aboutsummaryrefslogtreecommitdiff
path: root/dotfiles/.local/bin
diff options
context:
space:
mode:
Diffstat (limited to 'dotfiles/.local/bin')
-rwxr-xr-xdotfiles/.local/bin/activenv3
-rwxr-xr-xdotfiles/.local/bin/camtoggle3
-rwxr-xr-xdotfiles/.local/bin/changeoutput18
-rwxr-xr-xdotfiles/.local/bin/ddquakemite16
-rwxr-xr-xdotfiles/.local/bin/ddtelegram12
-rwxr-xr-xdotfiles/.local/bin/ddvk12
-rwxr-xr-xdotfiles/.local/bin/doccompiler34
-rwxr-xr-xdotfiles/.local/bin/git-prompt484
-rwxr-xr-xdotfiles/.local/bin/i3barbattery34
-rwxr-xr-xdotfiles/.local/bin/i3barmusic18
-rwxr-xr-xdotfiles/.local/bin/i3barrecstatus8
-rwxr-xr-xdotfiles/.local/bin/i3barweather18
-rwxr-xr-xdotfiles/.local/bin/linkhandler22
-rwxr-xr-xdotfiles/.local/bin/listsinks3
-rwxr-xr-xdotfiles/.local/bin/lmc17
-rwxr-xr-xdotfiles/.local/bin/lock-color86
-rwxr-xr-xdotfiles/.local/bin/mailcheck35
-rwxr-xr-xdotfiles/.local/bin/mako_launch9
-rwxr-xr-xdotfiles/.local/bin/menublk106
-rwxr-xr-xdotfiles/.local/bin/menudisplay14
-rwxr-xr-xdotfiles/.local/bin/menuducksearch16
-rwxr-xr-xdotfiles/.local/bin/menuemoji16
-rwxr-xr-xdotfiles/.local/bin/menugrim33
-rwxr-xr-xdotfiles/.local/bin/menumako6
-rwxr-xr-xdotfiles/.local/bin/menuoutput13
-rwxr-xr-xdotfiles/.local/bin/menuprompt7
-rwxr-xr-xdotfiles/.local/bin/menurun8
-rwxr-xr-xdotfiles/.local/bin/menusession8
-rwxr-xr-xdotfiles/.local/bin/menuxrun7
-rwxr-xr-xdotfiles/.local/bin/mopidy_launch4
-rwxr-xr-xdotfiles/.local/bin/notistats10
-rwxr-xr-xdotfiles/.local/bin/paccheck10
-rwxr-xr-xdotfiles/.local/bin/qmi_setup104
-rwxr-xr-xdotfiles/.local/bin/setbg3
-rwxr-xr-xdotfiles/.local/bin/setbglblur8
-rwxr-xr-xdotfiles/.local/bin/setbglsimple7
-rwxr-xr-xdotfiles/.local/bin/swaygetcurrentwindow5
-rwxr-xr-xdotfiles/.local/bin/swaykbd20
-rwxr-xr-xdotfiles/.local/bin/swayrecord14
-rwxr-xr-xdotfiles/.local/bin/swayresize27
-rwxr-xr-xdotfiles/.local/bin/swaysession35
-rwxr-xr-xdotfiles/.local/bin/swaystart12
-rwxr-xr-xdotfiles/.local/bin/sxiv-rifle48
-rwxr-xr-xdotfiles/.local/bin/texclear13
-rwxr-xr-xdotfiles/.local/bin/tlauncher3
-rwxr-xr-xdotfiles/.local/bin/vifm_launch15
-rwxr-xr-xdotfiles/.local/bin/waybar_launch9
-rwxr-xr-xdotfiles/.local/bin/xway11
48 files changed, 1424 insertions, 0 deletions
diff --git a/dotfiles/.local/bin/activenv b/dotfiles/.local/bin/activenv
new file mode 100755
index 0000000..6ffac10
--- /dev/null
+++ b/dotfiles/.local/bin/activenv
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+source ~/Documents/venvs/$1/bin/activate
diff --git a/dotfiles/.local/bin/camtoggle b/dotfiles/.local/bin/camtoggle
new file mode 100755
index 0000000..ba8b0d3
--- /dev/null
+++ b/dotfiles/.local/bin/camtoggle
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+pkill -f /dev/video || mpv --gpu-context=wayland --no-osc --no-input-default-bindings --input-conf=/dev/null --geometry=-0-0 --autofit=30% --title="mpvfloat" /dev/video2
diff --git a/dotfiles/.local/bin/changeoutput b/dotfiles/.local/bin/changeoutput
new file mode 100755
index 0000000..eab2cf9
--- /dev/null
+++ b/dotfiles/.local/bin/changeoutput
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+if [ -z "$1" ]; then
+ echo "Usage: $0 <sinkId/sinkName>" >&2
+ echo "Valid sinks:" >&2
+ pactl list short sinks >&2
+ exit 1
+fi
+
+newSink="$1"
+
+pactl list short sink-inputs|while read stream; do
+ streamId=$(echo $stream|cut '-d ' -f1)
+ echo "moving stream $streamId"
+ pactl move-sink-input "$streamId" "$newSink"
+done
+
+pactl set-default-sink $newSink
diff --git a/dotfiles/.local/bin/ddquakemite b/dotfiles/.local/bin/ddquakemite
new file mode 100755
index 0000000..ef67955
--- /dev/null
+++ b/dotfiles/.local/bin/ddquakemite
@@ -0,0 +1,16 @@
+#!/bin/bash
+
+if ! [ -z "$(swaymsg -t get_tree | grep 'quakemite')" ]; then
+ if [ -z "$(swaymsg -t get_tree | grep -A 42 'quakemite' | tail -n 1 | grep 'true')" ]; then
+ swaymsg '[title="quakemite"] scratchpad show'
+ else
+ swaymsg '[title="quakemite"] move scratchpad'
+ fi
+else
+ $TERMINAL -t "quakemite" -e "$SHELL -c 'TERM=xterm-256color; TERMINAL=termite; tmux a || tmux'" &
+ sleep 0.2s
+ currenty=$(swaygetcurrentwindow | cut -d ' ' -f1 | cut -d ',' -f2 )
+ let moveup=$currenty-25
+ swaymsg move up "$moveup px"
+fi
+
diff --git a/dotfiles/.local/bin/ddtelegram b/dotfiles/.local/bin/ddtelegram
new file mode 100755
index 0000000..8ddff22
--- /dev/null
+++ b/dotfiles/.local/bin/ddtelegram
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if pidof telegram-desktop > /dev/null; then
+ if [ -z $(swaymsg -t get_tree | grep -A 1 'telegramdesktop' | tail -n 1 | grep 'true') ]; then
+ swaymsg '[app_id="telegramdesktop"] scratchpad show'
+ else
+ swaymsg '[app_id="telegramdesktop"] move scratchpad'
+ fi
+else
+ telegram-desktop
+fi
+
diff --git a/dotfiles/.local/bin/ddvk b/dotfiles/.local/bin/ddvk
new file mode 100755
index 0000000..dedd2c9
--- /dev/null
+++ b/dotfiles/.local/bin/ddvk
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+if pidof vk > /dev/null; then
+ if [ -z $(swaymsg -t get_tree | grep -B 5 'vk' | head -n 1 | grep 'true') ]; then
+ swaymsg '[instance="vk"] scratchpad show'
+ else
+ swaymsg '[instance="vk"] move scratchpad'
+ fi
+else
+ xway vk-messenger
+fi
+
diff --git a/dotfiles/.local/bin/doccompiler b/dotfiles/.local/bin/doccompiler
new file mode 100755
index 0000000..b95d7a3
--- /dev/null
+++ b/dotfiles/.local/bin/doccompiler
@@ -0,0 +1,34 @@
+#!/bin/sh
+
+# Script to compile some documents to their final output (.tex, .md, .rmd, etc.)
+# Taken from one of Luke Smith's scripts, except this one focuses solely on
+# document compilation and doesn't compile any scripts or programs.
