diff options
Diffstat (limited to 'dotfiles/.local/share/nvim/site/plugin')
| -rw-r--r-- | dotfiles/.local/share/nvim/site/plugin/airline.vim | 208 | ||||
| -rw-r--r-- | dotfiles/.local/share/nvim/site/plugin/dragvisuals.vim | 345 | ||||
| -rw-r--r-- | dotfiles/.local/share/nvim/site/plugin/gnupg.vim | 1287 | ||||
| -rw-r--r-- | dotfiles/.local/share/nvim/site/plugin/latexlivepreview.vim | 276 | ||||
| -rw-r--r-- | dotfiles/.local/share/nvim/site/plugin/neomake.vim | 50 | ||||
| -rw-r--r-- | dotfiles/.local/share/nvim/site/plugin/node.vim | 47 | ||||
| -rw-r--r-- | dotfiles/.local/share/nvim/site/plugin/vmath.vim | 152 |
7 files changed, 0 insertions, 2365 deletions
diff --git a/dotfiles/.local/share/nvim/site/plugin/airline.vim b/dotfiles/.local/share/nvim/site/plugin/airline.vim deleted file mode 100644 index c91ff20..0000000 --- a/dotfiles/.local/share/nvim/site/plugin/airline.vim +++ /dev/null @@ -1,208 +0,0 @@ -" MIT License. Copyright (c) 2013-2018 Bailey Ling et al. -" vim: et ts=2 sts=2 sw=2 - -scriptencoding utf-8 - -if &cp || v:version < 702 || (exists('g:loaded_airline') && g:loaded_airline) - finish -endif -let g:loaded_airline = 1 - -let s:airline_initialized = 0 -function! s:init() - if s:airline_initialized - return - endif - let s:airline_initialized = 1 - - call airline#extensions#load() - call airline#init#sections() - - let s:theme_in_vimrc = exists('g:airline_theme') - if s:theme_in_vimrc - try - let palette = g:airline#themes#{g:airline_theme}#palette - catch - call airline#util#warning(printf('Could not resolve airline theme "%s". Themes have been migrated to github.com/vim-airline/vim-airline-themes.', g:airline_theme)) - let g:airline_theme = 'dark' - endtry - silent call airline#switch_theme(g:airline_theme) - else - let g:airline_theme = 'dark' - silent call s:on_colorscheme_changed() - endif - - call airline#util#doautocmd('AirlineAfterInit') -endfunction - -let s:active_winnr = -1 -function! s:on_window_changed() - let s:active_winnr = winnr() - - if pumvisible() && (!&previewwindow || g:airline_exclude_preview) - return - endif - " Handle each window only once, since we might come here several times for - " different autocommands. - let l:key = [bufnr('%'), s:active_winnr, winnr('$'), tabpagenr(), &ft] - if get(g:, 'airline_last_window_changed', []) == l:key - \ && &stl is# '%!airline#statusline('.s:active_winnr.')' - \ && &ft !~? 'gitcommit' - " fugitive is special, it changes names and filetypes several times, - " make sure the caching does not get into its way - return - endif - let g:airline_last_window_changed = l:key - call s:init() - call airline#update_statusline() -endfunction - -function! s:on_colorscheme_changed() - call s:init() - unlet! g:airline#highlighter#normal_fg_hi - call airline#highlighter#reset_hlcache() - let g:airline_gui_mode = airline#init#gui_mode() - if !s:theme_in_vimrc - call airline#switch_matching_theme() - endif - - " couldn't find a match, or theme was defined, just refresh - call airline#load_theme() -endfunction - -function! airline#cmdwinenter(...) - call airline#extensions#apply_left_override('Command Line', '') -endfunction - -function! s:airline_toggle() - if exists("#airline") - augroup airline - au! - augroup END - augroup! airline - - if exists("s:stl") - let &stl = s:stl - endif - call airline#highlighter#reset_hlcache() - - call airline#util#doautocmd('AirlineToggledOff') - else - let s:stl = &statusline - augroup airline - autocmd! - - autocmd CmdwinEnter * - \ call airline#add_statusline_func('airline#cmdwinenter') - \ | call <sid>on_window_changed() - autocmd CmdwinLeave * call airline#remove_statusline_func('airline#cmdwinenter') - - autocmd GUIEnter,ColorScheme * call <sid>on_colorscheme_changed() - if exists("##OptionSet") - " Make sure that g_airline_gui_mode is refreshed - autocmd OptionSet termguicolors call <sid>on_colorscheme_changed() - endif - " Set all statuslines to inactive - autocmd FocusLost * call airline#update_statusline_focuslost() - " Refresh airline for :syntax off - autocmd SourcePre */syntax/syntax.vim - \ call airline#extensions#tabline#buffers#invalidate() - autocmd VimEnter,WinEnter,BufWinEnter,FileType,BufUnload * - \ call <sid>on_window_changed() - if exists('##CompleteDone') - autocmd CompleteDone * call <sid>on_window_changed() - endif - " non-trivial number of external plugins use eventignore=all, so we need to account for that - autocmd CursorMoved * - \ if winnr() != s:active_winnr - \ | call <sid>on_window_changed() - \ | endif - - autocmd VimResized * unlet! w:airline_lastmode | :call <sid>airline_refresh() - if exists('*timer_start') && exists('*funcref') - " do not trigger FocusGained on startup, it might erase the intro screen (see #1817) - " needs funcref() (needs 7.4.2137) and timers (7.4.1578) - let Handler=funcref('<sid>FocusGainedHandler') - let s:timer=timer_start(5000, Handler) - else - autocmd FocusGained * unlet! w:airline_lastmode | :call <sid>airline_refresh() - endif - - if exists("##TerminalOpen") - " Using the same function with the TermOpen autocommand - " breaks for Neovim see #1828, looks like a neovim bug. - autocmd TerminalOpen * :call airline#load_theme() " reload current theme for Terminal, forces the terminal extension to be loaded - endif - autocmd TabEnter * :unlet! w:airline_lastmode | let w:airline_active=1 - autocmd BufWritePost */autoload/airline/themes/*.vim - \ exec 'source '.split(globpath(&rtp, 'autoload/airline/themes/'.g:airline_theme.'