aboutsummaryrefslogtreecommitdiff
path: root/dotfiles/.config
diff options
context:
space:
mode:
Diffstat (limited to 'dotfiles/.config')
-rw-r--r--dotfiles/.config/kitty/kitty.conf1059
-rw-r--r--dotfiles/.config/mopidy/mopidy.conf123
-rw-r--r--dotfiles/.config/termite/config52
3 files changed, 0 insertions, 1234 deletions
diff --git a/dotfiles/.config/kitty/kitty.conf b/dotfiles/.config/kitty/kitty.conf
deleted file mode 100644
index 8c02f01..0000000
--- a/dotfiles/.config/kitty/kitty.conf
+++ /dev/null
@@ -1,1059 +0,0 @@
-# vim:fileencoding=utf-8:ft=conf:foldmethod=marker
-
-#: Fonts {{{
-
-#: kitty has very powerful font management. You can configure
-#: individual font faces and even specify special fonts for particular
-#: characters.
-
-font_family BlexMono Nerd Font Mono
-#font_family PxPlus IBM CGAthin
-# bold_font auto
-# italic_font auto
-# bold_italic_font auto
-
-#: You can specify different fonts for the bold/italic/bold-italic
-#: variants. To get a full list of supported fonts use the `kitty
-#: list-fonts` command. By default they are derived automatically, by
-#: the OSes font system. Setting them manually is useful for font
-#: families that have many weight variants like Book, Medium, Thick,
-#: etc. For example::
-
-#: font_family Operator Mono Book
-#: bold_font Operator Mono Medium
-#: italic_font Operator Mono Book Italic
-#: bold_italic_font Operator Mono Medium Italic
-
-font_size 10
-
-#: Font size (in pts)
-
-# adjust_line_height 0
-# adjust_column_width 0
-
-#: Change the size of each character cell kitty renders. You can use
-#: either numbers, which are interpreted as pixels or percentages
-#: (number followed by %), which are interpreted as percentages of the
-#: unmodified values. You can use negative pixels or percentages less
-#: than 100% to reduce sizes (but this might cause rendering
-#: artifacts).
-
-# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols
-
-#: Map the specified unicode codepoints to a particular font. Useful
-#: if you need special rendering for some symbols, such as for
-#: Powerline. Avoids the need for patched fonts. Each unicode code
-#: point is specified in the form U+<code point in hexadecimal>. You
-#: can specify multiple code points, separated by commas and ranges
-#: separated by hyphens. symbol_map itself can be specified multiple
-#: times. Syntax is::
-
-#: symbol_map codepoints Font Family Name
-
-# disable_ligatures never
-
-#: Choose how you want to handle multi-character ligatures. The
-#: default is to always render them. You can tell kitty to not render
-#: them when the cursor is over them by using cursor to make editing
-#: easier, or have kitty never render them at all by using always, if
-#: you don't like them. The ligature strategy can be set per-window
-#: either using the kitty remote control facility or by defining
-#: shortcuts for it in kitty.conf, for example::
-
-#: map alt+1 disable_ligatures_in active always
-#: map alt+2 disable_ligatures_in all never
-#: map alt+3 disable_ligatures_in tab cursor
-
-# box_drawing_scale 0.001, 1, 1.5, 2
-
-#: Change the sizes of the lines used for the box drawing unicode
-#: characters These values are in pts. They will be scaled by the
-#: monitor DPI to arrive at a pixel value. There must be four values
-#: corresponding to thin, normal, thick, and very thick lines.
-
-#: }}}
-
-#: Cursor customization {{{
-
-# cursor #cccccc
-
-#: Default cursor color
-
-# cursor_text_color #111111
-
-#: Choose the color of text under the cursor. If you want it rendered
-#: with the background color of the cell underneath instead, use the
-#: special keyword: background
-
-cursor_shape underline
-
-#: The cursor shape can be one of (block, beam, underline)
-
-# cursor_blink_interval -1
-
-#: The interval (in seconds) at which to blink the cursor. Set to zero
-#: to disable blinking. Negative values mean use system default. Note
-#: that numbers smaller than repaint_delay will be limited to
-#: repaint_delay.
-
-cursor_stop_blinking_after 0.0
-
-#: Stop blinking cursor after the specified number of seconds of
-#: keyboard inactivity. Set to zero to never stop blinking.
-
-#: }}}
-
-#: Scrollback {{{
-
-scrollback_lines 10000
-
-#: Number of lines of history to keep in memory for scrolling back.
-#: Memory is allocated on demand. Negative numbers are (effectively)
-#: infinite scrollback. Note that using very large scrollback is not
-#: recommended as it can slow down resizing of the terminal and also
-#: use large amounts of RAM.
-
-# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
-
-#: Program with which to view scrollback in a new window. The
-#: scrollback buffer is passed as STDIN to this program. If you change
-#: it, make sure the program you use can handle ANSI escape sequences
-#: for colors and text formatting. INPUT_LINE_NUMBER in the command
-#: line above will be replaced by an integer representing which line
-#: should be at the top of the screen.