+
+file=$(readlink -f "$1")
+dir=$(dirname "$file")
+base="${file%.*}"
+
+cd "$dir" || exit
+
+textype() { \
+ command="pdflatex -interaction=nonstopmode"
+ ( sed 5q "$file" | grep -i -q 'xelatex' ) && command="xelatex"
+ $command --output-directory="$dir" "$base" &&
+ grep -i addbibresource "$file" >/dev/null &&
+ biber --input-directory "$dir" "$base" &&
+ $command --output-directory="$dir" "$base" &&
+ $command --output-directory="$dir" "$base"
+ }
+
+case "$file" in
+ *\.ms) refer -PS -e "$file" | groff -me -ms -kept -T pdf > "$base".pdf ;;
+ *\.mom) refer -PS -e "$file" | groff -mom -kept -T pdf > "$base".pdf ;;
+ *\.[0-9]) refer -PS -e "$file" | groff -mandoc -T pdf > "$base".pdf ;;
+ *\.rmd) echo "require(rmarkdown); rmarkdown::render('$file', quiet=TRUE)" | R -q --vanilla ;;
+ *\.tex) textype "$file" ;;
+ *\.md) pandoc "$file" --pdf-engine=xelatex -o "$base".pdf ;;
+ *\.sent) setsid sent "$file" 2>/dev/null & ;;
+ *) echo "Couldn't figure out file type!" && exit 1 ;;
+esac
+
+echo "Compiled successfully"
diff --git a/dotfiles/.local/bin/git-prompt b/dotfiles/.local/bin/git-prompt
new file mode 100755
index 0000000..048d2d7
--- /dev/null
+++ b/dotfiles/.local/bin/git-prompt
@@ -0,0 +1,484 @@
+# bash/zsh git prompt support
+#
+# Copyright (C) 2006,2007 Shawn O. Pearce <spearce@spearce.org>
+# Distributed under the GNU General Public License, version 2.0.
+#
+# This script allows you to see repository status in your prompt.
+#
+# To enable:
+#
+# 1) Copy this file to somewhere (e.g. ~/.git-prompt.sh).
+# 2) Add the following line to your .bashrc/.zshrc:
+# source ~/.git-prompt.sh
+# 3a) Change your PS1 to call __git_ps1 as
+# command-substitution:
+# Bash: PS1='[\u@\h \W$(__git_ps1 " (%s)")]\$ '
+# ZSH: setopt PROMPT_SUBST ; PS1='[%n@%m %c$(__git_ps1 " (%s)")]\$ '
+# the optional argument will be used as format string.
+# 3b) Alternatively, for a slightly faster prompt, __git_ps1 can
+# be used for PROMPT_COMMAND in Bash or for precmd() in Zsh
+# with two parameters, <pre> and <post>, which are strings
+# you would put in $PS1 before and after the status string
+# generated by the git-prompt machinery. e.g.
+# Bash: PROMPT_COMMAND='__git_ps1 "\u@\h:\w" "\\\$ "'
+# will show username, at-sign, host, colon, cwd, then
+# various status string, followed by dollar and SP, as
+# your prompt.
+# ZSH: precmd () { __git_ps1 "%n" ":%~$ " "|%s" }
+# will show username, pipe, then various status string,
+# followed by colon, cwd, dollar and SP, as your prompt.
+# Optionally, you can supply a third argument with a printf
+# format string to finetune the output of the branch status
+#
+# The repository status will be displayed only if you are currently in a
+# git repository. The %s token is the placeholder for the shown status.
+#
+# The prompt status always includes the current branch name.
+#
+# In addition, if you set GIT_PS1_SHOWDIRTYSTATE to a nonempty value,
+# unstaged (*) and staged (+) changes will be shown next to the branch
+# name. You can configure this per-repository with the
+# bash.showDirtyState variable, which defaults to true once
+# GIT_PS1_SHOWDIRTYSTATE is enabled.
+#
+# You can also see if currently something is stashed, by setting
+# GIT_PS1_SHOWSTASHSTATE to a nonempty value. If something is stashed,
+# then a '$' will be shown next to the branch name.
+#
+# If you would like to see if there're untracked files, then you can set
+# GIT_PS1_SHOWUNTRACKEDFILES to a nonempty value. If there're untracked
+# files, then a '%' will be shown next to the branch name. You can
+# configure this per-repository with the bash.showUntrackedFiles
+# variable, which defaults to true once GIT_PS1_SHOWUNTRACKEDFILES is
+# enabled.
+#
+# If you would like to see the difference between HEAD and its upstream,
+# set GIT_PS1_SHOWUPSTREAM="auto". A "<" indicates you are behind, ">"
+# indicates you are ahead, "<>" indicates you have diverged and "="
+# indicates that there is no difference. You can further control
+# behaviour by setting GIT_PS1_SHOWUPSTREAM to a space-separated list
+# of values:
+#
+# verbose show number of commits ahead/behind (+/-) upstream
+# name if verbose, then also show the upstream abbrev name
+# legacy don't use the '--count' option available in recent
+# versions of git-rev-list
+# git always compare HEAD to @{upstream}
+# svn always compare HEAD to your SVN upstream
+#
+# By default, __git_ps1 will compare HEAD to your SVN upstream if it can
+# find one, or @{upstream} otherwise. Once you have set
+# GIT_PS1_SHOWUPSTREAM, you can override it on a per-repository basis by
+# setting the bash.showUpstream config variable.
+#
+# If you would like to see more information about the identity of
+# commits checked out as a detached HEAD, set GIT_PS1_DESCRIBE_STYLE
+# to one of these values:
+#
+# contains relative to newer annotated tag (v1.6.3.2~35)
+# branch relative to newer tag or branch (master~4)
+# describe relative to older annotated tag (v1.6.3.1-13-gdd42c2f)
+# default exactly matching tag
+#
+# If you would like a colored hint about the current dirty state, set
+# GIT_PS1_SHOWCOLORHINTS to a nonempty value. The colors are based on
+# the colored output of "git status -sb" and are available only when
+# using __git_ps1 for PROMPT_COMMAND or precmd.
+
+# check whether printf supports -v
+__git_printf_supports_v=
+printf -v __git_printf_supports_v -- '%s' yes >/dev/null 2>&1
+
+# stores the divergence from upstream in $p
+# used by GIT_PS1_SHOWUPSTREAM
+__git_ps1_show_upstream ()
+{
+ local key value
+ local svn_remote svn_url_pattern count n
+ local upstream=git legacy="" verbose="" name=""
+
+ svn_remote=()
+ # get some config options from git-config
+ local output="$(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n ')"
+ while read -r key value; do
+ case "$key" in
+ bash.showupstream)
+ GIT_PS1_SHOWUPSTREAM="$value"
+ if [[ -z "${GIT_PS1_SHOWUPSTREAM}" ]]; then
+ p=""
+ return
+ fi
+ ;;
+ svn-remote.*.url)
+ svn_remote[$((${#svn_remote[@]} + 1))]="$value"
+ svn_url_pattern="$svn_url_pattern\\|$value"
+ upstream=svn+git # default upstream is SVN if available, else git
+ ;;
+ esac
+ done <<< "$output"
+
+ # parse configuration values
+ for option in ${GIT_PS1_SHOWUPSTREAM}; do
+ case "$option" in
+ git|svn) upstream="$option" ;;
+ verbose) verbose=1 ;;
+ legacy) legacy=1 ;;
+ name) name=1 ;;
+ esac
+ done
+
+ # Find our upstream
+ case "$upstream" in
+ git) upstream="@{upstream}" ;;
+ svn*)
+ # get the upstream from the "git-svn-id: ..." in a commit message
+ # (git-svn uses essentially the same procedure internally)
+ local -a svn_upstream
+ svn_upstream=($(git log --first-parent -1 \
+ --grep="^git-svn-id: \(${svn_url_pattern#??}\)" 2>/dev/null))
+ if [[ 0 -ne ${#svn_upstream[@]} ]]; then
+ svn_upstream=${svn_upstream[${#svn_upstream[@]} - 2]}
+ svn_upstream=${svn_upstream%@*}
+ local n_stop="${#svn_remote[@]}"
+ for ((n=1; n <= n_stop; n++)); do
+ svn_upstream=${svn_upstream#${svn_remote[$n]}}
+ done
+
+ if [[ -z "$svn_upstream" ]]; then
+ # default branch name for checkouts with no layout:
+ upstream=${GIT_SVN_ID:-git-svn}
+ else
+ upstream=${svn_upstream#/}
+ fi
+ elif [[ "svn+git" = "$upstream" ]]; then
+ upstream="@{upstream}"
+ fi
+ ;;
+ esac
+
+ # Find how many commits we are ahead/behind our upstream
+ if [[ -z "$legacy" ]]; then
+ count="$(git rev-list --count --left-right \
+ "$upstream"...HEAD 2>/dev/null)"
+ else
+ # produce equivalent output to --count for older versions of git
+ local commits
+ if commits="$(git rev-list --left-right "$upstream"...HEAD 2>/dev/null)"
+ then
+ local commit behind=0 ahead=0
+ for commit in $commits
+ do
+ case "$commit" in
+ "<"*) ((behind++)) ;;
+ *) ((ahead++)) ;;
+ esac
+ done
+ count="$behind $ahead"
+ else
+ count=""
+ fi
+ fi
+
+ # calculate the result
+ if [[ -z "$verbose" ]]; then
+ case "$count" in
+ "") # no upstream
+ p="" ;;
+ "0 0") # equal to upstream
+ p="=" ;;
+ "0 "*) # ahead of upstream
+ p=">" ;;
+ *" 0") # behind upstream
+ p="<" ;;
+ *) # diverged from upstream
+ p="<>" ;;
+ esac
+ else
+ case "$count" in
+ "") # no upstream
+ p="" ;;
+ "0 0") # equal to upstream
+ p=" u=" ;;
+ "0 "*) # ahead of upstream
+ p=" u+${count#0 }" ;;
+ *" 0") # behind upstream
+ p=" u-${count% 0}" ;;
+ *) # diverged from upstream
+ p=" u+${count#* }-${count% *}" ;;
+ esac
+ if [[ -n "$count" && -n "$name" ]]; then
+ __git_ps1_upstream_name=$(git rev-parse \
+ --abbrev-ref "$upstream" 2>/dev/null)
+ if [ $pcmode = yes ]; then
+ # see the comments around the
+ # __git_ps1_branch_name variable below
+ p="$p \${__git_ps1_upstream_name}"
+ else
+ p="$p ${__git_ps1_upstream_name}"
+ # not needed anymore; keep user's
+ # environment clean
+ unset __git_ps1_upstream_name
+ fi
+ fi
+ fi
+
+}
+
+# Helper function that is meant to be called from __git_ps1. It
+# injects color codes into the appropriate gitstring variables used
+# to build a gitstring.