.vim', 1), "\n")[0] - \ | call airline#load_theme() - augroup END - - if &laststatus < 2 - set laststatus=2 - endif - if s:airline_initialized - call s:on_window_changed() - endif - - call airline#util#doautocmd('AirlineToggledOn') - endif -endfunction - -function! s:get_airline_themes(a, l, p) - return airline#util#themes(a:a) -endfunction - -function! s:airline_theme(...) - if a:0 - try - call airline#switch_theme(a:1) - catch " discard error - endtry - else - echo g:airline_theme - endif -endfunction - -function! s:airline_refresh() - if !exists("#airline") - " disabled - return - endif - call airline#util#doautocmd('AirlineBeforeRefresh') - call airline#highlighter#reset_hlcache() - call airline#load_theme() - call airline#update_statusline() -endfunction - -function! s:FocusGainedHandler(timer) - if exists("s:timer") && a:timer == s:timer - augroup airline - au FocusGained * unlet! w:airline_lastmode | :call <sid>airline_refresh() - augroup END - endif -endfu - -function! s:airline_extensions() - let loaded = airline#extensions#get_loaded_extensions() - let files = split(globpath(&rtp, "autoload/airline/extensions/*.vim"), "\n") - call map(files, 'fnamemodify(v:val, ":t:r")') - if !empty(files) - echohl Title - echo printf("%-15s\t%s", "Extension", "Status") - echohl Normal - endif - for ext in sort(files) - echo printf("%-15s\t%sloaded", ext, (index(loaded, ext) == -1 ? 'not ' : '')) - endfor -endfunction - -command! -bar -nargs=? -complete=customlist,<sid>get_airline_themes AirlineTheme call <sid>airline_theme(<f-args>) -command! -bar AirlineToggleWhitespace call airline#extensions#whitespace#toggle() -command! -bar AirlineToggle call s:airline_toggle() -command! -bar AirlineRefresh call s:airline_refresh() -command! AirlineExtensions call s:airline_extensions() - -call airline#init#bootstrap() -call s:airline_toggle() diff --git a/dotfiles/.local/share/nvim/site/plugin/dragvisuals.vim b/dotfiles/.local/share/nvim/site/plugin/dragvisuals.vim deleted file mode 100644 index 12c4f5d..0000000 --- a/dotfiles/.local/share/nvim/site/plugin/dragvisuals.vim +++ /dev/null @@ -1,345 +0,0 @@ -" Vim global plugin for dragging virtual blocks -" Last change: Tue Jul 24 07:19:35 EST 2012 -" Maintainer: Damian Conway -" License: This file is placed in the public domain. - -"######################################################################### -"## ## -"## Add the following (uncommented) to your .vimrc... ## -"## ## -"## runtime plugin/dragvisuals.vim ## -"## ## -"## vmap <expr> <LEFT> DVB_Drag('left') ## -"## vmap <expr> <RIGHT> DVB_Drag('right') ## -"## vmap <expr> <DOWN> DVB_Drag('down') ## -"## vmap <expr> <UP> DVB_Drag('up') ## -"## vmap <expr> D DVB_Duplicate() ## -"## ## -"## " Remove any introduced trailing whitespace after moving... ## -"## let g:DVB_TrimWS = 1 ## -"## ## -"## Or, if you use the arrow keys for normal motions, choose ## -"## four other keys for block dragging. For example: ## -"## ## -"## vmap <expr> h DVB_Drag('left') ## -"## vmap <expr> l DVB_Drag('right') ## -"## vmap <expr> j DVB_Drag('down') ## -"## vmap <expr> k DVB_Drag('up') ## -"## ## -"## Or: ## -"## ## -"## vmap <expr> <S-LEFT> DVB_Drag('left') ## -"## vmap <expr> <S-RIGHT> DVB_Drag('right') ## -"## vmap <expr> <S-DOWN> DVB_Drag('down') ## -"## vmap <expr> <S-UP> DVB_Drag('up') ## -"## ## -"## Or even: ## -"## ## -"## vmap <expr> <LEFT><LEFT> DVB_Drag('left') ## -"## vmap <expr> <RIGHT><RIGHT> DVB_Drag('right') ## -"## vmap <expr> <DOWN><DOWN> DVB_Drag('down') ## -"## vmap <expr> <UP><UP> DVB_Drag('up') ## -"## ## -"######################################################################### - - -" If already loaded, we're done... -if exists("loaded_dragvirtualblocks") - finish -endif -let loaded_dragvirtualblocks = 1 - -" Preserve external compatibility options, then enable full vim compatibility... -let s:save_cpo = &cpo -set cpo&vim - -"====[ Implementation ]==================================== - -" Toggle this to stop trimming on drags... -if !exists('g:DVB_TrimWS') - let g:DVB_TrimWS = 1 -endif - -function! DVB_Drag (dir) - " No-op in Visual mode... - if mode() ==# 'v' - return "\<ESC>gv" - - " Do