-
-# scrollback_pager_history_size 0
-
-#: Separate scrollback history size, used only for browsing the
-#: scrollback buffer (in MB). This separate buffer is not available
-#: for interactive scrolling but will be piped to the pager program
-#: when viewing scrollback buffer in a separate window. The current
-#: implementation stores one character in 4 bytes, so approximatively
-#: 2500 lines per megabyte at 100 chars per line. A value of zero or
-#: less disables this feature. The maximum allowed size is 4GB.
-
-# wheel_scroll_multiplier 5.0
-
-#: Modify the amount scrolled by the mouse wheel. Note this is only
-#: used for low precision scrolling devices, not for high precision
-#: scrolling on platforms such as macOS and Wayland. Use negative
-#: numbers to change scroll direction.
-
-# touch_scroll_multiplier 1.0
-
-#: Modify the amount scrolled by a touchpad. Note this is only used
-#: for high precision scrolling devices on platforms such as macOS and
-#: Wayland. Use negative numbers to change scroll direction.
-
-#: }}}
-
-#: Mouse {{{
-
-mouse_hide_wait 1.0
-
-#: Hide mouse cursor after the specified number of seconds of the
-#: mouse not being used. Set to zero to disable mouse cursor hiding.
-#: Set to a negative value to hide the mouse cursor immediately when
-#: typing text.
-
-# url_color #0087bd
-url_style single
-
-#: The color and style for highlighting URLs on mouse-over. url_style
-#: can be one of: none, single, double, curly
-
-# open_url_modifiers kitty_mod
-
-#: The modifier keys to press when clicking with the mouse on URLs to
-#: open the URL
-
-# open_url_with default
-
-#: The program with which to open URLs that are clicked on. The
-#: special value default means to use the operating system's default
-#: URL handler.
-
-# copy_on_select no
-
-#: Copy to clipboard or a private buffer on select. With this set to
-#: clipboard, simply selecting text with the mouse will cause the text
-#: to be copied to clipboard. Useful on platforms such as macOS that
-#: do not have the concept of primary selections. You can instead
-#: specify a name such as a1 to copy to a private kitty buffer
-#: instead. Map a shortcut with the paste_from_buffer action to paste
-#: from this private buffer. For example::
-
-#: map cmd+shift+v paste_from_buffer a1
-
-#: Note that copying to the clipboard is a security risk, as all
-#: programs, including websites open in your browser can read the
-#: contents of the system clipboard.
-
-# strip_trailing_spaces never
-
-#: Remove spaces at the end of lines when copying to clipboard. A
-#: value of smart will do it when using normal selections, but not
-#: rectangle selections. always will always do it.
-
-# rectangle_select_modifiers ctrl+alt
-
-#: The modifiers to use rectangular selection (i.e. to select text in
-#: a rectangular block with the mouse)
-
-# terminal_select_modifiers shift
-
-#: The modifiers to override mouse selection even when a terminal
-#: application has grabbed the mouse
-
-# select_by_word_characters :@-./_~?&=%+#
-
-#: Characters considered part of a word when double clicking. In
-#: addition to these characters any character that is marked as an
-#: alphanumeric character in the unicode database will be matched.
-
-# click_interval -1.0
-
-#: The interval between successive clicks to detect double/triple
-#: clicks (in seconds). Negative numbers will use the system default
-#: instead, if available, or fallback to 0.5.
-
-# focus_follows_mouse no
-
-#: Set the active window to the window under the mouse when moving the
-#: mouse around
-
-# pointer_shape_when_grabbed arrow
-
-#: The shape of the mouse pointer when the program running in the
-#: terminal grabs the mouse.
-
-#: }}}
-
-#: Performance tuning {{{
-
-# repaint_delay 10
-
-#: Delay (in milliseconds) between screen updates. Decreasing it,
-#: increases frames-per-second (FPS) at the cost of more CPU usage.
-#: The default value yields ~100 FPS which is more than sufficient for
-#: most uses. Note that to actually achieve 100 FPS you have to either
-#: set sync_to_monitor to no or use a monitor with a high refresh
-#: rate. Also, to minimize latency when there is pending input to be
-#: processed, repaint_delay is ignored.
-
-# input_delay 3
-
-#: Delay (in milliseconds) before input from the program running in
-#: the terminal is processed. Note that decreasing it will increase
-#: responsiveness, but also increase CPU usage and might cause flicker
-#: in full screen programs that redraw the entire screen on each loop,
-#: because kitty is so fast that partial screen updates will be drawn.
-
-# sync_to_monitor yes
-
-#: Sync screen updates to the refresh rate of the monitor. This
-#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
-#: when scrolling. However, it limits the rendering speed to the
-#: refresh rate of your monitor. With a very high speed mouse/high
-#: keyboard repeat rate, you may notice some slight input latency. If
-#: so, set this to no.
-
-#: }}}
-
-#: Terminal bell {{{
-
-# enable_audio_bell yes
-
-#: Enable/disable the audio bell. Useful in environments that require
-#: silence.
-
-# visual_bell_duration 0.0
-
-#: Visual bell duration. Flash the screen when a bell occurs for the
-#: specified number of seconds. Set to zero to disable.
-
-# window_alert_on_bell yes
-
-#: Request window attention on bell. Makes the dock icon bounce on
-#: macOS or the taskbar flash on linux.
