.config/termite/config
@@ -2,49 +2,50 @@
 # Base16 Gruvbox dark, hard
 # Author = Dawid Kurek (dawikur@gmail.com), morhetz (https =//github.com/morhetz/gruvbox)
 
-foreground          = #d5c4a1
-foreground_bold     = #ebdbb2
-cursor              = #ebdbb2
-cursor_foreground   = #1d2021
-background          = rgba(32, 32, 33, 0.9)
+foreground          = #e5e9f0
+foreground_bold     = #d8dee9
+cursor              = #d8dee9
+cursor_foreground   = #d8dee9
+background          = rgba(27, 30, 37, 0.98)
+# #1b1e25
 
 # 16 color space
 
 # Black, Gray, Silver, White
 color0  = #1d2021
-color8  = #665c54
-color7  = #d5c4a1
-color15 = #fbf1c7
+color8  = #434c5e
+color7  = #a1a6b2
+color15 = #e5e9f0
 
 # DarkRed + Red
-color1 =  #cc241d
-color9 =  #fb4934
+color1 =  #b73030
+color9 =  #c45c5c
 # DarkGreen + Green
-color2 =  #98971a
-color10 = #b8bb26
+color2 =  #7ea95a
+color10 = #9eba86
 # DarkYellow + Yellow
-color3 =  #d79921
-color11 = #fabd2f
+color3 =  #b2872f
+color11 = #e2b55a
 # DarkBlue + Blue
-color4 =  #458588
-color12 = #83a598
+color4 =  #3f6e90
+color12 = #81acc1
 # DarkMagenta + Magenta
-color5 =  #b16286
-color13 = #d3869b
+color5 =  #9c6992
+color13 = #b48ead
 # DarkCyan + Cyan
-color6 =  #689d6a
-color14 = #8ec07c
+color6 =  #5b8277
+color14 = #7fac96
 
 # Extra colors
-color16 = #fe8019
-color17 = #d65d0e
-color18 = #3c3836
-color19 = #504945
-color20 = #bdae93
-color21 = #ebdbb2
+color16 = #d08770
+color17 = #af5539
+color18 = #2d333f
+color19 = #3b4252
+color20 = #697792
+color21 = #d8dee9
 
 [options]
-font = FuraCode Nerd Font Mono 11
+font = BlexMono Nerd Font Mono 10
 allow_bold = true
 cursor_shape = underline
 mouse_autohide = true
diff --git a/dotfiles/.config/vis/colors/custom1 b/dotfiles/.config/vis/colors/custom1
deleted file mode 100644
index 1679079..0000000
--- a/dotfiles/.config/vis/colors/custom1
+++ /dev/null
@@ -1,3 +0,0 @@
-#458588
-#689d6a
-#cc241d
diff --git a/dotfiles/.config/vis/colors/ultramar b/dotfiles/.config/vis/colors/ultramar
new file mode 100644
index 0000000..a450e62
--- /dev/null
+++ b/dotfiles/.config/vis/colors/ultramar
@@ -0,0 +1,4 @@
+#5b8277
+#81acc1
+#af5539
+#b73030
diff --git a/dotfiles/.config/vis/config b/dotfiles/.config/vis/config
index 850db21..f0f39a7 100644
--- a/dotfiles/.config/vis/config
+++ b/dotfiles/.config/vis/config
@@ -5,7 +5,7 @@ audio.sources=pulse
 
