diff options
| -rwxr-xr-x | install.sh | 8 | ||||
| -rw-r--r-- | system/lightdm/lightdm-mini-greeter.conf | 58 | ||||
| -rw-r--r-- | system/lightdm/lightdm.conf | 169 | ||||
| -rwxr-xr-x | system/loader/entries/arch.conf | 4 | ||||
| -rwxr-xr-x | system/loader/loader.conf | 3 | ||||
| -rw-r--r-- | system/mkinitcpio.conf | 66 |
6 files changed, 306 insertions, 2 deletions
@@ -2,10 +2,13 @@ # Install needed programs -pacman -Sy --noconfirm networkmanager network-manager-applet networkmanager-openvpn neovim sway swaylock swayidle waybar egl-wayland imv swaybg xorg-server-xwayland qt5-wayland wl-clipboard dbus tmux htop bemenu mupdf mpd ncmpcpp mpc mpv mplayer mako cronie grim slop ffmpeg w3m youtube-dl youtube-viewer newsboat wget curl gimp inkscape gcc make fontconfig pkg-config fakeroot lxappearance papirus-icon-theme alsa-utils pulseaudio imagemagick ntfs-3g unzip unrar gnome-themes-standard gtk-engine-murrine telegram-desktop qt5ct r udisks2 perl-term-readline-gnu transmission-cli python-pynvim python-pip calcurse acpi acpid gnupg noto-fonts-cjk powerline-fonts python-pygit2 polkit polkit-gnome zathura zathura-pdf-mupdf zathura-djvu gst-libav vifm blueman bluez acpilight powertop +pacman -Sy --noconfirm networkmanager network-manager-applet networkmanager-openvpn neovim sway swaylock swayidle waybar egl-wayland imv swaybg xorg-server-xwayland qt5-wayland wl-clipboard dbus tmux htop bemenu mupdf mpd ncmpcpp mpc mpv mplayer mako cronie grim slop ffmpeg w3m youtube-dl youtube-viewer newsboat wget curl gimp inkscape gcc make fontconfig pkg-config fakeroot lxappearance papirus-icon-theme alsa-utils pulseaudio imagemagick ntfs-3g unzip unrar gnome-themes-standard gtk-engine-murrine telegram-desktop qt5ct r udisks2 perl-term-readline-gnu transmission-cli python-pynvim python-pip calcurse acpi acpid gnupg noto-fonts-cjk powerline-fonts python-pygit2 polkit polkit-gnome zathura zathura-pdf-mupdf zathura-djvu gst-libav vifm blueman bluez acpilight powertop lightdm # Copy system config files cp system/sudoers /etc/ +cp system/mkinitcpio.conf /etc/ +cp -r system/loader/ /boot/loader/ +cp -r system/lightdm/ /etc/lightdm/ cp systemd/hotspot.service /etc/systemd/system/ cp systemd/startupsound.service /etc/systemd/system/ @@ -15,10 +18,11 @@ git clone https://aur.archlinux.org/yay.git cd yay makepkg -si -yay -S --noconfirm ttf-symbola stig pam-gnupg mutt-wizard-git ncmpamixer +yay -S --noconfirm ttf-symbola stig pam-gnupg mutt-wizard-git ncmpamixer lightdm-mini-greeter plymouth-git # Laptop pacman -S --noconfirm xf86-video-intel +systemctl enable lightdm systemctl enable NetworkManager systemctl start NetworkManager diff --git a/system/lightdm/lightdm-mini-greeter.conf b/system/lightdm/lightdm-mini-greeter.conf new file mode 100644 index 0000000..c99d2b7 --- /dev/null +++ b/system/lightdm/lightdm-mini-greeter.conf @@ -0,0 +1,58 @@ +# LightDM Mini Greeter Configuration +# +# To test your configuration out, run: lightdm --test-mode + +[greeter] +# The user to login as. +user = yaroslav +# Whether to show the password input's label. +show-password-label = true +# The text of the password input's label. +password-label-text = Password: +# Show a blinking cursor in the password input. +show-input-cursor = true + + +[greeter-hotkeys] +# The modifier key used to trigger hotkeys. Possible values are: +# "alt", "control" or "meta" +# meta is also known as the "Windows"/"Super" key +mod-key = meta +# Power management shortcuts (single-key, case-sensitive) +shutdown-key = s +restart-key = r +hibernate-key = h +suspend-key = u + + +[greeter-theme] +# A color from X11's `rgb.txt` file, a quoted hex string(`"#rrggbb"`) or a +# RGB color(`rgb(r,g,b)`) are all acceptable formats. + +# The font to use for all text +font = "monospace" +# The font size to use for all text +font-size = 1em +# The default text color +text-color = "#080800" +# The color of the error text +error-color = "#F8F8F0" +# An absolute path to an optional background image. +# The image will be displayed centered & unscaled. +background-image = "" +# The screen's background color. +background-color = "#111111" +# The password window's background color +window-color = "#cc241d" +# The color of the password window's border +border-color = "#080800" +# The width of the password window's border. +# A trailing `px` is required. +border-width = 2px +# The pixels of empty space around the password input. +# Do not include a trailing `px`. +layout-space = 15 +# The color of the text in the password input. +password-color = "#F8F8F0" +# The background color of the password input. +password-background-color = "#1B1D1E" diff --git a/system/lightdm/lightdm.conf b/system/lightdm/lightdm.conf new file mode 100644 index 0000000..7d8f205 --- /dev/null +++ b/system/lightdm/lightdm.conf @@ -0,0 +1,169 @@ +# +# General configuration +# +# start-default-seat = True to always start one seat if none are defined in the configuration +# greeter-user = User to run greeter as +# minimum-display-number = Minimum display number to use for X servers +# minimum-vt = First VT to run displays on +# lock-memory = True to prevent memory from being paged to disk +# user-authority-in-system-dir = True if session authority should be in the system location +# guest-account-script = Script to be run to setup guest account +# logind-check-graphical = True to on start seats that are marked as graphical by logind +# log-directory = Directory to log information to +# run-directory = Directory to put running state in +# cache-directory = Directory to cache to +# sessions-directory = Directory to find sessions +# remote-sessions-directory = Directory to find remote sessions +# greeters-directory = Directory to find greeters +# backup-logs = True to move add a .old suffix to old log files when opening new ones +# dbus-service = True if LightDM provides a D-Bus service to control it +# +[LightDM] +#start-default-seat=true +#greeter-user=lightdm +#minimum-display-number=0 +#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799 +#lock-memory=true +#user-authority-in-system-dir=false +#guest-account-script=guest-account +#logind-check-graphical=false +#log-directory=/var/log/lightdm +run-directory=/run/lightdm +#cache-directory=/var/cache/lightdm +#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions +#remote-sessions-directory=/usr/share/lightdm/remote-sessions +#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters +#backup-logs=true +#dbus-service=true + +# +# Seat configuration +# +# Seat configuration is matched against the seat name glob in the section, for example: +# [Seat:*] matches all seats and is applied first. +# [Seat:seat0] matches the seat named "seat0". +# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client". +# +# type = Seat type (local, xremote, unity) +# pam-service = PAM service to use for login +# pam-autologin-service = PAM service to use for autologin +# pam-greeter-service = PAM service to use for greeters +# xserver-backend = X backend to use (mir) +# xserver-command = X server command to run (can also contain arguments e.g. X -special-option) +# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option) +# xserver-config = Config file to pass to X server +# xserver-layout = Layout to pass to X server +# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server +# xserver-share = True if the X server is shared for both greeter and session +# xserver-hostname = Hostname of X server (only for type=xremote) +# xserver-display-number = Display number of X server (only for type=xremote) +# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true) +# xdmcp-port = XDMCP UDP/IP port to communicate on +# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf) +# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option) +# unity-compositor-timeout = Number of seconds to wait for compositor to start +# greeter-session = Session to load for greeter +# greeter-hide-users = True to hide the user list +# greeter-allow-guest = True if the greeter should show a guest login option +# greeter-show-manual-login = True if the greeter should offer a manual login option +# greeter-show-remote-login = True if the greeter should offer a remote login option +# user-session = Session to load for users +# allow-user-switching = True if allowed to switch users +# allow-guest = True if guest login is allowed +# guest-session = Session to load for guests (overrides user-session) +# session-wrapper = Wrapper script to run session with +# greeter-wrapper = Wrapper script to run greeter with +# guest-wrapper = Wrapper script to run guest sessions with +# display-setup-script = Script to run when starting a greeter session (runs as root) +# display-stopped-script = Script to run after stopping the display server (runs as root) +# greeter-setup-script = Script to run when starting a greeter (runs as root) +# session-setup-script = Script to run when starting a user session (runs as root) +# session-cleanup-script = Script to run when quitting a user session (runs as root) +# autologin-guest = True to log in as guest by default +# autologin-user = User to log in with by default (overrides autologin-guest) +# autologin-user-timeout = Number of seconds