-
-# bell_on_tab yes
-
-#: Show a bell symbol on the tab if a bell occurs in one of the
-#: windows in the tab and the window is not the currently focused
-#: window
-
-# command_on_bell none
-
-#: Program to run when a bell occurs.
-
-#: }}}
-
-#: Window layout {{{
-
-remember_window_size no
-# initial_window_width 640
-# initial_window_height 400
-
-#: If enabled, the window size will be remembered so that new
-#: instances of kitty will have the same size as the previous
-#: instance. If disabled, the window will initially have size
-#: configured by initial_window_width/height, in pixels. You can use a
-#: suffix of "c" on the width/height values to have them interpreted
-#: as number of cells instead of pixels.
-
-# enabled_layouts *
-
-#: The enabled window layouts. A comma separated list of layout names.
-#: The special value all means all layouts. The first listed layout
-#: will be used as the startup layout. For a list of available
-#: layouts, see the
-#: https://sw.kovidgoyal.net/kitty/index.html#layouts.
-
-# window_resize_step_cells 2
-# window_resize_step_lines 2
-
-#: The step size (in units of cell width/cell height) to use when
-#: resizing windows. The cells value is used for horizontal resizing
-#: and the lines value for vertical resizing.
-
-# window_border_width 1.0
-
-#: The width (in pts) of window borders. Will be rounded to the
-#: nearest number of pixels based on screen resolution. Note that
-#: borders are displayed only when more than one window is visible.
-#: They are meant to separate multiple windows.
-
-# draw_minimal_borders yes
-
-#: Draw only the minimum borders needed. This means that only the
-#: minimum needed borders for inactive windows are drawn. That is only
-#: the borders that separate the inactive window from a neighbor. Note
-#: that setting a non-zero window margin overrides this and causes all
-#: borders to be drawn.
-
-# window_margin_width 0.0
-
-#: The window margin (in pts) (blank area outside the border)
-
-# single_window_margin_width -1000.0
-
-#: The window margin (in pts) to use when only a single window is
-#: visible. Negative values will cause the value of
-#: window_margin_width to be used instead.
-
-# window_padding_width 0.0
-
-#: The window padding (in pts) (blank area between the text and the
-#: window border)
-
-# placement_strategy center
-
-#: When the window size is not an exact multiple of the cell size, the
-#: cell area of the terminal window will have some extra padding on
-#: the sides. You can control how that padding is distributed with
-#: this option. Using a value of center means the cell area will be
-#: placed centrally. A value of top-left means the padding will be on
-#: only the bottom and right edges.
-
-# active_border_color #00ff00
-
-#: The color for the border of the active window. Set this to none to
-#: not draw borders around the active window.
-
-# inactive_border_color #cccccc
-
-#: The color for the border of inactive windows
-
-# bell_border_color #ff5a00
-
-#: The color for the border of inactive windows in which a bell has
-#: occurred
-
-# inactive_text_alpha 1.0
-
-#: Fade the text in inactive windows by the specified amount (a number
-#: between zero and one, with zero being fully faded).
-
-# hide_window_decorations no
-
-#: Hide the window decorations (title-bar and window borders). Whether
-#: this works and exactly what effect it has depends on the window
-#: manager/operating system.
-
-# resize_debounce_time 0.1
-
-#: The time (in seconds) to wait before redrawing the screen when a
-#: resize event is received. On platforms such as macOS, where the
-#: operating system sends events corresponding to the start and end of
-#: a resize, this number is ignored.
-
-# resize_draw_strategy static
-
-#: Choose how kitty draws a window while a resize is in progress. A
-#: value of static means draw the current window contents, mostly
-#: unchanged. A value of scale means draw the current window contents
-#: scaled. A value of blank means draw a blank window. A value of size
-#: means show the window size in cells.
-
-#: }}}
-
-#: Tab bar {{{
-
-# tab_bar_edge bottom
-
-#: Which edge to show the tab bar on, top or bottom
-
-# tab_bar_margin_width 0.0
-
-#: The margin to the left and right of the tab bar (in pts)
-
-tab_bar_style separator
-
-#: The tab bar style, can be one of: fade, separator or hidden. In the
-#: fade style, each tab's edges fade into the background color, in the
-#: separator style, tabs are separated by a configurable separator.
-
-# tab_bar_min_tabs 2
-
-#: The minimum number of tabs that must exist before the tab bar is
-#: shown
-
-# tab_switch_strategy previous
-
-#: The algorithm to use when switching to a tab when the current tab
-#: is closed. The default of previous will switch to the last used
-#: tab. A value of left will switch to the tab to the left of the
-#: closed tab. A value of last will switch to the right-most tab.
-
-# tab_fade 0.25 0.5 0.75 1
-
-#: Control how each tab fades into the background when using fade for
-#: the tab_bar_style. Each number is an alpha (between zero and one)
-#: that controls how much the corresponding cell fades into the
-#: background, with zero being no fade and one being full fade. You
-#: can change the number of cells used by adding/removing entries to
-#: this list.
-
-# tab_separator " ┇"
-
-#: The separator between tabs in the tab bar when using separator as
-#: the tab_bar_style.