Visual Line drag indirectly via temporary nmap - " (to ensure we have access to block position data)... - elseif mode() ==# 'V' - " Set up a temporary convenience... - exec "nnoremap <silent><expr><buffer> M \<SID>Drag_Lines('".a:dir."')" - - " Return instructions to implement the move and reset selection... - return '"vyM' - - " Otherwise do Visual Block drag indirectly via temporary nmap - " (to ensure we have access to block position data)... - else - " Set up a temporary convenience... - exec "nnoremap <silent><expr><buffer> M \<SID>Drag_Block('".a:dir."')" - - " Return instructions to implement the move and reset selection... - return '"vyM' - endif -endfunction - -" Duplicate selected block and place to the right... -function! DVB_Duplicate () - exec "nnoremap <silent><expr><buffer> M \<SID>DuplicateBlock()" - return '"vyM' -endfunction - -function! s:DuplicateBlock () - nunmap <buffer> M - " Locate block boundaries... - let [buf_left, line_left, col_left, offset_left ] = getpos("'<") - let [buf_right, line_right, col_right, offset_right] = getpos("'>") - - " Identify special '$' blocks... - let dollar_block = 0 - let start_col = min([col_left+offset_left, col_right+offset_right]) - let end_col = max([col_left+offset_left, col_right+offset_right]) - let visual_width = end_col - start_col + 1 - for visual_line in split(getreg("v"),"\n") - if strlen(visual_line) > visual_width - let dollar_block = 1 - let visual_width = strlen(visual_line) - endif - endfor - let square_up = (dollar_block ? (start_col+visual_width-2).'|' : '') - - set virtualedit=all - return 'gv'.square_up.'yPgv' - \. (visual_width-dollar_block) . 'lo' . (visual_width-dollar_block) . 'l' - \. "y:set virtualedit=block\<CR>gv" - \. (dollar_block ? 'o$' : '') -endfunction - - -" Kludge to hide change reporting inside implementation... -let s:NO_REPORT = ":let b:DVB_report=&report\<CR>:let &report=1000000000\<CR>" -let s:PREV_REPORT = ":let &report = b:DVB_report\<CR>" - - -" Drag in specified direction in Visual Line mode... -function! s:Drag_Lines (dir) - " Clean up the temporary convenience... - nunmap <buffer> M - - " Locate block being shifted... - let [buf_left, line_left, col_left, offset_left ] = getpos("'<") - let [buf_right, line_right, col_right, offset_right] = getpos("'>") - - " Drag entire lines left if possible... - if a:dir == 'left' - " Are all lines indented at least one space??? - let lines = getline(line_left, line_right) - let all_indented = match(lines, '^[^ ]') == -1 - nohlsearch - - " If can't trim one space from start of each line, be a no-op... - if !all_indented - return 'gv' - - " Otherwise drag left by removing one space from start of each line... - else - return s:NO_REPORT - \ . "gv:s/^ //\<CR>" - \ . s:PREV_REPORT - \ . "gv" - endif - - " To drag entire lines right, add a space in column 1... - elseif a:dir == 'right' - return s:NO_REPORT - \ . "gv:s/^/ /\<CR>:nohlsearch\<CR>" - \ . s:PREV_REPORT - \ . "gv" - - " To drag entire lines upwards... - elseif a:dir == 'up' - let EOF = line('$') - - " Can't drag up if at first line... - if line_left == 1 || line_right == 1 - return 'gv' - - " Needs special handling at EOF (because cursor moves up on delete)... - elseif line_left == EOF || line_right == EOF - let height = line_right - line_left - let select_extra = height ? height . 'j' : "" - return s:NO_REPORT - \ . 'gvxP' - \ . s:PREV_REPORT - \ . 'V' . select_extra - - " Otherwise just cut-move-paste-reselect... - else - let height = line_right - line_left - let select_extra = height ? height . 'j' : "" - return s:NO_REPORT - \ . 'gvxkP' - \ . s:PREV_REPORT - \ . 'V' . select_extra - endif - - " To drag entire lines downwards... - elseif a:dir == 'down' - let EOF = line('$') - - " This is how much extra we're going to have to reselect... - let height = line_right - line_left - let select_extra = height ? height . 'j' : "" - - " Needs special handling at EOF (to push selection down into new space)... - if line_left == EOF || line_right == EOF - return "O\<ESC>gv" - - " Otherwise, just cut-move-paste-reselect... - else - return s:NO_REPORT - \ . 'gvxp' - \ . s:PREV_REPORT - \ . 'V' . select_extra - endif - - endif -endfunction - -" Drag in specified direction in Visual Block mode... -function! s:Drag_Block (dir) - " Clean up the temporary convenience... - nunmap <buffer> M - - " Locate block being shifted... - let [buf_left, line_left, col_left, offset_left ] = getpos("'<") - let [buf_right, line_right, col_right, offset_right] = getpos("'>") - - " Identify special '$' blocks... - let dollar_block = 0 - let start_col = min([col_left+offset_left, col_right+offset_right]) - let end_col = max([col_left+offset_left, col_right+offset_right]) - let visual_width = end_col - start_col + 1 - for visual_line in split(getreg("v"),"\n") - if strlen(visual_line) > visual_width - let dollar_block = 1 - let visual_width = strlen(visual_line) - endif - endfor - let square_up = (dollar_block ? (start_col+visual_width-2).'