diff options
Diffstat (limited to 'dotfiles/.local/bin/git-prompt')
| -rwxr-xr-x | dotfiles/.local/bin/git-prompt | 484 |
1 files changed, 0 insertions, 484 deletions
diff --git a/dotfiles/.local/bin/git-prompt b/dotfiles/.local/bin/git-prompt deleted file mode 100755 index 048d2d7..0000000 --- a/dotfiles/.local/bin/git-prompt +++ /dev/null @@ -1,484 +0,0 @@ -# bash/zsh git prompt support -# -# Copyright (C) 2006,2007 Shawn O. Pearce <spearce@spearce.org> -# Distributed under the GNU General Public License, version 2.0. -# -# This script allows you to see repository status in your prompt. -# -# To enable: -# -# 1) Copy this file to somewhere (e.g. ~/.git-prompt.sh). -# 2) Add the following line to your .bashrc/.zshrc: -# source ~/.git-prompt.sh -# 3a) Change your PS1 to call __git_ps1 as -# command-substitution: -# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ ' -# ZSH: setopt PROMPT_SUBST ; PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ ' -# the optional argument will be used as format string. -# 3b) Alternatively, for a slightly faster prompt, __git_ps1 can -# be used for PROMPT_COMMAND in Bash or for precmd() in Zsh -# with two parameters, <pre> and <post>, which are strings -# you would put in $PS1 before and after the status string -# generated by the git-prompt machinery. e.g. -# Bash: PROMPT_COMMAND='__git_ps1 "\u@\h:\w" "\\\$ "' -# will show username, at-sign, host, colon, cwd, then -# various status string, followed by dollar and SP, as -# your prompt. -# ZSH: precmd () { __git_ps1 "%n" ":%~$ " "|%s" } -# will show username, pipe, then various status string, -# followed by colon, cwd, dollar and SP, as your prompt. -# Optionally, you can supply a third argument with a printf -# format string to finetune the output of the branch status -# -# The repository status will be displayed only if you are currently in a -# git repository. The %s token is the placeholder for the shown status. -# -# The prompt status always includes the current branch name. -# -# In addition, if you set GIT_PS1_SHOWDIRTYSTATE to a nonempty value, -# unstaged (*) and staged (+) changes will be shown next to the branch -# name. You can configure this per-repository with the -# bash.showDirtyState variable, which defaults to true once -# GIT_PS1_SHOWDIRTYSTATE is enabled. -# -# You can also see if currently something is stashed, by setting -# GIT_PS1_SHOWSTASHSTATE to a nonempty value. If something is stashed, -# then a '$' will be shown next to the branch name. -# -# If you would like to see if there're untracked files, then you can set -# GIT_PS1_SHOWUNTRACKEDFILES to a nonempty value. If there're untracked -# files, then a '%' will be shown next to the branch name. You can -# configure this per-repository with the bash.showUntrackedFiles -# variable, which defaults to true once GIT_PS1_SHOWUNTRACKEDFILES is -# enabled. -# -# If you would like to see the difference between HEAD and its upstream, -# set GIT_PS1_SHOWUPSTREAM="auto". A "<" indicates you are behind, ">" -# indicates you are ahead, "<>" indicates you have diverged and "=" -# indicates that there is no difference. You can further control -# behaviour by setting GIT_PS1_SHOWUPSTREAM to a space-separated list -# of values: -# -# verbose show number of commits ahead/behind (+/-) upstream -# name if verbose, then also show the upstream abbrev name -# legacy don't use the '--count' option available in recent -# versions of git-rev-list -# git always compare HEAD to @{upstream} -# svn always compare HEAD to your SVN upstream -# -# By default, __git_ps1 will compare HEAD to your SVN upstream if it can -# find one, or @{upstream} otherwise. Once