-
-# tab_title_template {title}
-
-#: A template to render the tab title. The default just renders the
-#: title. If you wish to include the tab-index as well, use something
-#: like: {index}: {title}. Useful if you have shortcuts mapped for
-#: goto_tab N.
-
-# active_tab_foreground #000
-# active_tab_background #eee
-# active_tab_font_style bold-italic
-# inactive_tab_foreground #444
-# inactive_tab_background #999
-# inactive_tab_font_style normal
-
-#: Tab bar colors and styles
-
-#: }}}
-
-#: Color scheme {{{
-
-foreground #e5e9f0
-background #1b1e25
-
-#: The foreground and background colors
-
-background_opacity 1
-
-#: The opacity of the background. A number between 0 and 1, where 1 is
-#: opaque and 0 is fully transparent. This will only work if
-#: supported by the OS (for instance, when using a compositor under
-#: X11). Note that it only sets the default background color's
-#: opacity. This is so that things like the status bar in vim,
-#: powerline prompts, etc. still look good. But it means that if you
-#: use a color theme with a background color in your editor, it will
-#: not be rendered as transparent. Instead you should change the
-#: default background color in your kitty config and not use a
-#: background color in the editor color scheme. Or use the escape
-#: codes to set the terminals default colors in a shell script to
-#: launch your editor. Be aware that using a value less than 1.0 is a
-#: (possibly significant) performance hit. If you want to dynamically
-#: change transparency of windows set dynamic_background_opacity to
-#: yes (this is off by default as it has a performance cost)
-
-# dynamic_background_opacity no
-
-#: Allow changing of the background_opacity dynamically, using either
-#: keyboard shortcuts (increase_background_opacity and
-#: decrease_background_opacity) or the remote control facility.
-
-# dim_opacity 0.75
-
-#: How much to dim text that has the DIM/FAINT attribute set. One
-#: means no dimming and zero means fully dimmed (i.e. invisible).
-
-# selection_foreground #000000
-
-#: The foreground for text selected with the mouse. A value of none
-#: means to leave the color unchanged.
-
-# selection_background #fffacd
-
-#: The background for text selected with the mouse.
-
-
-#: The 16 terminal colors. There are 8 basic colors, each color has a
-#: dull and bright version. You can also set the remaining colors from
-#: the 256 color table as color16 to color255.
-
-color0 #1d2021
-color8 #665c54
-
-#: black
-
-color1 #b73030
-color9 #c45c5c
-
-#: red
-
-color2 #7ea95a
-color10 #9eba86
-
-#: green
-
-color3 #d99e26
-color11 #e2b55a
-
-#: yellow
-
-color4 #3f6e90
-color12 #81acc1
-
-#: blue
-
-color5 #9c6992
-color13 #b48ead
-
-#: magenta
-
-color6 #5b8277
-color14 #89b6a0
-
-#: cyan
-
-color7 #d8dee9
-color15 #fbf1c7
-
-#: white
-
-#: }}}
-
-#: Advanced {{{
-
-# shell .
-
-#: The shell program to execute. The default value of . means to use
-#: whatever shell is set as the default shell for the current user.
-#: Note that on macOS if you change this, you might need to add
-#: --login to ensure that the shell starts in interactive mode and
-#: reads its startup rc files.
-
-# editor .
-
-#: The console editor to use when editing the kitty config file or
-#: similar tasks. A value of . means to use the environment variable
-#: EDITOR. Note that this environment variable has to be set not just
-#: in your shell startup scripts but system-wide, otherwise kitty will
-#: not see it.
-
-# close_on_child_death no
-
-#: Close the window when the child process (shell) exits. If no (the
-#: default), the terminal will remain open when the child exits as
-#: long as there are still processes outputting to the terminal (for
-#: example disowned or backgrounded processes). If yes, the window
-#: will close as soon as the child process exits. Note that setting it
-#: to yes means that any background processes still using the terminal
-#: can fail silently because their stdout/stderr/stdin no longer work.
-
-# allow_remote_control no
-
-#: Allow other programs to control kitty. If you turn this on other
-#: programs can control all aspects of kitty, including sending text
-#: to kitty windows, opening new windows, closing windows, reading the
-#: content of windows, etc. Note that this even works over ssh
-#: connections.
-
-# env
-
-#: Specify environment variables to set in all child processes. Note
-#: that environment variables are expanded recursively, so if you
-#: use::
-
-#: env MYVAR1=a
-#: env MYVAR2=${MYVAR1}/${HOME}/b
-
-#: The value of MYVAR2 will be a/<path to home directory>/b.
-
-# update_check_interval 0.0
-
-#: Periodically check if an update to kitty is available. If an update
-#: is found a system notification is displayed informing you of the
-#: available update. The default is to check every 24 hrs, set to zero
-#: to disable.
-
-# startup_session none
-
-#: Path to a session file to use for all kitty instances. Can be
-#: overridden by using the kitty --session command line option for
-#: individual instances. See
-#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
-#: documentation for details. Note that relative paths are interpreted
-#: with respect to the kitty config directory. Environment variables
-#: in the path are expanded.
