From b275593ce8e1ea60947cc08ef6a5c70f969cb3cd Mon Sep 17 00:00:00 2001 From: Yaroslav Date: Thu, 6 Aug 2020 23:19:13 +0300 Subject: pulseaudio user configuration files Added configuration files for pulseaudio to disable the annoying default behaviour of pulseaudio of remembering the previous sink for programs even after changing the outputs, which results in me having to change my output everytime I launch a program that was open in the previous output but that wasn't open when I changed the default sink. The line that changes the default behaviour is: load-module module-stream-restore restore_device=false in file ~/.config/pulse/default.pa --- dotfiles/.config/pulse/client.conf | 36 ++++++++++ dotfiles/.config/pulse/daemon.conf | 90 +++++++++++++++++++++++ dotfiles/.config/pulse/default.pa | 142 +++++++++++++++++++++++++++++++++++++ dotfiles/.config/pulse/system.pa | 57 +++++++++++++++ 4 files changed, 325 insertions(+) create mode 100644 dotfiles/.config/pulse/client.conf create mode 100644 dotfiles/.config/pulse/daemon.conf create mode 100644 dotfiles/.config/pulse/default.pa create mode 100644 dotfiles/.config/pulse/system.pa (limited to 'dotfiles/.config/pulse') diff --git a/dotfiles/.config/pulse/client.conf b/dotfiles/.config/pulse/client.conf new file mode 100644 index 0000000..cce2d2e --- /dev/null +++ b/dotfiles/.config/pulse/client.conf @@ -0,0 +1,36 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +## Configuration file for PulseAudio clients. See pulse-client.conf(5) for +## more information. Default values are commented out. Use either ; or # for +## commenting. + +; default-sink = +; default-source = +; default-server = +; default-dbus-server = + +autospawn = yes +; autospawn = yes +; daemon-binary = /usr/bin/pulseaudio +; extra-arguments = --log-target=syslog + +; cookie-file = + +; enable-shm = yes +; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB + +; auto-connect-localhost = no +; auto-connect-display = no diff --git a/dotfiles/.config/pulse/daemon.conf b/dotfiles/.config/pulse/daemon.conf new file mode 100644 index 0000000..9d6144d --- /dev/null +++ b/dotfiles/.config/pulse/daemon.conf @@ -0,0 +1,90 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for +## more information. Default values are commented out. Use either ; or # for +## commenting. + +; daemonize = no +; fail = yes +; allow-module-loading = yes +; allow-exit = yes +; use-pid-file = yes +; system-instance = no +; local-server-type = user +; enable-shm = yes +; enable-memfd = yes +; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB +; lock-memory = no +; cpu-limit = no + +; high-priority = yes +; nice-level = -11 + +; realtime-scheduling = yes +; realtime-priority = 5 + +; exit-idle-time = 20 +; scache-idle-time = 20 + +; dl-search-path = (depends on architecture) + +; load-default-script-file = yes +; default-script-file = /etc/pulse/default.pa + +; log-target = auto +; log-level = notice +; log-meta = no +; log-time = no +; log-backtrace = 0 + +; resample-method = speex-float-1 +; avoid-resampling = false +; enable-remixing = yes +; remixing-use-all-sink-channels = yes +; enable-lfe-remixing = no +; lfe-crossover-freq = 0 + +flat-volumes = no +; flat-volumes = yes + +; rlimit-fsize = -1 +; rlimit-data = -1 +; rlimit-stack = -1 +; rlimit-core = -1 +; rlimit-as = -1 +; rlimit-rss = -1 +; rlimit-nproc = -1 +; rlimit-nofile = 256 +; rlimit-memlock = -1 +; rlimit-locks = -1 +; rlimit-sigpending = -1 +; rlimit-msgqueue = -1 +; rlimit-nice = 31 +; rlimit-rtprio = 9 +; rlimit-rttime = 200000 + +; default-sample-format = s16le +; default-sample-rate = 44100 +; alternate-sample-rate = 48000 +; default-sample-channels = 2 +; default-channel-map = front-left,front-right + +; default-fragments = 4 +; default-fragment-size-msec = 25 + +; enable-deferred-volume = yes +; deferred-volume-safety-margin-usec = 8000 +; deferred-volume-extra-delay-usec = 0 diff --git a/dotfiles/.config/pulse/default.pa b/dotfiles/.config/pulse/default.pa new file mode 100644 index 0000000..72ca39b --- /dev/null +++ b/dotfiles/.config/pulse/default.pa @@ -0,0 +1,142 @@ +#!