+__git_ps1_colorize_gitstring ()
+{
+ if [[ -n ${ZSH_VERSION-} ]]; then
+ local c_red='%F{red}'
+ local c_green='%F{green}'
+ local c_lblue='%F{blue}'
+ local c_clear='%f'
+ else
+ # Using \[ and \] around colors is necessary to prevent
+ # issues with command line editing/browsing/completion!
+ local c_red='\[\e[31m\]'
+ local c_green='\[\e[32m\]'
+ local c_lblue='\[\e[1;34m\]'
+ local c_clear='\[\e[0m\]'
+ fi
+ local bad_color=$c_red
+ local ok_color=$c_green
+ local flags_color="$c_lblue"
+
+ local branch_color=""
+ if [ $detached = no ]; then
+ branch_color="$ok_color"
+ else
+ branch_color="$bad_color"
+ fi
+ c="$branch_color$c"
+
+ z="$c_clear$z"
+ if [ "$w" = "*" ]; then
+ w="$bad_color$w"
+ fi
+ if [ -n "$i" ]; then
+ i="$ok_color$i"
+ fi
+ if [ -n "$s" ]; then
+ s="$flags_color$s"
+ fi
+ if [ -n "$u" ]; then
+ u="$bad_color$u"
+ fi
+ r="$c_clear$r"
+}
+
+# __git_ps1 accepts 0 or 1 arguments (i.e., format string)
+# when called from PS1 using command substitution
+# in this mode it prints text to add to bash PS1 prompt (includes branch name)
+#
+# __git_ps1 requires 2 or 3 arguments when called from PROMPT_COMMAND (pc)
+# in that case it _sets_ PS1. The arguments are parts of a PS1 string.
+# when two arguments are given, the first is prepended and the second appended
+# to the state string when assigned to PS1.
+# The optional third parameter will be used as printf format string to further
+# customize the output of the git-status string.
+# In this mode you can request colored hints using GIT_PS1_SHOWCOLORHINTS=true
+__git_ps1 ()
+{
+ local pcmode=no
+ local detached=no
+ local ps1pc_start='\u@\h:\w '
+ local ps1pc_end='\$ '
+ local printf_format=' %s '
+
+ case "$#" in
+ 2|3) pcmode=yes
+ ps1pc_start="$1"
+ ps1pc_end="$2"
+ printf_format="${3:-$printf_format}"
+ ;;
+ 0|1) printf_format="${1:-$printf_format}"
+ ;;
+ *) return
+ ;;
+ esac
+
+ local repo_info rev_parse_exit_code
+ repo_info="$(git rev-parse --git-dir --is-inside-git-dir \
+ --is-bare-repository --is-inside-work-tree \
+ --short HEAD 2>/dev/null)"
+ rev_parse_exit_code="$?"
+
+ if [ -z "$repo_info" ]; then
+ if [ $pcmode = yes ]; then
+ #In PC mode PS1 always needs to be set
+ PS1="$ps1pc_start$ps1pc_end"
+ fi
+ return
+ fi
+
+ local short_sha
+ if [ "$rev_parse_exit_code" = "0" ]; then
+ short_sha="${repo_info##*$'\n'}"
+ repo_info="${repo_info%$'\n'*}"
+ fi
+ local inside_worktree="${repo_info##*$'\n'}"
+ repo_info="${repo_info%$'\n'*}"
+ local bare_repo="${repo_info##*$'\n'}"
+ repo_info="${repo_info%$'\n'*}"
+ local inside_gitdir="${repo_info##*$'\n'}"
+ local g="${repo_info%$'\n'*}"
+
+ local r=""
+ local b=""
+ local step=""
+ local total=""
+ if [ -d "$g/rebase-merge" ]; then
+ read b 2>/dev/null <"$g/rebase-merge/head-name"
+ read step 2>/dev/null <"$g/rebase-merge/msgnum"
+ read total 2>/dev/null <"$g/rebase-merge/end"
+ if [ -f "$g/rebase-merge/interactive" ]; then
+ r="|REBASE-i"
+ else
+ r="|REBASE-m"
+ fi
+ else
+ if [ -d "$g/rebase-apply" ]; then
+ read step 2>/dev/null <"$g/rebase-apply/next"
+ read total 2>/dev/null <"$g/rebase-apply/last"
+ if [ -f "$g/rebase-apply/rebasing" ]; then
+ read b 2>/dev/null <"$g/rebase-apply/head-name"
+ r="|REBASE"
+ elif [ -f "$g/rebase-apply/applying" ]; then
+ r="|AM"
+ else
+ r="|AM/REBASE"
+ fi
+ elif [ -f "$g/MERGE_HEAD" ]; then
+ r="|MERGING"
+ elif [ -f "$g/CHERRY_PICK_HEAD" ]; then
+ r="|CHERRY-PICKING"
+ elif [ -f "$g/REVERT_HEAD" ]; then
+ r="|REVERTING"
+ elif [ -f "$g/BISECT_LOG" ]; then
+ r="|BISECTING"
+ fi
+
+ if [ -n "$b" ]; then
+ :
+ elif [ -h "$g/HEAD" ]; then
+ # symlink symbolic ref
+ b="$(git symbolic-ref HEAD 2>/dev/null)"
+ else
+ local head=""
+ if ! read head 2>/dev/null <"$g/HEAD"; then
+ if [ $pcmode = yes ]; then
+ PS1="$ps1pc_start$ps1pc_end"
+ fi
+ return
+ fi
+ # is it a symbolic ref?
+ b="${head#ref: }"
+ if [ "$head" = "$b" ]; then
+ detached=yes
+ b="$(
+ case "${GIT_PS1_DESCRIBE_STYLE-}" in
+ (contains)
+ git describe --contains HEAD ;;
+ (branch)
+ git describe --contains --all HEAD ;;
+ (describe)
+ git describe HEAD ;;
+ (* | default)
+ git describe --tags --exact-match HEAD ;;
+ esac 2>/dev/null)" ||
+
+ b="$short_sha..."
+ b="($b)"
+ fi
+ fi
+ fi
+
+ if [ -n "$step" ] && [ -n "$total" ]; then
+ r="$r $step/$total"
+ fi
+
+ local w=""
+ local i=""
+ local s=""
+ local u=""
+ local c=""
+ local p=""
+
+ if [ "true" = "$inside_gitdir" ]; then
+ if [ "true" = "$bare_repo" ]; then
+ c="BARE:"
+ else
+ b="GIT_DIR!"
+ fi
+ elif [ "true" = "$inside_worktree" ]; then
+ if [ -n "${GIT_PS1_SHOWDIRTYSTATE-}" ] &&
+ [ "$(git config --bool bash.showDirtyState)" != "false" ]
+ then
+ git diff --no-ext-diff --quiet --exit-code || w="*"
+ if [ -n "$short_sha" ]; then
+ git diff-index --cached --quiet HEAD -- || i="+"
+ else
+ i="#"
+ fi
+ fi
+ if [ -n "${GIT_PS1_SHOWSTASHSTATE-}" ] &&
+ [ -r "$g/refs/stash" ]; then
+ s="$"
+ fi
+
+ if [ -n "${GIT_PS1_SHOWUNTRACKEDFILES-}" ] &&
+ [ "$(git config --bool bash.showUntrackedFiles)" != "false" ] &&
+ git ls-files --others --exclude-standard --error-unmatch -- '*' >/dev/null 2>/dev/null
+ then
+ u="%${ZSH_VERSION+%}"
+ fi
+
+ if [ -n "${GIT_PS1_SHOWUPSTREAM-}" ]; then
+ __git_ps1_show_upstream
+ fi
+ fi
+
+ local z="${GIT_PS1_STATESEPARATOR-" "}"
+
+ # NO color option unless in PROMPT_COMMAND mode
+ if [ $pcmode = yes ] && [ -n "${GIT_PS1_SHOWCOLORHINTS-}" ]; then
+ __git_ps1_colorize_gitstring
+ fi
+
+ b=${b##refs/heads/}
+ if [ $pcmode = yes ]; then
+ # In pcmode (and only pcmode) the contents of
+ # $gitstring are subject to expansion by the shell.