-
-# clipboard_control write-clipboard write-primary
-
-#: Allow programs running in kitty to read and write from the
-#: clipboard. You can control exactly which actions are allowed. The
-#: set of possible actions is: write-clipboard read-clipboard write-
-#: primary read-primary. You can additionally specify no-append to
-#: disable kitty's protocol extension for clipboard concatenation. The
-#: default is to allow writing to the clipboard and primary selection
-#: with concatenation enabled. Note that enabling the read
-#: functionality is a security risk as it means that any program, even
-#: one running on a remote server via SSH can read your clipboard.
-
-# term xterm-kitty
-
-#: The value of the TERM environment variable to set. Changing this
-#: can break many terminal programs, only change it if you know what
-#: you are doing, not because you read some advice on Stack Overflow
-#: to change it. The TERM variable is used by various programs to get
-#: information about the capabilities and behavior of the terminal. If
-#: you change it, depending on what programs you run, and how
-#: different the terminal you are changing it to is, various things
-#: from key-presses, to colors, to various advanced features may not
-#: work.
-
-#: }}}
-
-#: OS specific tweaks {{{
-
-# macos_titlebar_color system
-
-#: Change the color of the kitty window's titlebar on macOS. A value
-#: of system means to use the default system color, a value of
-#: background means to use the background color of the currently
-#: active window and finally you can use an arbitrary color, such as
-#: #12af59 or red. WARNING: This option works by using a hack, as
-#: there is no proper Cocoa API for it. It sets the background color
-#: of the entire window and makes the titlebar transparent. As such it
-#: is incompatible with background_opacity. If you want to use both,
-#: you are probably better off just hiding the titlebar with
-#: hide_window_decorations.
-
-# macos_option_as_alt no
-
-#: Use the option key as an alt key. With this set to no, kitty will
-#: use the macOS native Option+Key = unicode character behavior. This
-#: will break any Alt+key keyboard shortcuts in your terminal
-#: programs, but you can use the macOS unicode input technique. You
-#: can use the values: left, right, or both to use only the left,
-#: right or both Option keys as Alt, instead.
-
-# macos_hide_from_tasks no
-
-#: Hide the kitty window from running tasks (Option+Tab) on macOS.
-
-# macos_quit_when_last_window_closed no
-
-#: Have kitty quit when all the top-level windows are closed. By
-#: default, kitty will stay running, even with no open windows, as is
-#: the expected behavior on macOS.
-
-# macos_window_resizable yes
-
-#: Disable this if you want kitty top-level (OS) windows to not be
-#: resizable on macOS.
-
-# macos_thicken_font 0
-
-#: Draw an extra border around the font with the given width, to
-#: increase legibility at small font sizes. For example, a value of
-#: 0.75 will result in rendering that looks similar to sub-pixel
-#: antialiasing at common font sizes.
-
-# macos_traditional_fullscreen no
-
-#: Use the traditional full-screen transition, that is faster, but
-#: less pretty.
-
-# macos_show_window_title_in all
-
-#: Show or hide the window title in the macOS window or menu-bar. A
-#: value of window will show the title of the currently active window
-#: at the top of the macOS window. A value of menubar will show the
-#: title of the currently active window in the macOS menu-bar, making
-#: use of otherwise wasted space. all will show the title everywhere
-#: and none hides the title in the window and the menu-bar.
-
-# macos_custom_beam_cursor no
-
-#: Enable/disable custom mouse cursor for macOS that is easier to see
-#: on both light and dark backgrounds. WARNING: this might make your
-#: mouse cursor invisible on dual GPU machines.
-
-# linux_display_server auto
-
-#: Choose between Wayland and X11 backends. By default, an appropriate
-#: backend based on the system state is chosen automatically. Set it
-#: to x11 or wayland to force the choice.
-
-#: }}}
-
-#: Keyboard shortcuts {{{
-
-#: For a list of key names, see: GLFW keys
-#: <https://www.glfw.org/docs/latest/group__keys.html>. The name to
-#: use is the part after the GLFW_KEY_ prefix. For a list of modifier
-#: names, see: GLFW mods
-#: <https://www.glfw.org/docs/latest/group__mods.html>
-
-#: On Linux you can also use XKB key names to bind keys that are not
-#: supported by GLFW. See XKB keys
-#: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
-#: keysyms.h> for a list of key names. The name to use is the part
-#: after the XKB_KEY_ prefix. Note that you should only use an XKB key
-#: name for keys that are not present in the list of GLFW keys.
-
-#: Finally, you can use raw system key codes to map keys. To see the
-#: system key code for a key, start kitty with the kitty --debug-
-#: keyboard option. Then kitty will output some debug text for every
-#: key event. In that text look for ``native_code`` the value of that
-#: becomes the key name in the shortcut. For example:
-
-#: .. code-block:: none
-
-#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'
-
-#: Here, the key name for the A key is 0x61 and you can use it with::
-
-#: map ctrl+0x61 something
-
-#: to map ctrl+a to something.
-
-#: You can use the special action no_op to unmap a keyboard shortcut
-#: that is assigned in the default configuration::
-
-#: map kitty_mod+space no_op
-
-#: You can combine multiple actions to be triggered by a single
-#: shortcut, using the syntax below::
-
-#: map key combine <separator> action1 <separator> action2 <separator> action3 ...