to wait before loading default user +# autologin-session = Session to load for automatic login (overrides user-session) +# autologin-in-background = True if autologin session should not be immediately activated +# exit-on-failure = True if the daemon should exit if this seat fails +# +[Seat:*] +#type=local +#pam-service=lightdm +#pam-autologin-service=lightdm-autologin +#pam-greeter-service=lightdm-greeter +#xserver-backend= +#xserver-command=X +#xmir-command=Xmir +#xserver-config= +#xserver-layout= +#xserver-allow-tcp=false +#xserver-share=true +#xserver-hostname= +#xserver-display-number= +#xdmcp-manager= +#xdmcp-port=177 +#xdmcp-key= +#unity-compositor-command=unity-system-compositor +#unity-compositor-timeout=60 +greeter-session=lightdm-mini-greeter +#greeter-hide-users=false +#greeter-allow-guest=true +#greeter-show-manual-login=false +#greeter-show-remote-login=true +user-session=sway +#allow-user-switching=true +#allow-guest=true +#guest-session= +session-wrapper=/etc/lightdm/Xsession +#greeter-wrapper= +#guest-wrapper= +#display-setup-script=/etc/lightdm/display_setup.sh +#display-stopped-script= +#greeter-setup-script= +#session-setup-script= +#session-cleanup-script= +#autologin-guest=false +#autologin-user= +#autologin-user-timeout=0 +#autologin-in-background=false +#autologin-session= +#exit-on-failure=false + +# +# XDMCP Server configuration +# +# enabled = True if XDMCP connections should be allowed +# port = UDP/IP port to listen for connections on +# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present) +# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf) +# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset) +# +# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively +# it can be a word and the first 7 characters are used as the key. +# +[XDMCPServer] +#enabled=false +#port=177 +#listen-address= +#key= +#hostname= + +# +# VNC Server configuration +# +# enabled = True if VNC connections should be allowed +# command = Command to run Xvnc server with +# port = TCP/IP port to listen for connections on +# listen-address = Host/address to listen for VNC connections (use all addresses if not present) +# width = Width of display to use +# height = Height of display to use +# depth = Color depth of display to use +# +[VNCServer] +#enabled=false +#command=Xvnc +#port=5900 +#listen-address= +#width=1024 +#height=768 +#depth=8 diff --git a/system/loader/entries/arch.conf b/system/loader/entries/arch.conf new file mode 100755 index 0000000..5d60a7a --- /dev/null +++ b/system/loader/entries/arch.conf @@ -0,0 +1,4 @@ +title Arch Linux +linux /vmlinuz-linux +initrd /initramfs-linux.img +options root=/dev/ArchVolGroup-root rw quiet splash loglevel=2 rd.udev.log_priority=3 rd.systemd.show_status=false vt.global_cursor_default=0 cryptdevice=/dev/nvme0n1p2:cryptlvm root=/dev/ArchVolGroup/root bluetooth.disable_ertm=1 diff --git a/system/loader/loader.conf b/system/loader/loader.conf new file mode 100755 index 0000000..a8c34e5 --- /dev/null +++ b/system/loader/loader.conf @@ -0,0 +1,3 @@ +#timeout 3 +#console-mode keep +default arch diff --git a/system/mkinitcpio.conf b/system/mkinitcpio.conf new file mode 100644 index 0000000..02dfa15 --- /dev/null +++ b/system/mkinitcpio.conf @@ -0,0 +1,66 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES=(piix ide_disk reiserfs) +MODULES=() + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run last, so it may be used to +# override the actual binaries included by a given hook +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES=() + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +FILES=() + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS=(base) +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS=(base udev autodetect block filesystems) +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS=(base udev block filesystems) +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS=(base udev block mdadm encrypt filesystems) +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS=(base udev block lvm2 filesystems) +# +## NOTE: If you have /usr on a separate partition, you MUST include the +# usr, fsck and shutdown hooks. +HOOKS=(base udev plymouth autodetect keyboard keymap modconf block plymouth-encrypt lvm2 filesystems fsck) + +# COMPRESSION +# Use this to compress the initramfs image. By default, gzip compression +# is used. Use 'cat' to create an uncompressed image. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +#COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" +#COMPRESSION="lz4" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS=() |