+ # Avoid putting the raw ref name in the prompt to
+ # protect the user from arbitrary code execution via
+ # specially crafted ref names (e.g., a ref named
+ # '$(IFS=_;cmd=sudo_rm_-rf_/;$cmd)' would execute
+ # 'sudo rm -rf /' when the prompt is drawn). Instead,
+ # put the ref name in a new global variable (in the
+ # __git_ps1_* namespace to avoid colliding with the
+ # user's environment) and reference that variable from
+ # PS1.
+ __git_ps1_branch_name=$b
+ # note that the $ is escaped -- the variable will be
+ # expanded later (when it's time to draw the prompt)
+ b="\${__git_ps1_branch_name}"
+ fi
+
+ local f="$w$i$s$u"
+ local gitstring="$c$b${f:+$z$f}$r$p"
+
+ if [ $pcmode = yes ]; then
+ if [ "${__git_printf_supports_v-}" != yes ]; then
+ gitstring=$(printf -- "$printf_format" "$gitstring")
+ else
+ printf -v gitstring -- "$printf_format" "$gitstring"
+ fi
+ PS1="$ps1pc_start$gitstring$ps1pc_end"
+ else
+ printf -- "$printf_format" "$gitstring"
+ fi
+}
diff --git a/dotfiles/.local/bin/i3barbattery b/dotfiles/.local/bin/i3barbattery
new file mode 100755
index 0000000..edc89c3
--- /dev/null
+++ b/dotfiles/.local/bin/i3barbattery
@@ -0,0 +1,34 @@
+#!/bin/sh
+# Taken from Luke Smith's rice
+# Takes battery name as an argument (e.g. BAT0)
+
+case $BLOCK_BUTTON in
+ 3) notify-send "🔋 Battery module" "🔋: discharging
+🛑: not charging
+♻: stagnant charge
+🔌: charging
+⚡: charged
+❗: battery very low!
+- Text color reflects charge left" ;;
+esac
+
+capacity=$(cat /sys/class/power_supply/"$1"/capacity) || exit
+status=$(cat /sys/class/power_supply/"$1"/status)
+
+if [ "$capacity" -ge 75 ]; then
+ color="#689d6a"
+elif [ "$capacity" -ge 50 ]; then
+ color="#ffffff"
+elif [ "$capacity" -ge 25 ]; then
+ color="#ffff00"
+else
+ color="#ff0000"
+ warn="❗"
+fi
+
+[ -z $warn ] && warn=" "
+
+[ "$status" = "Charging" ] && color="#ffffff"
+
+printf "<span color='%s'>%s%s%s</span>" "$color" "$(echo "$status" | sed -e "s/,//;s/Discharging/🔋/;s/Not Charging/🛑/;s/Charging/🔌/;s/Unknown/♻️/;s/Full/⚡/;s/ 0*/ /g;s/ :/ /g")" "$warn" "$(echo "$capacity" | sed -e 's/$/%/')"
+
diff --git a/dotfiles/.local/bin/i3barmusic b/dotfiles/.local/bin/i3barmusic
new file mode 100755
index 0000000..5647a81
--- /dev/null
+++ b/dotfiles/.local/bin/i3barmusic
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+filter() {
+ sed "/^volume:/d" | tac | sed -e "s/\\&/&amp;/g;s/\\[paused\\].*/<span color=\"gray\" font_style=\"italic\">/g;s/\\[playing\\].*/<span>/g" | tr -d '\n' | sed -e "s/$/<\\/span>/g"
+ }
+
+case $BLOCK_BUTTON in
+ 1) mpc toggle | filter ;;
+ 2) mpc status | filter && setsid "$TERMINAL" -e ncmpcpp & ;;
+ 3) mpc status | filter && notify-send "🎵 Music module" "\- Shows mpd song playing.
+- Italic when paused.
+- Left click opens ncmpcpp.
+- Middle click pauses.
+- Scroll changes track.";; # right click, pause/unpause
+ 4) mpc prev | filter ;; # scroll up, previous
+ 5) mpc next | filter ;; # scroll down, next
+ *) mpc status | filter ;;
+esac; exit
diff --git a/dotfiles/.local/bin/i3barrecstatus b/dotfiles/.local/bin/i3barrecstatus
new file mode 100755
index 0000000..5c8160a
--- /dev/null
+++ b/dotfiles/.local/bin/i3barrecstatus
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ -f "$HOME/.recordingpid" ]; then
+ printf "rec ⏺"
+ exit
+fi
+
+printf ""
diff --git a/dotfiles/.local/bin/i3barweather b/dotfiles/.local/bin/i3barweather
new file mode 100755
index 0000000..0ae6d3c
--- /dev/null
+++ b/dotfiles/.local/bin/i3barweather
@@ -0,0 +1,18 @@
+#!/bin/bash
+
+location="Saint Petersburg"
+
+if [[ "$location" != "" ]]
+then
+ location="~${location// /+}"
+fi
+
+forecast=$(curl -s wttr.in/$location?format=1)
+
+if [[ ${#forecast} -gt 30 ]]
+then
+ exit
+fi
+
+echo $forecast
+
diff --git a/dotfiles/.local/bin/linkhandler b/dotfiles/.local/bin/linkhandler
new file mode 100755
index 0000000..c616d04
--- /dev/null
+++ b/dotfiles/.local/bin/linkhandler
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+# Feed script a url or file location.
+# If an image, it will view in sxiv,
+# if a video or gif, it will view in mpv
+# if a music file or pdf, it will download,
+# otherwise it opens link in browser.
+
+# If no url given. Opens browser. For using script as $BROWSER.
+[ -z "$1" ] && { "$BROWSER"; exit; }
+
+case "$1" in
+ *mkv|*webm|*mp4|*youtube.com*|*youtu.be*|*hooktube.com*|*bitchute.com*)
+ setsid mpv --input-ipc-server=/tmp/mpvsoc$(date +%s) -quiet "$1" >/dev/null 2>&1 & ;;
+ *png|*jpg|*jpe|*jpeg|*gif)
+ curl -sL "$1" > "/tmp/$(echo "$1" | sed "s/.*\///")" && sxiv -a "/tmp/$(echo "$1" | sed "s/.*\///")" >/dev/null 2>&1 & ;;
+ *mp3|*flac|*opus|*mp3?source*)
+ setsid tsp curl -LO "$1" >/dev/null 2>&1 & ;;
+ *)
+ if [ -f "$1" ]; then "$TERMINAL" -e "$EDITOR $1"
+ else setsid "$BROWSER" "$1" >/dev/null 2>&1 & fi ;;
+esac
diff --git a/dotfiles/.local/bin/listsinks b/dotfiles/.local/bin/listsinks
new file mode 100755
index 0000000..d76e3e2
--- /dev/null
+++ b/dotfiles/.local/bin/listsinks
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+pactl list short sinks | awk '{ print $2 }'
diff --git a/dotfiles/.local/bin/lmc b/dotfiles/.local/bin/lmc
new file mode 100755
index 0000000..c740c0c
--- /dev/null
+++ b/dotfiles/.local/bin/lmc
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+case "$1" in
+ "up") pamixer --allow-boost -i "$2" || amixer sset Master 2%+ ;;
+ "down") pamixer --allow-boost -d "$2" || amixer sset Master 2%- ;;
+ "mute") pamixer --allow-boost -t || amixer sset Master toggle ;;
+ "truemute") pamixer --allow-boost -m || amixer sset Master mute ;;
+ "toggle") mpc toggle ; $newmpd ;;
+ "pause") mpc pause ; $newmpd ;;
+ "forward") mpc seek +"$2" ; $newmpd ;;
+ "back") mpc seek -"$2" ; $newmpd ;;
+ "next") mpc next ; $newmpd ;;
+ "prev") mpc prev ; $newmpd ;;
+ "replay") mpc seek 0% ; $newmpd ;;
+esac
+
+exit
diff --git a/dotfiles/.local/bin/lock-color b/dotfiles/.local/bin/lock-color
new file mode 100755
index 0000000..445d779
--- /dev/null
+++ b/dotfiles/.local/bin/lock-color
@@ -0,0 +1,86 @@
+#!/bin/sh
+
+#B='#00000000' # blank
+#C='#ffffff22' # clear ish
+#D='#b58900ff' # default
+#T='#fcbd00dd' # text
+#W='#880000bb' # wrong
+#V='#fcbd00dd' # verifying
+
+B='#00000000' # blank
+C='#ffffff22' # clear ish
+D='#ffffffff' # default
+T='#dac99dff' # text
+W='#880000bb' # wrong
+V='#023982dd' # verifying
+# Approximate timeout rate in milliseconds (checked every 5 seconds).