/usr/bin/pulseaudio -nF +# +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +# This startup script is used only if PulseAudio is started per-user +# (i.e. not in system mode) + +.fail + +### Automatically restore the volume of streams and devices +load-module module-device-restore +load-module module-stream-restore restore_device=false +load-module module-card-restore + +### Automatically augment property information from .desktop files +### stored in /usr/share/application +load-module module-augment-properties + +### Should be after module-*-restore but before module-*-detect +load-module module-switch-on-port-available + +### Load audio drivers statically +### (it's probably better to not load these drivers manually, but instead +### use module-udev-detect -- see below -- for doing this automatically) +#load-module module-alsa-sink +#load-module module-alsa-source device=hw:1,0 +#load-module module-oss device="/dev/dsp" sink_name=output source_name=input +#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input +#load-module module-null-sink +#load-module module-pipe-sink + +### Automatically load driver modules depending on the hardware available +.ifexists module-udev-detect.so +load-module module-udev-detect +.else +### Use the static hardware detection module (for systems that lack udev support) +load-module module-detect +.endif + +### Automatically connect sink and source if JACK server is present +.ifexists module-jackdbus-detect.so +.nofail +load-module module-jackdbus-detect channels=2 +.fail +.endif + +### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-policy.so +load-module module-bluetooth-policy +.endif + +.ifexists module-bluetooth-discover.so +load-module module-bluetooth-discover +.endif + +### Load several protocols +load-module module-dbus-protocol +.ifexists module-esound-protocol-unix.so +load-module module-esound-protocol-unix +.endif +load-module module-native-protocol-unix + +### Network access (may be configured with paprefs, so leave this commented +### here if you plan to use paprefs) +#load-module module-esound-protocol-tcp +#load-module module-native-protocol-tcp +#load-module module-zeroconf-publish + +### Load the RTP receiver module (also configured via paprefs, see above) +#load-module module-rtp-recv + +### Load the RTP sender module (also configured via paprefs, see above) +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" +#load-module module-rtp-send source=rtp.monitor + +### Load additional modules from GSettings. This can be configured with the paprefs tool. +### Please keep in mind that the modules configured by paprefs might conflict with manually +### loaded modules. +.ifexists module-gsettings.so +.nofail +load-module module-gsettings +.fail +.endif + + +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value +load-module module-default-device-restore + +### Automatically move streams to the default sink if the sink they are +### connected to dies, similar for sources +load-module module-rescue-streams + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Honour intended role device property +load-module module-intended-roles + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle + +### If autoexit on idle is enabled we want to make sure we only quit +### when no local session needs us anymore. +.ifexists module-console-kit.so +load-module module-console-kit +.endif +.ifexists module-systemd-login.so +load-module module-systemd-login +.endif + +### Enable positioned event sounds +load-module module-position-event-sounds + +### Cork music/video streams when a phone stream is active +load-module module-role-cork + +### Modules to allow autoloading of filters (such as echo cancellation) +### on demand. module-filter-heuristics tries to determine what filters +### make sense, and module-filter-apply does the heavy-lifting of +### loading modules and rerouting streams. +load-module module-filter-heuristics +load-module module-filter-apply + +### Make some devices default +#set-default-sink output +#set-default-source input diff --git a/dotfiles/.config/pulse/system.pa b/dotfiles/.config/pulse/system.pa new file mode 100644 index 0000000..68f108e --- /dev/null +++ b/dotfiles/.config/pulse/system.pa @@ -0,0 +1,57 @@ +#!/usr/bin/pulseaudio -nF +# +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +# This startup script is used only if PulseAudio is started in system +# mode. + +### Automatically restore the volume of streams and devices +load-module module-device-restore +load-module module-stream-restore +load-module module-card-restore + +### Automatically load driver modules depending on the hardware available +.ifexists module-udev-detect.so +load-module module-udev-detect +.else +### Use the static hardware detection module (for systems that lack udev/hal support) +load-module module-detect +.endif + +### Load several protocols +.ifexists module-esound-protocol-unix.so +load-module module-esound-protocol-unix +.endif +load-module module-native-protocol-unix + +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value +load-module module-default-device-restore + +### Automatically move streams to the default sink if the sink they are +### connected to dies, similar for sources +load-module module-rescue-streams + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle + +### Enable positioned event sounds +load-module module-position-event-sounds -- cgit v1.2.3