|' : '') - - " Drag left... - if a:dir == 'left' - "Can't drag left at left margin... - if col_left == 1 || col_right == 1 - return 'gv' - - " Otherwise reposition one column left (and optionally trim any whitespace)... - elseif g:DVB_TrimWS - " May need to be able to temporarily step past EOL... - let prev_ve = &virtualedit - set virtualedit=all - - " Are we moving past other text??? - let square_up_final = "" - if dollar_block - let lines = getline(line_left, line_right) - if match(lines, '^.\{'.(start_col-2).'}\S') >= 0 - let dollar_block = 0 - let square_up_final = (start_col+visual_width-3).'|' - endif - endif - - let vcol = start_col - 2 - return 'gv'.square_up.'xhP' - \ . s:NO_REPORT - \ . "gvhoho:s/\\s*$//\<CR>gv\<ESC>" - \ . ':set virtualedit=' . prev_ve . "\<CR>" - \ . s:PREV_REPORT - \ . ":nohlsearch\<CR>gv" - \ . (dollar_block ? '$' : square_up_final ) - else - return 'gv'.square_up.'xhPgvhoho' - endif - - " Drag right... - elseif a:dir == 'right' - " May need to be able to temporarily step past EOL... - let prev_ve = &virtualedit - set virtualedit=all - - " Reposition block one column to the right... - if g:DVB_TrimWS - let vcol = start_col - return 'gv'.square_up.'xp' - \ . s:NO_REPORT - \ . "gvlolo" - \ . ":s/\\s*$//\<CR>gv\<ESC>" - \ . ':set virtualedit=' . prev_ve . "\<CR>" - \ . s:PREV_REPORT - \ . (dollar_block ? 'gv$' : 'gv') - else - return 'gv'.square_up.'xp:set virtualedit=' . prev_ve . "\<CR>gvlolo" - endif - - " Drag upwards... - elseif a:dir == 'up' - " Can't drag upwards at top margin... - if line_left == 1 || line_right == 1 - return 'gv' - endif - - " May need to be able to temporarily step past EOL... - let prev_ve = &virtualedit - set virtualedit=all - - " If trimming whitespace, jump to just below block to do it... - if g:DVB_TrimWS - let height = line_right - line_left + 1 - return 'gv'.square_up.'xkPgvkoko"vy' - \ . height - \ . 'j:s/\s*$//' - \ . "\<CR>:nohlsearch\<CR>:set virtualedit=" - \ . prev_ve - \ . "\<CR>gv" - \ . (dollar_block ? '$' : '') - - " Otherwise just move and reselect... - else - return 'gv'.square_up.'xkPgvkoko"vy:set virtualedit=' - \ . prev_ve - \ . "\<CR>gv" - \ . (dollar_block ? '$' : '') - endif - - " Drag downwards... - elseif a:dir == 'down' - " May need to be able to temporarily step past EOL... - let prev_ve = &virtualedit - set virtualedit=all - - " If trimming whitespace, move to just above block to do it... - if g:DVB_TrimWS - return 'gv'.square_up.'xjPgvjojo"vyk:s/\s*$//' - \ . "\<CR>:nohlsearch\<CR>:set virtualedit=" - \ . prev_ve - \ . "\<CR>gv" - \ . (dollar_block ? '$' : '') - - " Otherwise just move and reselect... - else - return 'gv'.square_up.'xjPgvjojo"vy' - \ . "\<CR>:set virtualedit=" - \ . prev_ve - \ . "\<CR>gv" - \ . (dollar_block ? '$' : '') - endif - endif -endfunction - - -" Restore previous external compatibility options -let &cpo = s:save_cpo - diff --git a/dotfiles/.local/share/nvim/site/plugin/gnupg.vim b/dotfiles/.local/share/nvim/site/plugin/gnupg.vim deleted file mode 100644 index 97539c5..0000000 --- a/dotfiles/.local/share/nvim/site/plugin/gnupg.vim +++ /dev/null @@ -1,1287 +0,0 @@ -" Name: gnupg.vim -" Last Change: 2012 May 31 -" Maintainer: James McCoy <vega.james@gmail.com> -" Original Author: Markus Braun <markus.braun@krawel.de> -" Summary: Vim plugin for transparent editing of gpg encrypted files. -" License: This program is free software; you can redistribute it and/or -" modify it under the terms of the GNU General Public License -" as published by the Free Software Foundation; either version -" 2 of the License, or (at your option) any later version. -" See http://www.gnu.org/copyleft/gpl-2.0.txt -" -" Section: Documentation {{{1 -" -" Description: {{{2 -" -" This script implements transparent editing of gpg encrypted files. The -" filename must have a ".gpg", ".pgp" or ".asc" suffix. When opening such -" a file the content is decrypted, when opening a new file the script will -" ask for the recipients of the encrypted file. The file content will be -" encrypted to all recipients before it is written. The script turns off -" viminfo, swapfile, and undofile to increase security. -" -" Installation: {{{2 -" -" Copy the gnupg.vim file to the $HOME/.vim/plugin directory. -" Refer to ':help add-plugin', ':help add-global-plugin' and ':help -" runtimepath' for more details about Vim plugins. -" -" From "man 1 gpg-agent": -" -" ... -" You should always add the following lines to your .bashrc or whatever -" initialization file is used for all shell invocations: -" -" GPG_TTY=`tty` -" export GPG_TTY -" -" It is important that this environment variable always reflects