+timeout="30000"
+
+
+if [ "$(ps cax | grep sway)" ]; then
+ swaylock &
+
+ swayidle timeout 15 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' &
+
+ while [ "$(pgrep -x swaylock)" ]
+ do
+ sleep 1
+ done
+
+ pkill -n swayidle
+ exit
+fi
+# Take a screenshot:
+#scrot /tmp/screen.png
+
+#cp ~/.config/wall.png /tmp/screen.png
+# Create a blur on the shot:
+#convert /tmp/screen.png -paint 1 -swirl 360 /tmp/screen.png
+#convert /tmp/screen.png -brightness-contrast -20,-20 -paint 1 -noise 0x8 -blur 9,9 /tmp/screen.png
+
+i3lock \
+ --layoutcolor=$T \
+ --timecolor=$T \
+ --datecolor=$T \
+ --verifcolor=$T \
+ --wrongcolor=$W \
+ --keyhlcolor=$V \
+ --insidecolor=$B \
+ --ringcolor=$T \
+ --linecolor=$B \
+ --separatorcolor=$D \
+ --insidecolor=$B \
+ --insidewrongcolor=$B \
+ --insidevercolor=$B \
+ --color=#000000 \
+ --clock \
+ --radius=150 \
+ --ring-width=5 \
+ --timestr="%H:%M:%S" \
+ --datestr="%A %e, %b %Y" \
+ --veriftext="Verifying..." \
+ --wrongtext="Nope!" \
+ --noinputtext="BLANK" \
+ --time-font=furacodenerdfontmono \
+ --date-font=ibmplexsans \
+ --timesize=45 \
+ --datesize=24 \
+
+# If still locked after $timeout milliseconds, turn off screen.
+while [ "$(pgrep -x i3lock)" ]
+do
+ if [ $timeout -lt $(xssstate -i) ]
+ then
+ xset dpms force off
+ fi
+ sleep 1
+done
+
+# --blur 7 \
+# --keylayout 2 \
+# --textsize=20
+# --modsize=10
+# --timefont=comic-sans
+# --datefont=monofur
+# etc
+
diff --git a/dotfiles/.local/bin/mailcheck b/dotfiles/.local/bin/mailcheck
new file mode 100755
index 0000000..bf49de9
--- /dev/null
+++ b/dotfiles/.local/bin/mailcheck
@@ -0,0 +1,35 @@
+#!/bin/sh
+# Sync mail and give notification if there is new mail.
+
+# Run only if user logged in (prevent cron errors)
+w | grep "^$USER\W" >/dev/null || exit
+
+# Checks for internet connection and set notification script.
+ping -q -c 1 1.1.1.1 > /dev/null || exit
+command -v notify-send >/dev/null || echo "Note that \`libnotify\` or \`libnotify-send\` should be installed for pop-up mail notifications with this script."
+
+export DISPLAY=:0.0
+
+notify() {
+ notify-send "📬 Email" "$2 new mail(s) in \`$1\` account."
+ mplayer $HOME/.soundalerts/mail.mp3
+}
+
+# Run mbsync. You can feed this script different settings.
+if [ $# -eq 0 ]; then
+ mbsync -a
+else
+ mbsync "$@"
+fi
+
+# Check all accounts/mailboxes for new mail. Notify if there is new content.
+for account in "$HOME/.local/share/mail/"*
+do
+ acc="$(echo "$account" | sed "s/.*\///")"
+ newcount=$(find "$HOME/.local/share/mail/$acc/INBOX/new/" "$HOME/.local/share/mail/$acc/Inbox/new/" "$HOME/.local/share/mail/$acc/inbox/new/" -type f -newer "$HOME/.config/mutt/.mailsynclastrun" 2> /dev/null | wc -l)
+ [ "$newcount" -gt "0" ] && notify "$acc" "$newcount" &
+done
+notmuch new 2>/dev/null
+
+#Create a touch file that indicates the time of the last run of mailsync
+touch "$HOME/.config/mutt/.mailsynclastrun"
diff --git a/dotfiles/.local/bin/mako_launch b/dotfiles/.local/bin/mako_launch
new file mode 100755
index 0000000..4b61208
--- /dev/null
+++ b/dotfiles/.local/bin/mako_launch
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+# Terminate already running mako instance
+killall -q mako
+
+# Wait until the processes have been shut down
+while pgrep -u $UID -x mako >/dev/null; do sleep 1; done
+
+mako --background-color "#2d333ff3" --border-color "#434c5e" --text-color "#e5e9f0" --font="BlexMono Nerd Font Mono 10" --default-timeout 5000 --height 300
diff --git a/dotfiles/.local/bin/menublk b/dotfiles/.local/bin/menublk
new file mode 100755
index 0000000..0ca0607
--- /dev/null
+++ b/dotfiles/.local/bin/menublk
@@ -0,0 +1,106 @@
+#!/bin/bash
+
+# Script for mounting/unmounting drives (including encrypted ones)
+# For encrypted drives, it works only if there's just one partition inside the
+# crypt_LUKS volume
+
+# Yaroslav de la Peña Smirnov
+
+. $HOME/.bemenurc
+
+readarray -t blkdevs <<< "$(lsblk -r -o NAME,TYPE,FSTYPE,MOUNTPOINT | tail -n +2)"
+
+get_mountable() {
+ for blkdev in "${blkdevs[@]}"; do
+ name="$(cut -d " " -f1 <<< "${blkdev}")"
+ btype="$(cut -d " " -f2 <<< "${blkdev}")"
+ fstype="$(cut -d " " -f3 <<< "${blkdev}")"
+ mountpoint="$(cut -d " " -f4 <<< "${blkdev}")"
+ if [ "$btype" = "part" ]; then
+ if [ -z "$mountpoint" ]; then
+ if [ "$fstype" = "crypto_LUKS" ]; then
+ if [ "$(lsblk -r -o FSTYPE "/dev/$name" | tail -n 1)" = "crypto_LUKS" ]; then
+ echo "$name"
+ fi
+ else
+ echo "$name"
+ fi
+ fi
+ fi
+ done
+}
+
+get_unmountable() {
+ for blkdev in "${blkdevs[@]}"; do
+ name="$(cut -d " " -f1 <<< "${blkdev}")"
+ btype="$(cut -d " " -f2 <<< "${blkdev}")"
+ fstype="$(cut -d " " -f3 <<< "${blkdev}")"
+ mountpoint="$(cut -d " " -f4 <<< "${blkdev}")"
+ if [ "$btype" = "part" ]; then
+ if [ -z "$mountpoint" ] && [ "$fstype" = "crypto_LUKS" ]; then
+ mountpoint="$(lsblk -r -o MOUNTPOINT "/dev/$name" | tail -n 1)"
+ fi
+ if [ -n "$mountpoint" ] && [ "$mountpoint" != "/" ] && [ "$mountpoint" != "/boot" ]; then
+ echo "$name"
+ fi
+ fi
+ done
+}
+
+mount_dev() {
+ fstype="$(lsblk -r -o FSTYPE "/dev/$1" | tail -n 1)"
+ part="/dev/$1"
+ if [ "$fstype" = "crypto_LUKS" ]; then
+ password="$(bemenu -p "Enter passphrase for encrypted drive:" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --ff="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")"
+ if [ -z "$password" ]; then
+ exit 0
+ fi
+ printf "%s" "$password" > "$HOME/.cache/diskey"
+ part="$(udisksctl unlock --key-file="$HOME/.cache/diskey" -b "/dev/$1" | cut -d " " -f4 )"
+ part="${part%?}"
+ rm -f "$HOME/.cache/diskey"
+ fi
+ message="$(udisksctl mount -b "$part")"
+ if [ $? -eq 0 ]; then
+ notify-send "💽Drive mounting" "$message"
+ else
+ notify-send "💽Drive mounting" "An error occurred, could not mount device $1"
+ fi
+}
+
+unmount_dev() {
+ fstype="$(lsblk -r -o FSTYPE "/dev/$1" | sed "2q;d")"
+ if [ "$fstype" = "crypto_LUKS" ]; then
+ volume="/dev/mapper/$(lsblk -r -o NAME "/dev/$1" | tail -n 1)"
+ if udisksctl unmount -b "$volume" && udisksctl lock -b "/dev/$1"; then
+ notify-send "💽Drive manager" "Device $1 has been unmounted and locked"
+ else
+ notify-send "💽Drive manager" "An error occurred, could not unmount device $1"
+ fi
+ else
+ if udisksctl unmount -b "/dev/$1"; then
+ notify-send "💽Drive manager" "Device $1 has been unmounted"
+ else
+ notify-send "💽Drive manager" "An error occurred, could not unmount device $1"
+ fi
+ fi
+}
+
+action="$(printf "mount\nunmount\n" | bemenu -p "What to do?" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")"
+
+case "$action" in
+ mount)
+ blkdev="$(get_mountable | bemenu -p "Choose device to mount:" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")"
+ if [ -z "$blkdev" ]; then
+ exit 0
+ fi
+ mount_dev "$blkdev";;
+ unmount)
+ blkdev="$(get_unmountable | bemenu -p "Choose device to umount:" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")"
+ if [ -z "$blkdev" ]; then
+ exit 0
+ fi
+ unmount_dev "$blkdev";;
+ *)
+ notify-send "💽Drive manager" "That's not an option";;
+esac
diff --git a/dotfiles/.local/bin/menudisplay b/dotfiles/.local/bin/menudisplay
new file mode 100755
index 0000000..6064bff
--- /dev/null
+++ b/dotfiles/.local/bin/menudisplay
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+display=$(swaymsg -t get_outputs | grep -E "name" | sed "s/^.*\"name\": \"//g;s/\",$//g;" | bemenu -p "Select output: " --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")
+
+if [ -z $display ]; then
+ exit 0
+fi
+
+action=$(printf "enable\ndisable\n" | bemenu -p "Choose action: " --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")
+
+swaymsg output $display $action
diff --git a/dotfiles/.local/bin/menuducksearch b/dotfiles/.local/bin/menuducksearch
new file mode 100755
index 0000000..979c365
--- /dev/null
+++ b/dotfiles/.local/bin/menuducksearch
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+# Gives a dmenu prompt to search DuckDuckGo.