-
-#: For example::
-
-#: map kitty_mod+e combine : new_window : next_layout
-
-#: this will create a new window and switch to the next available
-#: layout
-
-#: You can use multi-key shortcuts using the syntax shown below::
-
-#: map key1>key2>key3 action
-
-#: For example::
-
-#: map ctrl+f>2 set_font_size 20
-
-# kitty_mod ctrl+shift
-
-#: The value of kitty_mod is used as the modifier for all default
-#: shortcuts, you can change it in your kitty.conf to change the
-#: modifiers for all the default shortcuts.
-
-# clear_all_shortcuts no
-
-#: You can have kitty remove all shortcut definition seen up to this
-#: point. Useful, for instance, to remove the default shortcuts.
-
-# kitten_alias hints hints --hints-offset=0
-
-#: You can create aliases for kitten names, this allows overriding the
-#: defaults for kitten options and can also be used to shorten
-#: repeated mappings of the same kitten with a specific group of
-#: options. For example, the above alias changes the default value of
-#: kitty +kitten hints --hints-offset to zero for all mappings,
-#: including the builtin ones.
-
-#: Clipboard {{{
-
-# map kitty_mod+c copy_to_clipboard
-
-#: There is also a copy_or_interrupt action that can be optionally
-#: mapped to Ctrl+c. It will copy only if there is a selection and
-#: send an interrupt otherwise.
-
-# map kitty_mod+v paste_from_clipboard
-# map kitty_mod+s paste_from_selection
-# map shift+insert paste_from_selection
-# map kitty_mod+o pass_selection_to_program
-
-#: You can also pass the contents of the current selection to any
-#: program using pass_selection_to_program. By default, the system's
-#: open program is used, but you can specify your own, the selection
-#: will be passed as a command line argument to the program, for
-#: example::
-
-#: map kitty_mod+o pass_selection_to_program firefox
-
-#: You can pass the current selection to a terminal program running in
-#: a new kitty window, by using the @selection placeholder::
-
-#: map kitty_mod+y new_window less @selection
-
-#: }}}
-
-#: Scrolling {{{
-
-# map kitty_mod+up scroll_line_up
-# map kitty_mod+k scroll_line_up
-# map kitty_mod+down scroll_line_down
-# map kitty_mod+j scroll_line_down
-# map kitty_mod+page_up scroll_page_up
-# map kitty_mod+page_down scroll_page_down
-# map kitty_mod+home scroll_home
-# map kitty_mod+end scroll_end
-# map kitty_mod+h show_scrollback
-
-#: You can pipe the contents of the current screen + history buffer as
-#: STDIN to an arbitrary program using the ``pipe`` function. For
-#: example, the following opens the scrollback buffer in less in an
-#: overlay window::
-
-#: map f1 pipe @ansi overlay less +G -R
-
-#: For more details on piping screen and buffer contents to external
-#: programs, see pipe.
-
-#: }}}
-
-#: Window management {{{
-
-# map kitty_mod+enter new_window
-
-#: You can open a new window running an arbitrary program, for
-#: example::
-
-#: map kitty_mod+y new_window mutt
-
-#: You can open a new window with the current working directory set to
-#: the working directory of the current window using::
-
-#: map ctrl+alt+enter new_window_with_cwd
-
-#: You can open a new window that is allowed to control kitty via the
-#: kitty remote control facility by prefixing the command line with @.
-#: Any programs running in that window will be allowed to control
-#: kitty. For example::
-
-#: map ctrl+enter new_window @ some_program
-
-#: You can open a new window next to the currently active window or as
-#: the first window, with::
-
-#: map ctrl+n new_window !neighbor some_program
-#: map ctrl+f new_window !first some_program
-
-# map kitty_mod+n new_os_window
-
-#: Works like new_window above, except that it opens a top level OS
-#: kitty window. In particular you can use new_os_window_with_cwd to
-#: open a window with the current working directory.
-
-# map kitty_mod+w close_window
-# map kitty_mod+] next_window
-# map kitty_mod+[ previous_window
-# map kitty_mod+f move_window_forward
-# map kitty_mod+b move_window_backward
-# map kitty_mod+` move_window_to_top
-# map kitty_mod+r start_resizing_window
-# map kitty_mod+1 first_window
-# map kitty_mod+2 second_window
-# map kitty_mod+3 third_window
-# map kitty_mod+4 fourth_window
-# map kitty_mod+5 fifth_window
-# map kitty_mod+6 sixth_window
-# map kitty_mod+7 seventh_window
-# map kitty_mod+8 eighth_window
-# map kitty_mod+9 ninth_window
-# map kitty_mod+0 tenth_window
-#: }}}
-
-#: Tab management {{{
-
-# map kitty_mod+right next_tab
-# map kitty_mod+left previous_tab
-# map kitty_mod+t new_tab
-# map kitty_mod+q close_tab
-# map kitty_mod+. move_tab_forward
-# map kitty_mod+, move_tab_backward
-# map kitty_mod+alt+t set_tab_title
-
-#: You can also create shortcuts to go to specific tabs, with 1 being
-#: the first tab, 2 the second tab and -1 being the previously active
-#: tab::
-
-#: map ctrl+alt+1 goto_tab 1
-#: map ctrl+alt+2 goto_tab 2
-
-#: Just as with new_window above, you can also pass the name of
-#: arbitrary commands to run when using new_tab and use
-#: new_tab_with_cwd. Finally, if you want the new tab to open next to
-#: the current tab rather than at the end of the tabs list, use::
-
-#: map ctrl+t new_tab !neighbor [optional cmd to run]
-#: }}}
-
-#: Layout management {{{
-
-# map kitty_mod+l next_layout
-
-#: You can also create shortcuts to switch to specific layouts::
-
-#: map ctrl+alt+t goto_layout tall
-#: map ctrl+alt+s goto_layout stack
-
-#: Similarly, to switch back to the previous layout::
-
-#: map ctrl+alt+p last_used_layout
-#: }}}
-
-#: Font sizes {{{
-
-#: You can change the font size for all top-level kitty OS windows at
-#: a time or only the current one.
