From 5eee5b44924bf9079a67d5bc7612bfad56ddeed3 Mon Sep 17 00:00:00 2001
From: Yaroslav <contact@yaroslavps.com>
Date: Fri, 17 Jan 2020 19:14:34 +0300
Subject: config restructuring and cleanup

---
 dotfiles/.scripts/qmi_setup | 104 --------------------------------------------
 1 file changed, 104 deletions(-)
 delete mode 100755 dotfiles/.scripts/qmi_setup

(limited to 'dotfiles/.scripts/qmi_setup')

diff --git a/dotfiles/.scripts/qmi_setup b/dotfiles/.scripts/qmi_setup
deleted file mode 100755
index 62fcc82..0000000
--- a/dotfiles/.scripts/qmi_setup
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-
-###
-# This script automate the setup of QMI supported wwan devices.
-#
-# Tested on following environment:
-#   * Lenovo ThinkPad X220 (4286-CTO)
-#   * Gentoo/Linux, Linux Kernel 3.9.6
-#   * NTT Docomo UIM card (Xi LTE SIM)
-#   * Sierra Wireless, Inc. Gobi 3000 wireless wan module
-#     (FRU 60Y3257, vendor and device id is 1199:9013)
-#     memo:
-#       I recommend to check if your wwan module works fine
-#       for your mobile broadband provider with Windows
-#       especially if you imported the device from other country.
-#       You may have to initialize your device for your region.
-#   * Required kernel config (other modules may be also required):
-#     - qmi_wwan (CONFIG_USB_NET_QMI_WWAN)
-#     - qcserial (CONFIG_USB_SERIAL_QUALCOMM)
-#   * Required settings:
-#     - you may have to create /etc/qmi-network.conf.
-#       My qmi-network.conf has only a line "APN=mopera.net".
-#
-
-# your wwan device name created by qmi_wwan kernel module
-# check it with "ip a" or "ifconfig -a". it may be wwan0?
-WWAN_DEV=wwp0s20f0u6
-# your cdc_wdm modem location
-CDC_WDM=/dev/cdc-wdm0
-# this script uses following qmi commands
-QMICLI=/usr/bin/qmicli
-QMI_NETWORK=/usr/bin/qmi-network
-# the places of following commands vary depending on your distribution
-IFCONFIG=/usr/bin/ifconfig
-DHCPCD=/usr/bin/dhcpcd
-SUDO=/usr/bin/sudo
-
-function helpmsg {
-    echo "usage: $0 {start|stop|restart|status}"
-    exit 1
-}
-
-function qmi_start {
-    $COMMAND_PREFIX $IFCONFIG $WWAN_DEV up
-    $COMMAND_PREFIX $QMICLI -d $CDC_WDM --dms-set-operating-mode=online
-    if [ $? -ne 0 ]; then
-	echo "your wwan device may be RFKilled?"
-	exit 1
-    fi
-    $COMMAND_PREFIX $QMI_NETWORK $CDC_WDM start
-    $COMMAND_PREFIX $DHCPCD $WWAN_DEV
-}
-
-function qmi_stop {
-    $COMMAND_PREFIX $QMI_NETWORK $CDC_WDM stop
-    $COMMAND_PREFIX kill `cat /var/run/dhcpcd-${WWAN_DEV}.pid`
-    $COMMAND_PREFIX $IFCONFIG $WWAN_DEV down
-}
-
-function qmi_strength {
-    dbm=`$COMMAND_PREFIX $QMICLI -d $CDC_WDM --nas-get-signal-strength | tr "'" " " | grep Network | head -1 | awk '{print $4}'`
-    echo -n "Signal strength is "
-    if [ $dbm -ge -73 ]; then
-	echo -n 'Excellent'
-    elif [ $dbm -ge -83 ]; then
-	echo -n 'Good'
-    elif [ $dbm -ge -93 ]; then
-	echo -n 'OK'
-    elif [ $dbm -ge -109 ]; then
-	echo -n 'Marginal'
-    else
-	echo Unknown
-    fi
-    echo " (${dbm} dBm)"
-}
-
-function qmi_status {
-    $COMMAND_PREFIX $QMI_NETWORK $CDC_WDM status
-    qmi_strength
-}
-
-# check argument number
-if [ $# -ne 1 ]
-then
-    helpmsg
-fi
-
-# check permission
-if [ `whoami` != 'root' ]
-then
-    echo "warning: root permission required. setting command prefix to 'sudo'."
-    COMMAND_PREFIX=$SUDO
-fi
-
-# run commands
-case $1 in
-    start) qmi_start ;;
-    stop) qmi_stop ;;
-    restart) qmi_stop; qmi_start ;;
-    status) qmi_status ;;
-    *) helpmsg ;;
-esac
-
-
-- 
cgit v1.2.3