+# Without input, will open DuckDuckGo.com.
+# Anything else, it search it.
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+choice=$(echo "" | bemenu -i -p "Search DuckDuckGo:" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB") || exit 1
+
+if [ "$choice" = "" ]; then
+ $BROWSER "https://duckduckgo.com"
+else
+ $BROWSER "https://duckduckgo.com/?q=$choice&t=ffab&atb=v1-1"
+fi
diff --git a/dotfiles/.local/bin/menuemoji b/dotfiles/.local/bin/menuemoji
new file mode 100755
index 0000000..8f0720c
--- /dev/null
+++ b/dotfiles/.local/bin/menuemoji
@@ -0,0 +1,16 @@
+#!/bin/sh
+# Give dmenu list of all unicode characters to copy.
+# Shows the selected character in dunst if running.
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+chosen=$(grep -v "#" ~/.emoji | bemenu -i -l 25 --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")
+
+if [ -z $chosen ]; then
+ exit 0
+fi
+
+c=$(echo "$chosen" | sed "s/ .*//")
+echo "$c" | tr -d '\n' | wl-copy
+notify-send "'$c' copied to clipboard."
diff --git a/dotfiles/.local/bin/menugrim b/dotfiles/.local/bin/menugrim
new file mode 100755
index 0000000..bc77c11
--- /dev/null
+++ b/dotfiles/.local/bin/menugrim
@@ -0,0 +1,33 @@
+#!/bin/sh
+
+if ! [ -d $SCROT_DIR ]; then
+ mkdir -p $SCROT_DIR
+fi
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+notify_saved() {
+ notify-send "screenshot has been saved in $SCROT_DIR" ;
+}
+
+notify_copied() {
+ notify-send "screenshot has been copied to clipboard" ;
+}
+
+case "$1" in
+ --quick|-q)
+ grim $SCROT_DIR/fullscreen-"$(date '+%y%m%d-%H%M-%S').png"; notify_saved ;;
+ *)
+ case "$(printf "a selected area\ncurrent window\nfull screen\na selected area (copy)\ncurrent window (copy)\nfull screen (copy)\n" | bemenu -l 6 -i -p "Screenshot which area?" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")" in
+ "a selected area") grim -g "$(slurp)" $SCROT_DIR/selected-"$(date '+%y%m%d-%H%M-%S').png"; notify_saved ;;
+ "current window") grim -g "$(swaygetcurrentwindow)" $SCROT_DIR/window-"$(date '+%y%m%d-%H%M-%S').png"; notify_saved ;;
+ "full screen") grim $SCROT_DIR/fullscreen-"$(date '+%y%m%d-%H%M-%S').png"; notify_saved ;;
+ "a selected area (copy)") grim -g "$(slurp)" - | wl-copy; notify_copied ;;
+ "current window (copy)") grim -g "$(swaygetcurrentwindow)" - | wl-copy; notify_copied ;;
+ "full screen (copy)") grim - | wl-copy; notify_copied ;;
+ *) exit 0 ;;
+ esac
+esac
+
+
diff --git a/dotfiles/.local/bin/menumako b/dotfiles/.local/bin/menumako
new file mode 100755
index 0000000..6589c32
--- /dev/null
+++ b/dotfiles/.local/bin/menumako
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+makoctl menu bemenu '-p "What to do?" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB"'
diff --git a/dotfiles/.local/bin/menuoutput b/dotfiles/.local/bin/menuoutput
new file mode 100755
index 0000000..5e29f66
--- /dev/null
+++ b/dotfiles/.local/bin/menuoutput
@@ -0,0 +1,13 @@
+#!/bin/sh
+# Change audio output for all streams and set as default using dmenu
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+output=$(listsinks | bemenu -p "Select audio output: " --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")
+
+[ "$output" != "" ] || exit
+
+changeoutput $output
+
+notify-send "🔉 Audio output switched" "Audio output switched to '$output'"
diff --git a/dotfiles/.local/bin/menuprompt b/dotfiles/.local/bin/menuprompt
new file mode 100755
index 0000000..c336679
--- /dev/null
+++ b/dotfiles/.local/bin/menuprompt
@@ -0,0 +1,7 @@
+#!/bin/sh
+# A dmenu binary prompt script.
+# Gives a dmenu prompt labeled with $1 to perform command $2.
+# For example:
+# `./prompt "Do you want to shutdown?" "shutdown -h now"`
+
+[ "$(printf "No\\nYes" | bemenu -i -p "$1" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")" = "Yes" ] && $2
diff --git a/dotfiles/.local/bin/menurun b/dotfiles/.local/bin/menurun
new file mode 100755
index 0000000..530cac7
--- /dev/null
+++ b/dotfiles/.local/bin/menurun
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+action=$(compgen -c | sort -u | bemenu -p "Run:" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")
+$action
+
diff --git a/dotfiles/.local/bin/menusession b/dotfiles/.local/bin/menusession
new file mode 100755
index 0000000..3867b73
--- /dev/null
+++ b/dotfiles/.local/bin/menusession
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+action=$(printf "logout\nsuspend\nreboot\npoweroff\n" | bemenu -p "What to do?" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")
+
+swaysession $action
diff --git a/dotfiles/.local/bin/menuxrun b/dotfiles/.local/bin/menuxrun
new file mode 100755
index 0000000..7ce556e
--- /dev/null
+++ b/dotfiles/.local/bin/menuxrun
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# Source settings from .bemenurc
+. $HOME/.bemenurc
+
+action=$(compgen -c | sort -u | bemenu -p "Force run inside XWayland:" --tf="$BEMENU_TF" --tb="$BEMENU_NB" --fb="$BEMENU_NB" --fn="$BEMENU_FN" --nb="$BEMENU_NB" --nf="$BEMENU_NF" --hf="$BEMENU_HF" --hb="$BEMENU_HB")
+xway $action
diff --git a/dotfiles/.local/bin/mopidy_launch b/dotfiles/.local/bin/mopidy_launch
new file mode 100755
index 0000000..d6bd4cf
--- /dev/null
+++ b/dotfiles/.local/bin/mopidy_launch
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+killall -q mopidy
+mopidy
diff --git a/dotfiles/.local/bin/notistats b/dotfiles/.local/bin/notistats
new file mode 100755
index 0000000..0da5b7b
--- /dev/null
+++ b/dotfiles/.local/bin/notistats
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+body=$(echo -e "Screen brightness:\t$(xbacklight -get)";
+lscpu | grep 'CPU MHz';
+sensors | grep 'Package id 0' | sed 's/Package id 0/CPU temp/' | awk '{print $1 $2 "\t" $3}';
+sensors | grep 'fan';
+echo print\(\'BAT0 drainage:\\t{}W\'.format\($(grep 'POWER_SUPPLY_POWER_NOW' /sys/class/power_supply/BAT0/uevent | awk -F '=' '{print $2}')/1000000\)\) | python;
+echo print\(\'BAT1 drainage:\\t{}W\'.format\($(grep 'POWER_SUPPLY_POWER_NOW' /sys/class/power_supply/BAT1/uevent | awk -F '=' '{print $2}')/1000000\)\) | python)
+
+notify-send "Hardware status" "$body"
diff --git a/dotfiles/.local/bin/paccheck b/dotfiles/.local/bin/paccheck
new file mode 100755
index 0000000..1284134
--- /dev/null
+++ b/dotfiles/.local/bin/paccheck
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+ping -q -c 1 1.1.1.1 > /dev/null || exit
+
+notify-send "⬆ Update check" "Checking for updates..."