the out‐ -" put of the tty command. For W32 systems this option is not required. -" ... -" -" Most distributions provide software to ease handling of gpg and gpg-agent. -" Examples are keychain or seahorse. -" -" Commands: {{{2 -" -" :GPGEditRecipients -" Opens a scratch buffer to change the list of recipients. Recipients that -" are unknown (not in your public key) are highlighted and have -" a prepended "!". Closing the buffer makes the changes permanent. -" -" :GPGViewRecipients -" Prints the list of recipients. -" -" :GPGEditOptions -" Opens a scratch buffer to change the options for encryption (symmetric, -" asymmetric, signing). Closing the buffer makes the changes permanent. -" WARNING: There is no check of the entered options, so you need to know -" what you are doing. -" -" :GPGViewOptions -" Prints the list of options. -" -" Variables: {{{2 -" -" g:GPGExecutable -" If set used as gpg executable, otherwise the system chooses what is run -" when "gpg" is called. Defaults to "gpg". -" -" g:GPGUseAgent -" If set to 0 a possible available gpg-agent won't be used. Defaults to 1. -" -" g:GPGPreferSymmetric -" If set to 1 symmetric encryption is preferred for new files. Defaults to 0. -" -" g:GPGPreferArmor -" If set to 1 armored data is preferred for new files. Defaults to 0 -" unless a "*.asc" file is being edited. -" -" g:GPGPreferSign -" If set to 1 signed data is preferred for new files. Defaults to 0. -" -" g:GPGDefaultRecipients -" If set, these recipients are used as defaults when no other recipient is -" defined. This variable is a Vim list. Default is unset. -" -" g:GPGUsePipes -" If set to 1, use pipes instead of temporary files when interacting with -" gnupg. When set to 1, this can cause terminal-based gpg agents to not -" display correctly when prompting for passwords. Defaults to 0. -" -" g:GPGHomedir -" If set, specifies the directory that will be used for GPG's homedir. -" This corresponds to gpg's --homedir option. This variable is a Vim -" string. -" -" Known Issues: {{{2 -" -" In some cases gvim can't decrypt files - -" This is caused by the fact that a running gvim has no TTY and thus gpg is -" not able to ask for the passphrase by itself. This is a problem for Windows -" and Linux versions of gvim and could not be solved unless a "terminal -" emulation" is implemented for gvim. To circumvent this you have to use any -" combination of gpg-agent and a graphical pinentry program: -" -" - gpg-agent only: -" you need to provide the passphrase for the needed key to gpg-agent -" in a terminal before you open files with gvim which require this key. -" -" - pinentry only: -" you will get a popup window every time you open a file that needs to -" be decrypted. -" -" - gpgagent and pinentry: -" you will get a popup window the first time you open a file that -" needs to be decrypted. -" -" Credits: {{{2 -" -" - Mathieu Clabaut for inspirations through his vimspell.vim script. -" - Richard Bronosky for patch to enable ".pgp" suffix. -" - Erik Remmelzwaal for patch to enable windows support and patient beta -" testing. -" - Lars Becker for patch to make gpg2 working. -" - Thomas Arendsen Hein for patch to convert encoding of gpg output. -" - Karl-Heinz Ruskowski for patch to fix unknown recipients and trust model -" and patient beta testing. -" - Giel van Schijndel for patch to get GPG_TTY dynamically. -" - Sebastian Luettich for patch to fix issue with symmetric encryption an set -" recipients. -" - Tim Swast for patch to generate signed files. -" - James Vega for patches for better '*.asc' handling, better filename -" escaping and better handling of multiple keyrings. -" -" Section: Plugin header {{{1 - -" guard against multiple loads {{{2 -if (exists("g:loaded_gnupg") || &cp || exists("#GnuPG")) - finish -endif -let g:loaded_gnupg = '2.5' -let s:GPGInitRun = 0 - -" check for correct vim version {{{2 -if (v:version < 702) - echohl ErrorMsg | echo 'plugin gnupg.vim requires Vim version >= 7.2' | echohl None - finish -endif - -" Section: Autocmd setup {{{1 - -augroup GnuPG - autocmd! - - " do the decryption - autocmd BufReadCmd *.\(gpg\|asc\|pgp\) call s:GPGInit(1) - autocmd BufReadCmd *.\(gpg\|asc\|pgp\) call s:GPGDecrypt(1) - autocmd BufReadCmd *.\(gpg\|asc\|pgp\) call s:GPGBufReadPost() - autocmd FileReadCmd *.\(gpg\|asc\|pgp\) call s:GPGInit(0) - autocmd FileReadCmd *.\(gpg\|asc\|pgp\) call s:GPGDecrypt(0) - - " convert all text to encrypted text before writing - autocmd BufWriteCmd *.\(gpg\|asc\|pgp\) call s:GPGBufWritePre() - autocmd BufWriteCmd,FileWriteCmd *.\(gpg\|asc\|pgp\) call s:GPGInit(0) - autocmd BufWriteCmd,FileWriteCmd *.\(gpg\|asc\|pgp\) call s:GPGEncrypt() - - " cleanup on leaving vim - autocmd VimLeave *.