-
-# map kitty_mod+equal change_font_size all +2.0
-# map kitty_mod+minus change_font_size all -2.0
-# map kitty_mod+backspace change_font_size all 0
-
-#: To setup shortcuts for specific font sizes::
-
-#: map kitty_mod+f6 change_font_size all 10.0
-
-#: To setup shortcuts to change only the current OS window's font
-#: size::
-
-#: map kitty_mod+f6 change_font_size current 10.0
-#: }}}
-
-#: Select and act on visible text {{{
-
-#: Use the hints kitten to select text and either pass it to an
-#: external program or insert it into the terminal or copy it to the
-#: clipboard.
-
-# map kitty_mod+e kitten hints
-
-#: Open a currently visible URL using the keyboard. The program used
-#: to open the URL is specified in open_url_with.
-
-# map kitty_mod+p>f kitten hints --type path --program -
-
-#: Select a path/filename and insert it into the terminal. Useful, for
-#: instance to run git commands on a filename output from a previous
-#: git command.
-
-# map kitty_mod+p>shift+f kitten hints --type path
-
-#: Select a path/filename and open it with the default open program.
-
-# map kitty_mod+p>l kitten hints --type line --program -
-
-#: Select a line of text and insert it into the terminal. Use for the
-#: output of things like: ls -1
-
-# map kitty_mod+p>w kitten hints --type word --program -
-
-#: Select words and insert into terminal.
-
-# map kitty_mod+p>h kitten hints --type hash --program -
-
-#: Select something that looks like a hash and insert it into the
-#: terminal. Useful with git, which uses sha1 hashes to identify
-#: commits
-
-
-#: The hints kitten has many more modes of operation that you can map
-#: to different shortcuts. For a full description see kittens/hints.
-#: }}}
-
-#: Miscellaneous {{{
-
-# map kitty_mod+f11 toggle_fullscreen
-# map kitty_mod+f10 toggle_maximized
-# map kitty_mod+u kitten unicode_input
-# map kitty_mod+f2 edit_config_file
-# map kitty_mod+escape kitty_shell window
-
-#: Open the kitty shell in a new window/tab/overlay/os_window to
-#: control kitty using commands.
-
-# map kitty_mod+a>m set_background_opacity +0.1
-# map kitty_mod+a>l set_background_opacity -0.1
-# map kitty_mod+a>1 set_background_opacity 1
-# map kitty_mod+a>d set_background_opacity default
-# map kitty_mod+delete clear_terminal reset active
-
-#: You can create shortcuts to clear/reset the terminal. For example::
-
-#: # Reset the terminal
-#: map kitty_mod+f9 clear_terminal reset active
-#: # Clear the terminal screen by erasing all contents
-#: map kitty_mod+f10 clear_terminal clear active
-#: # Clear the terminal scrollback by erasing it
-#: map kitty_mod+f11 clear_terminal scrollback active
-#: # Scroll the contents of the screen into the scrollback
-#: map kitty_mod+f12 clear_terminal scroll active
-
-#: If you want to operate on all windows instead of just the current
-#: one, use all instead of active.
-
-#: It is also possible to remap Ctrl+L to both scroll the current
-#: screen contents into the scrollback buffer and clear the screen,
-#: instead of just clearing the screen::
-
-#: map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c
-
-
-#: You can tell kitty to send arbitrary (UTF-8) encoded text to the
-#: client program when pressing specified shortcut keys. For example::
-
-#: map ctrl+alt+a send_text all Special text
-
-#: This will send "Special text" when you press the ctrl+alt+a key
-#: combination. The text to be sent is a python string literal so you
-#: can use escapes like \x1b to send control codes or \u21fb to send
-#: unicode characters (or you can just input the unicode characters
-#: directly as UTF-8 text). The first argument to send_text is the
-#: keyboard modes in which to activate the shortcut. The possible
-#: values are normal or application or kitty or a comma separated
-#: combination of them. The special keyword all means all modes. The
-#: modes normal and application refer to the DECCKM cursor key mode
-#: for terminals, and kitty refers to the special kitty extended
-#: keyboard protocol.