+
+sudo pacman -Sy
+upno=$(pacman -Qu | wc -l)
+
+notify-send "⬆ Update Check" "$upno updates are available"
diff --git a/dotfiles/.local/bin/qmi_setup b/dotfiles/.local/bin/qmi_setup
new file mode 100755
index 0000000..62fcc82
--- /dev/null
+++ b/dotfiles/.local/bin/qmi_setup
@@ -0,0 +1,104 @@
+#!/bin/bash
+
+###
+# This script automate the setup of QMI supported wwan devices.
+#
+# Tested on following environment:
+# * Lenovo ThinkPad X220 (4286-CTO)
+# * Gentoo/Linux, Linux Kernel 3.9.6
+# * NTT Docomo UIM card (Xi LTE SIM)
+# * Sierra Wireless, Inc. Gobi 3000 wireless wan module
+# (FRU 60Y3257, vendor and device id is 1199:9013)
+# memo:
+# I recommend to check if your wwan module works fine
+# for your mobile broadband provider with Windows
+# especially if you imported the device from other country.
+# You may have to initialize your device for your region.
+# * Required kernel config (other modules may be also required):
+# - qmi_wwan (CONFIG_USB_NET_QMI_WWAN)
+# - qcserial (CONFIG_USB_SERIAL_QUALCOMM)
+# * Required settings:
+# - you may have to create /etc/qmi-network.conf.
+# My qmi-network.conf has only a line "APN=mopera.net".
+#
+
+# your wwan device name created by qmi_wwan kernel module
+# check it with "ip a" or "ifconfig -a". it may be wwan0?
+WWAN_DEV=wwp0s20f0u6
+# your cdc_wdm modem location
+CDC_WDM=/dev/cdc-wdm0
+# this script uses following qmi commands
+QMICLI=/usr/bin/qmicli
+QMI_NETWORK=/usr/bin/qmi-network
+# the places of following commands vary depending on your distribution
+IFCONFIG=/usr/bin/ifconfig
+DHCPCD=/usr/bin/dhcpcd
+SUDO=/usr/bin/sudo
+
+function helpmsg {
+ echo "usage: $0 {start|stop|restart|status}"
+ exit 1
+}
+
+function qmi_start {
+ $COMMAND_PREFIX $IFCONFIG $WWAN_DEV up
+ $COMMAND_PREFIX $QMICLI -d $CDC_WDM --dms-set-operating-mode=online
+ if [ $? -ne 0 ]; then
+ echo "your wwan device may be RFKilled?"
+ exit 1
+ fi
+ $COMMAND_PREFIX $QMI_NETWORK $CDC_WDM start
+ $COMMAND_PREFIX $DHCPCD $WWAN_DEV
+}
+
+function qmi_stop {
+ $COMMAND_PREFIX $QMI_NETWORK $CDC_WDM stop
+ $COMMAND_PREFIX kill `cat /var/run/dhcpcd-${WWAN_DEV}.pid`
+ $COMMAND_PREFIX $IFCONFIG $WWAN_DEV down
+}
+
+function qmi_strength {
+ dbm=`$COMMAND_PREFIX $QMICLI -d $CDC_WDM --nas-get-signal-strength | tr "'" " " | grep Network | head -1 | awk '{print $4}'`
+ echo -n "Signal strength is "
+ if [ $dbm -ge -73 ]; then
+ echo -n 'Excellent'
+ elif [ $dbm -ge -83 ]; then
+ echo -n 'Good'
+ elif [ $dbm -ge -93 ]; then
+ echo -n 'OK'
+ elif [ $dbm -ge -109 ]; then
+ echo -n 'Marginal'
+ else
+ echo Unknown
+ fi
+ echo " (${dbm} dBm)"
+}
+
+function qmi_status {
+ $COMMAND_PREFIX $QMI_NETWORK $CDC_WDM status
+ qmi_strength
+}
+
+# check argument number
+if [ $# -ne 1 ]
+then
+ helpmsg
+fi
+
+# check permission
+if [ `whoami` != 'root' ]
+then
+ echo "warning: root permission required. setting command prefix to 'sudo'."
+ COMMAND_PREFIX=$SUDO
+fi
+
+# run commands
+case $1 in
+ start) qmi_start ;;
+ stop) qmi_stop ;;
+ restart) qmi_stop; qmi_start ;;
+ status) qmi_status ;;
+ *) helpmsg ;;
+esac
+
+
diff --git a/dotfiles/.local/bin/setbg b/dotfiles/.local/bin/setbg
new file mode 100755
index 0000000..29a11d7
--- /dev/null
+++ b/dotfiles/.local/bin/setbg
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+swaymsg output "*" background ~/.config/wall1.png fill
diff --git a/dotfiles/.local/bin/setbglblur b/dotfiles/.local/bin/setbglblur
new file mode 100755
index 0000000..8a3d51b
--- /dev/null
+++ b/dotfiles/.local/bin/setbglblur
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+vertical=$(swaymsg -t get_outputs | jq ".[0].current_mode.height")
+horizontal=$(swaymsg -t get_outputs | jq ".[0].current_mode.width")
+
+convert $1 -resize ${horizontal}x${vertical}\> ~/.config/lockwall.png
+convert ~/.config/lockwall.png -brightness-contrast -20,-20 -paint 1 -noise 0x8 -blur 9,9 ~/.config/lockwall.png
+convert ~/.config/lockwall.png ~/.config/lock.png -gravity center -composite ~/.config/lockwall.png
diff --git a/dotfiles/.local/bin/setbglsimple b/dotfiles/.local/bin/setbglsimple
new file mode 100755
index 0000000..ea2c5f2
--- /dev/null
+++ b/dotfiles/.local/bin/setbglsimple
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+vertical=$(($(xdotool getdisplaygeometry | awk '{print $2}') - newsize))
+horizontal=$(($(xdotool getdisplaygeometry | awk '{print $1}') - newwidth))
+
+convert $1 -resize ${horizontal}x${vertical}\> ~/.config/lockwall.png
+convert ~/.config/lockwall.png ~/.config/lock.png -gravity center -composite ~/.config/lockwall.png
diff --git a/dotfiles/.local/bin/swaygetcurrentwindow b/dotfiles/.local/bin/swaygetcurrentwindow
new file mode 100755
index 0000000..e6403a6
--- /dev/null
+++ b/dotfiles/.local/bin/swaygetcurrentwindow
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+xydata=$(swaymsg -t get_tree | grep -B 5 '"focused": true' | head -n 4 | tr -d '\n\r' | sed -e 's/[^0-9,]//g' -e 's/,/ /2' -e 's/,/x/2')
+
+echo $xydata
diff --git a/dotfiles/.local/bin/swaykbd b/dotfiles/.local/bin/swaykbd
new file mode 100755
index 0000000..a76f833
--- /dev/null
+++ b/dotfiles/.local/bin/swaykbd
@@ -0,0 +1,20 @@
+#!/bin/sh
+
+swaymsg -r -t get_inputs | awk '/1:1:AT_Translated_Set_2_keyboard/;/xkb_active_layout_name/' | grep -A1 '\b1:1:AT_Translated_Set_2_keyboard\b' | grep "xkb_active_layout_name" | awk -F '"' '{print $4}'
+
+swaymsg \
+ --type subscribe \
+ --monitor \
+ --raw \
+ '["input"]' | \
+ jq \
+ --raw-output \
+ --unbuffered \ '
+ select(.change == "xkb_layout") |
+ .input.xkb_active_layout_name |
+ sub(" \\(US\\)"; "")
+ '
+
+case $BLOCK_BUTTON in
+ 1) echo "TO-DO" ;;
+esac;
diff --git a/dotfiles/.local/bin/swayrecord b/dotfiles/.local/bin/swayrecord
new file mode 100755
index 0000000..90ed24a
--- /dev/null
+++ b/dotfiles/.local/bin/swayrecord
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+if [ -f "$HOME/.recordingpid" ]; then
+ killall -SIGINT wf-recorder
+ rm -f ~/.recordingpid
+ notify-send "⏺ Screen recording" "Recording stopped"
+ killall -39 waybar
+ exit
+fi
+
+wf-recorder -f "$HOME/Video/recordings/$(date '+%y%m%d-%H%M-%S').mp4" &
+echo $! > ~/.recordingpid
+notify-send "⏺ Screen recording" "Recording started"
+killall -39 waybar
diff --git a/dotfiles/.local/bin/swayresize b/dotfiles/.local/bin/swayresize
new file mode 100755
index 0000000..9ae94c0
--- /dev/null
+++ b/dotfiles/.local/bin/swayresize
@@ -0,0 +1,27 @@
+#!/bin/sh
+# This script was made by `goferito` on Github.