\(gpg\|asc\|pgp\) call s:GPGCleanup() -augroup END - -" Section: Constants {{{1 - -let s:GPGMagicString = "\t \t" -let s:keyPattern = '\%(0x\)\=[[:xdigit:]]\{8,16}' - -" Section: Highlight setup {{{1 - -highlight default link GPGWarning WarningMsg -highlight default link GPGError ErrorMsg -highlight default link GPGHighlightUnknownRecipient ErrorMsg - -" Section: Functions {{{1 - -" Function: s:GPGInit(bufread) {{{2 -" -" initialize the plugin -" The bufread argument specifies whether this was called due to BufReadCmd -" -function s:GPGInit(bufread) - call s:GPGDebug(3, printf(">>>>>>>> Entering s:GPGInit(%d)", a:bufread)) - - " For FileReadCmd, we're reading the contents into another buffer. If that - " buffer is also destined to be encrypted, then these settings will have - " already been set, otherwise don't set them since it limits the - " functionality of the cleartext buffer. - if a:bufread - " we don't want a swap file, as it writes unencrypted data to disk - setl noswapfile - - " if persistent undo is present, disable it for this buffer - if exists('+undofile') - setl noundofile - endif - - " first make sure nothing is written to ~/.viminfo while editing - " an encrypted file. - set viminfo= - endif - - " the rest only has to be run once - if s:GPGInitRun - return - endif - - " check what gpg command to use - if (!exists("g:GPGExecutable")) - let g:GPGExecutable = "gpg --trust-model always" - endif - - " check if gpg-agent is allowed - if (!exists("g:GPGUseAgent")) - let g:GPGUseAgent = 1 - endif - - " check if symmetric encryption is preferred - if (!exists("g:GPGPreferSymmetric")) - let g:GPGPreferSymmetric = 0 - endif - - " check if armored files are preferred - if (!exists("g:GPGPreferArmor")) - " .asc files should be armored as that's what the extension is used for - if expand('<afile>') =~ '\.asc$' - let g:GPGPreferArmor = 1 - else - let g:GPGPreferArmor = 0 - endif - endif - - " check if signed files are preferred - if (!exists("g:GPGPreferSign")) - let g:GPGPreferSign = 0 - endif - - " start with empty default recipients if none is defined so far - if (!exists("g:GPGDefaultRecipients")) - let g:GPGDefaultRecipients = [] - endif - - " prefer not to use pipes since it can garble gpg agent display - if (!exists("g:GPGUsePipes")) - let g:GPGUsePipes = 0 - endif - - " allow alternate gnupg homedir - if (!exists('g:GPGHomedir')) - let g:GPGHomedir = '' - endif - - " print version - call s:GPGDebug(1, "gnupg.vim ". g:loaded_gnupg) - - " determine if gnupg can use the gpg-agent - if (exists("$GPG_AGENT_INFO") && g:GPGUseAgent == 1) - if (!exists("$GPG_TTY") && !has("gui_running")) - let $GPG_TTY = system("tty") - if (v:shell_error) - let $GPG_TTY = "" - echohl GPGError - echom "The GPG_TTY is not set and no TTY could be found using the `tty` command!" - echom "gpg-agent might not work." - echohl None - endif - endif - let s:GPGCommand = g:GPGExecutable . " --use-agent" - else - let s:GPGCommand = g:GPGExecutable . " --no-use-agent" - endif - - " don't use tty in gvim except for windows: we get their a tty for free. - " FIXME find a better way to avoid an error. - " with this solution only --use-agent will work - if (has("gui_running") && !has("gui_win32")) - let s:GPGCommand = s:GPGCommand . " --no-tty" - endif - - " setup shell environment for unix and windows - let s:shellredirsave = &shellredir - let s:shellsave = &shell - let s:shelltempsave = &shelltemp - " noshelltemp isn't currently supported on Windows, but it doesn't cause any - " errors and this future proofs us against requiring changes if Windows - " gains noshelltemp functionality - let s:shelltemp = !g:GPGUsePipes - if (has("unix")) - " unix specific settings - let s:shellredir = ">%s 2>&1" - let s:shell = '/bin/sh' - let s:stderrredirnull = '2>/dev/null' - let s:GPGCommand = "LANG=C LC_ALL=C " . s:GPGCommand - else - " windows specific settings - let s:shellredir = '>%s' - let s:shell = &shell - let s:stderrredirnull = '2>nul' - endif - - call s:GPGDebug(3, "shellredirsave: " . s:shellredirsave) - call s:GPGDebug(3, "shellsave: " . s:shellsave) - call s:GPGDebug(3, "shelltempsave: " . s:shelltempsave) - - call s:GPGDebug(3, "shell: " . s:shell) - call s:GPGDebug(3, "shellcmdflag: " . &shellcmdflag) - call s:GPGDebug(3, "shellxquote: " . &shellxquote) - call s:GPGDebug(3, "shellredir: " . s:shellredir) - call s:GPGDebug(3, "stderrredirnull: " . s:stderrredirnull) - - call s:GPGDebug(3, "shell implementation: " . resolve(s:shell)) - - " find the supported algorithms - let output = s:GPGSystem({ 'level': 2, 'args': '--version' }) - - let s:GPGPubkey = substitute(output, ".*Pubkey: \\(.\\{-}\\)\n.*", "\\1", "") - let s:GPGCipher = substitute(output, ".*Cipher: \\(.\\{-}\\)\n.*", "\\1", "") - let s:GPGHash = substitute(output, ".*Hash: \\(.\\{-}\\)\n.*", "\\1", "") - let s:GPGCompress = substitute(output, ".*Compress.\\{-}: \\(.\\{-}\\)\n.