-
-#: Another example, that outputs a word and then moves the cursor to
-#: the start of the line (same as pressing the Home key)::
-
-#: map ctrl+alt+a send_text normal Word\x1b[H
-#: map ctrl+alt+a send_text application Word\x1bOH
-
-#: }}}
-
-# }}}
diff --git a/dotfiles/.config/mopidy/mopidy.conf b/dotfiles/.config/mopidy/mopidy.conf
deleted file mode 100644
index e23e133..0000000
--- a/dotfiles/.config/mopidy/mopidy.conf
+++ /dev/null
@@ -1,123 +0,0 @@
-# For further information about options in this file see:
-# http://docs.mopidy.com/
-#
-# The initial commented out values reflect the defaults as of:
-# Mopidy 2.1.0
-# Mopidy-File 2.1.0
-# Mopidy-HTTP 2.1.0
-# Mopidy-Local 2.1.0
-# Mopidy-M3U 2.1.0
-# Mopidy-MPD 2.1.0
-# Mopidy-SoftwareMixer 2.1.0
-# Mopidy-Stream 2.1.0
-#
-# Available options and defaults might have changed since then,
-# run `mopidy config` to see the current effective config and
-# `mopidy --version` to check the current version.
-
-[core]
-#cache_dir = $XDG_CACHE_DIR/mopidy
-#config_dir = $XDG_CONFIG_DIR/mopidy
-#data_dir = $XDG_DATA_DIR/mopidy
-#max_tracklist_length = 10000
-#restore_state = false
-
-[logging]
-#color = true
-#console_format = %(levelname)-8s %(message)s
-#debug_format = %(levelname)-8s %(asctime)s [%(process)d:%(threadName)s] %(name)s\n %(message)s
-#debug_file = mopidy.log
-#config_file =
-
-[audio]
-#mixer = software
-#mixer_volume =
-#output = autoaudiosink
-#buffer_time =
-
-[proxy]
-#scheme =
-#hostname =
-#port =
-#username =
-#password =
-
-[mpd]
-#enabled = true
-hostname = 0.0.0.0
-#port = 6600
-#password =
-#max_connections = 20
-#connection_timeout = 60
-#zeroconf = Mopidy MPD server on $hostname
-#command_blacklist =
-# listall
-# listallinfo
-#default_playlist_scheme = m3u
-
-[http]
-#enabled = true
-#hostname = 127.0.0.1
-#port = 6680
-#static_dir =
-#zeroconf = Mopidy HTTP server on $hostname
-
-[stream]
-#enabled = true
-#protocols =
-# http
-# https
-# mms
-# rtmp
-# rtmps
-# rtsp
-#metadata_blacklist =
-#timeout = 5000
-
-[m3u]
-#enabled = true
-base_dir = ~/Music/
-#default_encoding = latin-1
-#default_extension = .m3u8
-#playlists_dir =
-
-[softwaremixer]
-#enabled = true
-
-[file]
-#enabled = true
-#media_dirs =
-# $XDG_MUSIC_DIR|Music
-# ~/|Home
-#excluded_file_extensions =
-# .jpg
-# .jpeg
-#show_dotfiles = false
-#follow_symlinks = false
-#metadata_timeout = 1000
-
-[local]
-#enabled = true
-#library = json
-media_dir = ~/Music/
-#scan_timeout = 1000
-#scan_flush_threshold = 100
-#scan_follow_symlinks = false
-#excluded_file_extensions =
-# .directory
-# .html
-# .jpeg
-# .jpg
-# .log
-# .nfo
-# .png
-# .txt
-
-[gmusic]
-enabled = true
-username = your@gmail.com
-password = yourpassword
-# deviceid = Your android's device id
-all_access = true
-bitrate = 320
-radio_stations_in_browse = true
diff --git a/dotfiles/.config/termite/config b/dotfiles/.config/termite/config
deleted file mode 100644
index fde7ad1..0000000
--- a/dotfiles/.config/termite/config
+++ /dev/null
@@ -1,52 +0,0 @@
-[colors]
-# Base16 Gruvbox dark, hard
-# Author = Dawid Kurek (dawikur@gmail.com), morhetz (https =//github.com/morhetz/gruvbox)
-
-foreground = #e5e9f0
-foreground_bold = #d8dee9
-cursor = #d8dee9
-cursor_foreground = #d8dee9
-background = #1b1e25
-# #1b1e25
-
-# 16 color space
-
-# Black, Gray, Silver, White
-color0 = #1d2021
-color8 = #434c5e
-color7 = #a1a6b2
-color15 = #e5e9f0
-
-# DarkRed + Red
-color1 = #b73030
-color9 = #c45c5c
-# DarkGreen + Green
-color2 = #7ea95a
-color10 = #9eba86
-# DarkYellow + Yellow
-color3 = #b2872f
-color11 = #e2b55a
-# DarkBlue + Blue
-color4 = #3f6e90
-color12 = #81acc1
-# DarkMagenta + Magenta
-color5 = #9c6992
-color13 = #b48ead
-# DarkCyan + Cyan
-color6 = #5b8277
-color14 = #7fac96
-
-# Extra colors
-color16 = #d08770
-color17 = #af5539
-color18 = #2d333f
-color19 = #3b4252
-color20 = #697792
-color21 = #d8dee9
-
-[options]
-font = BlexMono Nerd Font Mono 10
-allow_bold = true
-cursor_shape = underline
-mouse_autohide = true
-audible_bell = true