+# Some cleanup by Luke.
+
+[ -z "$1" ] && echo "No direction provided" && exit 1
+distanceStr="2 px or 2 ppt"
+
+moveChoice() {
+ swaymsg resize "$1" "$2" "$distanceStr" | grep '"success":true' || \
+ swaymsg resize "$3" "$4" "$distanceStr"
+}
+
+case $1 in
+ up)
+ moveChoice grow up shrink down
+ ;;
+ down)
+ moveChoice shrink up grow down
+ ;;
+ left)
+ moveChoice shrink right grow left
+ ;;
+ right)
+ moveChoice grow right shrink left
+ ;;
+esac
+
diff --git a/dotfiles/.local/bin/swaysession b/dotfiles/.local/bin/swaysession
new file mode 100755
index 0000000..0507368
--- /dev/null
+++ b/dotfiles/.local/bin/swaysession
@@ -0,0 +1,35 @@
+#!/bin/sh
+# /usr/bin/i3exit
+
+# on void just sudo
+[[ $(cat /proc/1/comm) == "systemd" ]] && logind=systemctl || logind=loginctl
+
+case "$1" in
+ lock)
+ lock-color
+ ;;
+ logout)
+ swaymsg exit
+ ;;
+ switch_user)
+ dm-tool switch-to-greeter
+ ;;
+ suspend)
+ lock-color & sleep 1 && $logind suspend
+ ;;
+ hibernate)
+ lock-color & sleep 1 && $logind hibernate
+ ;;
+ reboot)
+ $logind reboot
+ ;;
+ poweroff)
+ $logind poweroff
+ ;;
+ *)
+ echo "== ! i3exit: missing or invalid argument ! =="
+ echo "Try again with: lock | logout | switch_user | suspend | hibernate | reboot | shutdown"
+ exit 2
+esac
+
+exit 0
diff --git a/dotfiles/.local/bin/swaystart b/dotfiles/.local/bin/swaystart
new file mode 100755
index 0000000..46f6f0e
--- /dev/null
+++ b/dotfiles/.local/bin/swaystart
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+export SCROT_DIR=$HOME/Pictures/screenshots/
+export GDK_BACKEND=wayland
+export EGL_PLATFORM=wayland
+export CLUTTER_PLATFORM=wayland
+export SDL_VIDEODRIVER=wayland
+export QT_QPA_PLATFORM=wayland-egl
+export QT_WAYLAND_DISABLE_WINDOWDECORATION=1
+export QT_QPA_PLATFORMTHEME="qt5ct"
+export _JAVA_AWT_WM_NONREPARENTING=1
+sway --my-next-gpu-wont-be-nvidia
diff --git a/dotfiles/.local/bin/sxiv-rifle b/dotfiles/.local/bin/sxiv-rifle
new file mode 100755
index 0000000..0bdd892
--- /dev/null
+++ b/dotfiles/.local/bin/sxiv-rifle
@@ -0,0 +1,48 @@
+#!/bin/sh
+# Compatible with ranger 1.6.0 through 1.7.*
+#
+# This script searches image files in a directory, opens them all with sxiv and
+# sets the first argument to the first image displayed by sxiv.
+#
+# This is supposed to be used in rifle.conf as a workaround for the fact that
+# sxiv takes no file name arguments for the first image, just the number. Copy
+# this file somewhere into your $PATH and add this at the top of rifle.conf:
+#
+# mime ^image, has sxiv, X, flag f = path/to/this/script -- "$@"
+#
+# Implementation notes: this script is quite slow because of POSIX limitations
+# and portability concerns. First calling the shell function 'abspath' is
+# quicker than calling 'realpath' because it would fork a whole process, which
+# is slow. Second, we need to append a file list to sxiv, which can only be done
+# properly in two ways: arrays (which are not POSIX) or \0 sperated
+# strings. Unfortunately, assigning \0 to a variable is not POSIX either (will
+# not work in dash and others), so we cannot store the result of listfiles to a
+# variable.
+
+if [ $# -eq 0 ]; then
+ echo "Usage: ${0##*/} PICTURES"
+ exit
+fi
+
+[ "$1" = '--' ] && shift
+
+abspath () {
+ case "$1" in
+ /*) printf "%s\n" "$1";;
+ *) printf "%s\n" "$PWD/$1";;
+ esac
+}
+
+listfiles () {
+ find -L "$(dirname "$target")" -maxdepth 1 -type f -iregex \
+ '.*\(jpe?g\|bmp\|png\|gif\)$' -print0 | sort -z
+}
+
+target="$(abspath "$1")"
+count="$(listfiles | grep -m 1 -ZznF "$target" | cut -d: -f1)"
+
+if [ -n "$count" ]; then
+ listfiles | xargs -0 sxiv -n "$count" --
+else
+ sxiv -- "$@" # fallback
+fi
diff --git a/dotfiles/.local/bin/texclear b/dotfiles/.local/bin/texclear
new file mode 100755
index 0000000..6ead810
--- /dev/null
+++ b/dotfiles/.local/bin/texclear
@@ -0,0 +1,13 @@
+#!/usr/bin/env sh
+
+# Clears the build files of a LaTeX/XeLaTeX build.
+# I have vim run this file whenever I exit a .tex file.
+
+case "$1" in
+ *.tex)
+ file=$(readlink -f "$1")
+ dir=$(dirname "$file")
+ base="${file%.*}"
+ find "$dir" -maxdepth 1 -type f -regextype gnu-awk -regex "^$base\\.(4tc|xref|tmp|pyc|pyo|fls|vrb|fdb_latexmk|bak|swp|aux|log|synctex\\(busy\\)|lof|lot|maf|idx|mtc|mtc0|nav|out|snm|toc|bcf|run\\.xml|synctex\\.gz|blg|bbl)" -delete ;;
+ *) printf "Give .tex file as argument.\\n" ;;
+esac
diff --git a/dotfiles/.local/bin/tlauncher b/dotfiles/.local/bin/tlauncher
new file mode 100755
index 0000000..3699794
--- /dev/null
+++ b/dotfiles/.local/bin/tlauncher
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+java -jar /opt/tlauncher/tlauncher.jar
diff --git a/dotfiles/.local/bin/vifm_launch b/dotfiles/.local/bin/vifm_launch
new file mode 100755
index 0000000..07b6473
--- /dev/null
+++ b/dotfiles/.local/bin/vifm_launch
@@ -0,0 +1,15 @@
+#!/bin/sh
+export FIFO_UEBERZUG="/tmp/vifm-ueberzug-${PPID}"
+
+function cleanup {
+ rm "$FIFO_UEBERZUG" 2>/dev/null
+ pkill -P $$ 2>/dev/null
+}
+
+rm "$FIFO_UEBERZUG" 2>/dev/null
+mkfifo "$FIFO_UEBERZUG"
+trap cleanup EXIT
+tail --follow "$FIFO_UEBERZUG" | ueberzug layer --silent --parser bash &
+
+vifm
+cleanup
diff --git a/dotfiles/.local/bin/waybar_launch b/dotfiles/.local/bin/waybar_launch
new file mode 100755
index 0000000..6fc9200
--- /dev/null
+++ b/dotfiles/.local/bin/waybar_launch
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+# Terminate already running bar instance
+killall -q waybar
+
+# Wait until the processes have been shut down
+while pgrep -u $UID -x waybar >/dev/null; do sleep 1; done
+
+waybar
diff --git a/dotfiles/.local/bin/xway b/dotfiles/.local/bin/xway
new file mode 100755
index 0000000..a6008c6
--- /dev/null
+++ b/dotfiles/.local/bin/xway
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# Certain Xorg apps require certain env variable to correctly work through xwayland
+
+export GDK_BACKEND=x11
+export EGL_PLATFORM=x11
+export CLUTTER_PLATFORM=x11
+export SDL_VIDEODRIVER=x11
+export QT_QPA_PLATFORM=xcb
+
+$1