*", "\\1", "") - - call s:GPGDebug(2, "public key algorithms: " . s:GPGPubkey) - call s:GPGDebug(2, "cipher algorithms: " . s:GPGCipher) - call s:GPGDebug(2, "hashing algorithms: " . s:GPGHash) - call s:GPGDebug(2, "compression algorithms: " . s:GPGCompress) - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGInit()") - let s:GPGInitRun = 1 -endfunction - -" Function: s:GPGCleanup() {{{2 -" -" cleanup on leaving vim -" -function s:GPGCleanup() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGCleanup()") - - " wipe out screen - new +only - redraw! - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGCleanup()") -endfunction - -" Function: s:GPGDecrypt(bufread) {{{2 -" -" decrypt the buffer and find all recipients of the encrypted file -" The bufread argument specifies whether this was called due to BufReadCmd -" -function s:GPGDecrypt(bufread) - call s:GPGDebug(3, printf(">>>>>>>> Entering s:GPGDecrypt(%d)", a:bufread)) - - " get the filename of the current buffer - let filename = expand("<afile>:p") - - " clear GPGRecipients and GPGOptions - let b:GPGRecipients = g:GPGDefaultRecipients - let b:GPGOptions = [] - - " File doesn't exist yet, so nothing to decrypt - if empty(glob(filename)) - return - endif - - " Only let this if the file actually exists, otherwise GPG functionality - " will be disabled when editing a buffer that doesn't yet have a backing - " file - let b:GPGEncrypted = 0 - - " find the recipients of the file - let cmd = { 'level': 3 } - let cmd.args = '--verbose --decrypt --list-only --dry-run --batch --no-use-agent --logger-fd 1 ' . shellescape(filename) - let output = s:GPGSystem(cmd) - - " Suppress the "N more lines" message when editing a file, not when reading - " the contents of a file into a buffer - let silent = a:bufread ? 'silent ' : '' - - let asymmPattern = 'gpg: public key is ' . s:keyPattern - " check if the file is symmetric/asymmetric encrypted - if (match(output, "gpg: encrypted with [[:digit:]]\\+ passphrase") >= 0) - " file is symmetric encrypted - let b:GPGEncrypted = 1 - call s:GPGDebug(1, "this file is symmetric encrypted") - - let b:GPGOptions += ["symmetric"] - - " find the used cipher algorithm - let cipher = substitute(output, ".*gpg: \\([^ ]\\+\\) encrypted data.*", "\\1", "") - if (match(s:GPGCipher, "\\<" . cipher . "\\>") >= 0) - let b:GPGOptions += ["cipher-algo " . cipher] - call s:GPGDebug(1, "cipher-algo is " . cipher) - else - echohl GPGWarning - echom "The cipher " . cipher . " is not known by the local gpg command. Using default!" - echo - echohl None - endif - elseif (match(output, asymmPattern) >= 0) - " file is asymmetric encrypted - let b:GPGEncrypted = 1 - call s:GPGDebug(1, "this file is asymmetric encrypted") - - let b:GPGOptions += ["encrypt"] - - " find the used public keys - let start = match(output, asymmPattern) - while (start >= 0) - let start = start + strlen("gpg: public key is ") - let recipient = matchstr(output, s:keyPattern, start) - call s:GPGDebug(1, "recipient is " . recipient) - let name = s:GPGNameToID(recipient) - if (strlen(name) > 0) - let b:GPGRecipients += [name] - call s:GPGDebug(1, "name of recipient is " . name) - else - let b:GPGRecipients += [recipient] - echohl GPGWarning - echom "The recipient \"" . recipient . "\" is not in your public keyring!" - echohl None - end - let start = match(output, asymmPattern, start) - endwhile - else - " file is not encrypted - let b:GPGEncrypted = 0 - call s:GPGDebug(1, "this file is not encrypted") - echohl GPGWarning - echom "File is not encrypted, all GPG functions disabled!" - echohl None - exe printf('%sr %s', silent, fnameescape(filename)) - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGDecrypt()") - return - endif - - " check if the message is armored - if (match(output, "gpg: armor header") >= 0) - call s:GPGDebug(1, "this file is armored") - let b:GPGOptions += ["armor"] - endif - - " finally decrypt the buffer content - " since even with the --quiet option passphrase typos will be reported, - " we must redirect stderr (using shell temporarily) - call s:GPGDebug(1, "decrypting file") - let cmd = { 'level': 1, 'ex': silent . 