you have set -# GIT_PS1_SHOWUPSTREAM, you can override it on a per-repository basis by -# setting the bash.showUpstream config variable. -# -# If you would like to see more information about the identity of -# commits checked out as a detached HEAD, set GIT_PS1_DESCRIBE_STYLE -# to one of these values: -# -# contains relative to newer annotated tag (v1.6.3.2~35) -# branch relative to newer tag or branch (master~4) -# describe relative to older annotated tag (v1.6.3.1-13-gdd42c2f) -# default exactly matching tag -# -# If you would like a colored hint about the current dirty state, set -# GIT_PS1_SHOWCOLORHINTS to a nonempty value. The colors are based on -# the colored output of "git status -sb" and are available only when -# using __git_ps1 for PROMPT_COMMAND or precmd. - -# check whether printf supports -v -__git_printf_supports_v= -printf -v __git_printf_supports_v -- '%s' yes >/dev/null 2>&1 - -# stores the divergence from upstream in $p -# used by GIT_PS1_SHOWUPSTREAM -__git_ps1_show_upstream () -{ - local key value - local svn_remote svn_url_pattern count n - local upstream=git legacy="" verbose="" name="" - - svn_remote=() - # get some config options from git-config - local output="$(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n ')" - while read -r key value; do - case "$key" in - bash.showupstream) - GIT_PS1_SHOWUPSTREAM="$value" - if [[ -z "${GIT_PS1_SHOWUPSTREAM}" ]]; then - p="" - return - fi - ;; - svn-remote.*.url) - svn_remote[$((${#svn_remote[@]} + 1))]="$value" - svn_url_pattern="$svn_url_pattern\\|$value" - upstream=svn+git # default upstream is SVN if available, else git - ;; - esac - done <<< "$output" - - # parse configuration values - for option in ${GIT_PS1_SHOWUPSTREAM}; do - case "$option" in - git|svn) upstream="$option" ;; - verbose) verbose=1 ;; - legacy) legacy=1 ;; - name) name=1 ;; - esac - done - - # Find our upstream - case "$upstream" in - git) upstream="@{upstream}" ;; - svn*) - # get the upstream from the "git-svn-id: ..." in a commit message - # (git-svn uses essentially the same procedure internally) - local -a svn_upstream - svn_upstream=($(git log --first-parent -1 \ - --grep="^git-svn-id: \(${svn_url_pattern#??}\)" 2>/dev/null)) - if [[ 0 -ne ${#svn_upstream[@]} ]]; then - svn_upstream=${svn_upstream[${#svn_upstream[@]} - 2]} - svn_upstream=${svn_upstream%@*} - local n_stop="${#svn_remote[@]}" - for ((n=1; n <= n_stop; n++)); do - svn_upstream=${svn_upstream#${svn_remote[$n]}} - done - - if [[ -z "$svn_upstream" ]]; then - # default branch name for checkouts with no layout: - upstream=${GIT_SVN_ID:-git-svn} - else - upstream=${svn_upstream#/} - fi - elif [[ "svn+git" = "$upstream" ]]; then - upstream="@{upstream}" - fi - ;; - esac - - # Find how many commits we are ahead/behind our upstream - if [[ -z "$legacy" ]]; then - count="$(git rev-list --count --left-right \ - "$upstream"...HEAD 2>/dev/null)" - else - # produce equivalent output to --count for older versions of git - local commits - if commits="$(git rev-list --left-right "$upstream"...HEAD 2>/dev/null)" - then - local commit behind=0 ahead=0 - for commit in $commits - do - case "$commit" in - "<"*) ((behind++)) ;; - *) ((ahead++)) ;; - esac - done - count="$behind $ahead" - else - count="" - fi - fi - - # calculate the result - if [[ -z "$verbose" ]]; then - case "$count" in - "") # no upstream - p="" ;; - "0 0") # equal to upstream - p="=" ;; - "0 "*) # ahead of upstream - p=">" ;; - *" 0") # behind upstream - p="<" ;; - *) # diverged from upstream - p="<>" ;; - esac - else - case "$count" in - "") # no upstream - p="" ;; - "0 0") # equal to upstream - p=" u=" ;; - "0 "*) # ahead