 audio.stereo.enabled=false
 
-colors.scheme=custom1
+colors.scheme=ultramar
 
 #Available smoothing options are monstercat, sgs, none.
 visualizer.spectrum.smoothing.mode=monstercat
diff --git a/dotfiles/.config/waybar/config b/dotfiles/.config/waybar/config
index 6ff853e..af43745 100644
--- a/dotfiles/.config/waybar/config
+++ b/dotfiles/.config/waybar/config
@@ -4,30 +4,29 @@
     "height": 25,
     "modules-left": [
         "sway/workspaces",
-        "custom/right-arrow-black",
         "sway/mode",
+        "custom/left-decorator-black",
         "mpd",
-        "pulseaudio",
-        "custom/right-arrow-cyan"
+        "pulseaudio"
+    ],
+    "modules-center": [
+        "clock",
+        "custom/weather"
     ],
-    "modules-center": ["clock"],
     "modules-right": [
-        "custom/left-arrow-cyan",
         "custom/swaykbd",
-        "custom/weather",
         "backlight",
-        "custom/left-arrow-gray",
         "network",
         "battery#bat0",
         "battery#bat1",
-        "custom/left-arrow-black",
+        "custom/right-decorator-black",
         "tray"
     ],
     "sway/mode": {
         "format": "<span style=\"italic\">{}</span>"
     },
     "mpd": {
-        "format": " {stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}{artist} - {title} [{elapsedTime:%M:%S}] ",
+        "format": " {stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon} {artist} - {title} [{elapsedTime:%M:%S}]",
         "format-disconnected": " Disconnected ",
         "format-stopped": " {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}Stopped ",
         "unknown-tag": "N/A",
@@ -36,8 +35,7 @@
             "on": " "
         },
         "random-icons": {
-            "off": "<span color=\"#f53c3c\"></span> ",
-            "on": " "
+            "on": ""
         },
         "repeat-icons": {
             "on": " "
@@ -46,8 +44,8 @@
             "on": "1 "
         },
         "state-icons": {
-            "paused": "",
-            "playing": ""
+            "paused": "<span color=\"#b2872f\"></span>",
+            "playing": "<span color=\"#5b8277\"></span>"
         },
         "tooltip-format": "MPD (connected)",
         "tooltip-format-disconnected": "MPD (disconnected)"
@@ -89,24 +87,36 @@
     },
     "battery#bat0": {
         "bat": "BAT0",
-        "format": "{capacity}% {icon}",
-        "format-charging": "{capacity}% ",
-        "format-plugged": "{capacity}% ",
-        "format-icons": ["", "", "", "", ""]
+        "format": "{icon} {capacity}%",
+        "format-charging": " <span color=\"#5b8277\"></span> {capacity}%",
+        "format-plugged": "<span color=\"#5b8277\"></span> {capacity}%",
+        "format-icons": [
+            "<span color=\"#b73030\"></span>",
+            "<span color=\"#b2872f\"></span>",
+            "<span color=\"#5b8277\"></span>",
+            "<span color=\"#5b8277\"></span>",
+            "<span color=\"#5b8277\"></span>"
+        ]
     },
     "battery#bat1": {
         "bat": "BAT1",
-        "format": "{capacity}% {icon}",
-        "format-charging": "{capacity}% ",
-        "format-plugged": "{capacity}% ",
-        "format-icons": ["", "", "", "", ""]
+        "format": "{icon} {capacity}%",
+        "format-charging": " <span color=\"#5b8277\"></span> {capacity}%",
+        "format-plugged": "<span color=\"#5b8277\"></span> {capacity}%",
+        "format-icons": [
+            "<span color=\"#b73030\"></span>",
+            "<span color=\"#b2872f\"></span>",
+            "<span color=\"#5b8277\"></span>",
+            "<span color=\"#5b8277\"></span>",
+            "<span color=\"#5b8277\"></span>"
+        ]
     },
     "network": {
         // "interface": "wlp2*", // (Optional) To force the use of this interface
-        "format-wifi": "{essid}: {ipaddr} ",
-        "format-ethernet": "{ifname}: {ipaddr} ",