of upstream - p=" u+${count#0 }" ;; - *" 0") # behind upstream - p=" u-${count% 0}" ;; - *) # diverged from upstream - p=" u+${count#* }-${count% *}" ;; - esac - if [[ -n "$count" && -n "$name" ]]; then - __git_ps1_upstream_name=$(git rev-parse \ - --abbrev-ref "$upstream" 2>/dev/null) - if [ $pcmode = yes ]; then - # see the comments around the - # __git_ps1_branch_name variable below - p="$p \${__git_ps1_upstream_name}" - else - p="$p ${__git_ps1_upstream_name}" - # not needed anymore; keep user's - # environment clean - unset __git_ps1_upstream_name - fi - fi - fi - -} - -# Helper function that is meant to be called from __git_ps1. It -# injects color codes into the appropriate gitstring variables used -# to build a gitstring. -__git_ps1_colorize_gitstring () -{ - if [[ -n ${ZSH_VERSION-} ]]; then - local c_red='%F{red}' - local c_green='%F{green}' - local c_lblue='%F{blue}' - local c_clear='%f' - else - # Using \[ and \] around colors is necessary to prevent - # issues with command line editing/browsing/completion! - local c_red='\[\e[31m\]' - local c_green='\[\e[32m\]' - local c_lblue='\[\e[1;34m\]' - local c_clear='\[\e[0m\]' - fi - local bad_color=$c_red - local ok_color=$c_green - local flags_color="$c_lblue" - - local branch_color="" - if [ $detached = no ]; then - branch_color="$ok_color" - else - branch_color="$bad_color" - fi - c="$branch_color$c" - - z="$c_clear$z" - if [ "$w" = "*" ]; then - w="$bad_color$w" - fi - if [ -n "$i" ]; then - i="$ok_color$i" - fi - if [ -n "$s" ]; then - s="$flags_color$s" - fi - if [ -n "$u" ]; then - u="$bad_color$u" - fi - r="$c_clear$r" -} - -# __git_ps1 accepts 0 or 1 arguments (i.e., format string) -# when called from PS1 using command substitution -# in this mode it prints text to add to bash PS1 prompt (includes branch name) -# -# __git_ps1 requires 2 or 3 arguments when called from PROMPT_COMMAND (pc) -# in that case it _sets_ PS1. The arguments are parts of a PS1 string. -# when two arguments are given, the first is prepended and the second appended -# to the state string when assigned to PS1. -# The optional third parameter will be used as printf format string to further -# customize the output of the git-status string. -# In this mode you can request colored hints using GIT_PS1_SHOWCOLORHINTS=true -__git_ps1 () -{ - local pcmode=no - local detached=no - local ps1pc_start='\u@\h:\w ' - local ps1pc_end='\$ ' - local printf_format=' %s ' - - case "$#" in - 2|3) pcmode=yes - ps1pc_start="$1" - ps1pc_end="$2" - printf_format="${3:-$printf_format}" - ;; - 0|1) printf_format="${1:-$printf_format}" - ;; - *) return - ;; - esac - - local repo_info rev_parse_exit_code - repo_info="$(git rev-parse --git-dir --is-inside-git-dir \ - --is-bare-repository --is-inside-work-tree \ - --short HEAD 2>/dev/null)" - rev_parse_exit_code="$?" - - if [ -z "$repo_info" ]; then - if [ $pcmode = yes ]; then - #In PC mode PS1 always needs to be set - PS1="$ps1pc_start$ps1pc_end" - fi - return - fi - - local short_sha - if [ "$rev_parse_exit_code" = "0" ]; then - short_sha="${repo_info##*$'\n'}" - repo_info="${repo_info%$'\n'*}" - fi - local inside_worktree="${repo_info##*$'\n'}" - repo_info="${repo_info%$'\n'*}" - local bare_repo="${repo_info##*$'\n'}" - repo_info="${repo_info%$'\n'*}" - local inside_gitdir="${repo_info##*$'\n'}" - local g="${repo_info%$'\n'*}" - - local r="" - local b="" - local step="" - local total="" - if [ -d "$g/rebase-merge" ]; then - read b 2>/dev/null <"$g/rebase-merge/head-name" - read step 2>/dev/null <"$g/rebase-merge/msgnum" - read total 2>/dev/null <"$g/rebase-merge/end" - if [ -f "$g/rebase-merge/interactive" ]; then - r="|REBASE-i" - else - r="|REBASE-m" - fi - else - if [ -d "$g/rebase-apply" ]; then - read step 2>/dev/null <"$g/rebase-apply/next" - read total 2>/dev/null <"$g/rebase-apply/last" - if [ -f "$g/rebase-apply/rebasing" ]; then - read b 2>/dev/null <"$g/rebase-apply/head-name" - r="|REBASE" - elif [ -f "$g/rebase-apply/applying" ]; then - r="|AM" - else - r="|AM/REBASE" - fi - elif [ -f "$g/MERGE_HEAD" ]; then - r="|MERGING" - elif [ -f "$g/CHERRY_PICK_HEAD" ]; then - r="|CHERRY-PICKING" - elif [ -f "$g/REVERT_HEAD" ]; then - r="|REVERTING" - elif [ -f "$g/BISECT_LOG" ]; then - r="|BISECTING" - fi - - if [ -n "$b" ]; then - : - elif [ -h "$g/HEAD" ]; then - # symlink symbolic ref - b="$(git symbolic-ref HEAD 2>/dev/null)" - else - local head="" - if ! read head 2>/dev/null <"$g/HEAD"; then - if [ $pcmode = yes ]; then - PS1="$ps1pc_start$ps1pc_end" - fi - return - fi - # is it a symbolic ref? - b="${head#ref: }" - if [ "$head" = "$b" ]; then - detached=yes - b="$( - case "${GIT_PS1_DESCRIBE_STYLE-}" in - (contains) - git describe --contains HEAD ;; - (branch) - git describe --contains --all HEAD ;; - (describe) - git describe HEAD ;; - (* | default) - git describe --tags --exact-match HEAD ;; - esac 2>/dev/null)" || - - b="$short_sha..." - b="($b)" - fi - fi - fi - - if [ -n "$step" ] && [ -n "$total" ]; then - r="$r $step/$total" - fi - - local w="" - local i="" - local s="" - local u="" - local c="" - local p="" - - if [ "true" = "$inside_gitdir" ]; then - if [ "true" = "$bare_repo" ]; then - c="BARE:" - else - b="GIT_DIR!" - fi - elif [ "true" = "$inside_worktree" ]; then - if [ -n "${GIT_PS1_SHOWDIRTYSTATE-}" ] && - [ "$(git config --bool bash.showDirtyState)" != "false" ] - then - git diff --no-ext-diff --quiet --exit-code || w="*" - if [ -n "$short_sha" ]; then - git diff-index --cached --quiet HEAD -- || i="+" - else - i="#" - fi - fi - if [ -n "${GIT_PS1_SHOWSTASHSTATE-}" ] && - [ -r "$g/refs/stash" ]; then - s="$" - fi - - if [ -n "${GIT_PS1_SHOWUNTRACKEDFILES-}" ] && - [ "$(git config --bool bash.showUntrackedFiles)" != "false" ] && - git ls-files --others --exclude-standard --error-unmatch -- '*' >/dev/null 2>/dev/null - then - u="%${ZSH_VERSION+%}" - fi - - if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then - __git_ps1_show_upstream - fi - fi - - local z="${GIT_PS1_STATESEPARATOR-" "}" - - # NO color option unless in PROMPT_COMMAND mode - if [ $pcmode = yes ] && [ -n "${GIT_PS1_SHOWCOLORHINTS-}" ]; then - __git_ps1_colorize_gitstring - fi - - b=${b##refs/heads/} - if [ $pcmode = yes ]; then - # In pcmode (and only pcmode) the contents of - # $gitstring are subject to expansion by the shell. - # Avoid putting the raw ref name in the prompt to - # protect the user from arbitrary code execution via - # specially crafted ref names (e.g., a ref named - # '$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)' would execute - # 'sudo rm -rf /' when the prompt is drawn). Instead, - # put the ref name in a new global variable (in the - # __git_ps1_* namespace to avoid colliding with the - # user's environment) and reference that variable from - # PS1. - __git_ps1_branch_name=$b - # note that the $ is escaped -- the variable will be - # expanded later (when it's time to draw the prompt) - b="\${__git_ps1_branch_name}" - fi - - local f="$w$i$s$u" - local gitstring="$c$b${f:+$z$f}$r$p" - - if [ $pcmode = yes ]; then - if [ "${__git_printf_supports_v-}" != yes ]; then - gitstring=$(printf -- "$printf_format" "$gitstring") - else - printf -v gitstring -- "$printf_format" "$gitstring" - fi - PS1="$ps1pc_start$gitstring$ps1pc_end" - else - printf -- "$printf_format" "$gitstring" - fi -} |