-        "format-linked": "{ifname} (No IP) ",
-        "format-disconnected": "Disconnected ⚠",
+        "format-wifi": "<span color=\"#5b8277\"></span> {essid}: {ipaddr}",
+        "format-ethernet": "<span color=\"#5b8277\"></span> {ifname}: {ipaddr}",
+        "format-linked": "<span color=\"#5b8277\"></span> {ifname} (No IP)",
+        "format-disconnected": "<span color=\"#b73030\">⚠</span> Disconnected",
         "format-alt": "{ifname}: {ipaddr}/{cidr}"
     },
     "custom/left-arrow-cyan": {
@@ -124,11 +134,17 @@
     "custom/right-arrow-black": {
         "format": ""
     },
+    "custom/left-decorator-black": {
+        "format": ""
+    },
+    "custom/right-decorator-black": {
+        "format": ""
+    },
     "pulseaudio": {
-        // "scroll-step": 1, // %, can be a float
-        "format": "{volume}% {icon}",
-        "format-bluetooth": "{volume}% {icon} {format_source}",
-        "format-muted": "",
+        "scroll-step": 5, // %, can be a float
+        "format": "<span color=\"#5b8277\">{icon}</span> {volume}%",
+        "format-bluetooth": "<span color=\"#5b8277\">{icon}</span> {volume}% {format_source}",
+        "format-muted": "<span color=\"#b73030\"></span>",
         "format-source": "{volume}% ",
         "format-source-muted": "",
         "format-icons": {
@@ -153,7 +169,7 @@
         "exec": "$HOME/.scripts/i3barweather"
     },
     "custom/swaykbd": {
-        "format": "{} ",
+        "format": "<span color=\"#5b8277\"></span> {}",
         "exec": "$HOME/.scripts/swaykbd"
     },
     "custom/media": {
diff --git a/dotfiles/.config/waybar/style.css b/dotfiles/.config/waybar/style.css
index 2223844..44bae1e 100644
--- a/dotfiles/.config/waybar/style.css
+++ b/dotfiles/.config/waybar/style.css
@@ -1,16 +1,15 @@
 * {
     font-size: 11px;
-    font-family: "FuraCode Nerd Font Mono";
+    font-family: "BlexMono Nerd Font Mono";
     min-height: 0;
 }
-
 window#waybar {
-    background: rgba(26, 26, 26, 0.75);
-    color: #fdf6e3;
+    background: rgba(27, 30, 37, 0.95);
+    color: #e5e9f0;
     min-height: 0;
 }
 #custom-right-arrow-cyan, #custom-left-arrow-cyan {
-    color: #8ec07c;
+    color: #89b699;
     font-size: 20px;
 }
 #custom-right-arrow-black, #custom-left-arrow-black {
@@ -19,27 +18,24 @@ window#waybar {
 }
 #custom-left-arrow-gray {
     color: #191919;
-    background: #8ec07c;
+    background: #89b699;
     font-size: 20px;
 }
 #custom-right-arrow-black {
-    background: #8ec07c;
+    background: #89b699;
 }
 #custom-left-arrow-black {
     background: #191919;
 }
-#clock.1 {
-    background: #2D888D;
-}
-#clock.2 {
-    color: #1E1F23;
-    background: #DCDCCC;
-}
-#clock.3 {
-    background: #E00421;
+#custom-left-decorator-black,
+#custom-right-decorator-black {
+    font-size: 20px;
+    background: rgba(27, 30, 37, 0.95);
+    color: #000000;
 }
+#tray,
 #workspaces {
-    padding-left: 8px;
+    padding: 0 8px;
     background: #000000;
 }
 #workspaces button {
@@ -47,7 +43,7 @@ window#waybar {
     color: #fdf6e3;
 }
 #workspaces button.focused {
-    color:  #8ec07c;
+    color:  #5b8277;
 }
 #workspaces button:hover {
     box-shadow: inherit;
@@ -58,37 +54,18 @@ window#waybar {
     border-radius: 0;
     background: #0C3D27;
 }
-#tray {
-    background: #000000;
-}
-#memory {
-    background: #ff6e67;
-}
-#pulseaudio,
 #mpd,
-#temperature,
+#clock,
+#battery,
+#network,
 #backlight,
+#pulseaudio,
+#temperature,
 #custom-weather,
 #custom-rec-status,
 #custom-swaykbd {
-    color: #000000;
-    background: #8ec07c;
     padding: 0 8px;
 }
-#cpu {
-    background: #f1fa8c;
-}
-#network,
-#battery{
-    background: #191919;
-    padding: 0 8px;
-}
-#battery.charging {
-    color: #8ec07c;
-}
-#memory, #cpu, #tray {
-    color: #1E1F23;
-}
-#clock{
-    padding: 0 16px;
+#custom-weather {
+    color: #5b8277;
 }