'r !' } - let cmd.args = '--quiet --decrypt ' . shellescape(filename, 1) - call s:GPGExecute(cmd) - - if (v:shell_error) " message could not be decrypted - echohl GPGError - let blackhole = input("Message could not be decrypted! (Press ENTER)") - echohl None - " Only wipeout the buffer if we were creating one to start with. - " FileReadCmd just reads the content into the existing buffer - if a:bufread - silent bwipeout! - endif - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGDecrypt()") - return - endif - - " refresh screen - redraw! - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGDecrypt()") -endfunction - -" Function: s:GPGBufReadPost() {{{2 -" -" Handle functionality specific to opening a file for reading rather than -" reading the contents of a file into a buffer -" -function s:GPGBufReadPost() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGBufReadPost()") - " In order to make :undo a no-op immediately after the buffer is read, - " we need to do this dance with 'undolevels'. Actually discarding the undo - " history requires performing a change after setting 'undolevels' to -1 and, - " luckily, we have one we need to do (delete the extra line from the :r - " command) - let levels = &undolevels - set undolevels=-1 - silent 1delete - let &undolevels = levels - " call the autocommand for the file minus .gpg$ - silent execute ':doautocmd BufReadPost ' . fnameescape(expand('<afile>:r')) - call s:GPGDebug(2, 'called autocommand for ' . fnameescape(expand('<afile>:r'))) - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGBufReadPost()") -endfunction - -" Function: s:GPGBufWritePre() {{{2 -" -" Handle functionality specific to saving an entire buffer to a file rather -" than saving a partial buffer -" -function s:GPGBufWritePre() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGBufWritePre()") - " call the autocommand for the file minus .gpg$ - silent execute ':doautocmd BufWritePre ' . fnameescape(expand('<afile>:r')) - call s:GPGDebug(2, 'called autocommand for ' . fnameescape(expand('<afile>:r'))) - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGBufWritePre()") -endfunction - -" Function: s:GPGEncrypt() {{{2 -" -" encrypts the buffer to all previous recipients -" -function s:GPGEncrypt() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGEncrypt()") - - " store encoding and switch to a safe one - if (&fileencoding != &encoding) - let s:GPGEncoding = &encoding - let &encoding = &fileencoding - call s:GPGDebug(2, "encoding was \"" . s:GPGEncoding . "\", switched to \"" . &encoding . "\"") - else - let s:GPGEncoding = "" - call s:GPGDebug(2, "encoding and fileencoding are the same (\"" . &encoding . "\"), not switching") - endif - - " guard for unencrypted files - if (exists("b:GPGEncrypted") && b:GPGEncrypted == 0) - echohl GPGError - let blackhole = input("Message could not be encrypted! (Press ENTER)") - echohl None - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGEncrypt()") - return - endif - - " initialize GPGOptions if not happened before - if (!exists("b:GPGOptions") || len(b:GPGOptions) == 0) - let b:GPGOptions = [] - if (exists("g:GPGPreferSymmetric") && g:GPGPreferSymmetric == 1) - let b:GPGOptions += ["symmetric"] - let b:GPGRecipients = [] - else - let b:GPGOptions += ["encrypt"] - endif - if (exists("g:GPGPreferArmor") && g:GPGPreferArmor == 1) - let b:GPGOptions += ["armor"] - endif - if (exists("g:GPGPreferSign") && g:GPGPreferSign == 1) - let b:GPGOptions += ["sign"] - endif - call s:GPGDebug(1, "no options set, so using default options: " . string(b:GPGOptions)) - endif - - " built list of options - let options = "" - for option in b:GPGOptions - let options = options . " --" . option . " " - endfor - - if (!exists('b:GPGRecipients')) - let b:GPGRecipients = [] - endif - - " check here again if all recipients are available in the keyring - let [ recipients, unknownrecipients ] = s:GPGCheckRecipients(b:GPGRecipients) - - " check if there are unknown recipients and warn - if (len(unknownrecipients) > 0) - echohl GPGWarning - echom "Please use GPGEditRecipients to correct!!" - echo - echohl None - - " Let user know whats happend and copy known_recipients back to buffer - let dummy = input("Press ENTER to quit") - endif - - " built list of recipients - if (len(recipients) > 0) - for gpgid in recipients - let options = options . " -r " . gpgid - endfor - endif - - " encrypt the buffer - let destfile = tempname() - let cmd = { 'level': 1, 'ex': "'[,']w !" } - let cmd.args = '--quiet --no-encrypt-to ' . options - let cmd.redirect = '>' . shellescape(destfile, 1) - call s:GPGExecute(cmd) - - " restore encoding - if (s:GPGEncoding != "") - let &encoding = s:GPGEncoding - call s:GPGDebug(2, "restored encoding \"" . &encoding . "\"") - endif - - if (v:shell_error) " message could not be encrypted - " Command failed, so clean up the tempfile - call delete(destfile) - echohl GPGError - let blackhole = input("Message could not be encrypted! (Press ENTER)") - echohl None - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGEncrypt()") - return - endif - - call rename(destfile, resolve(expand('<afile>'))) - setl nomodified - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGEncrypt()") -endfunction - -" Function: s:GPGViewRecipients() {{{2 -" -" echo the recipients -" -function s:GPGViewRecipients() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGViewRecipients()") - - " guard for unencrypted files - if (exists("b:GPGEncrypted") && b:GPGEncrypted == 0) - echohl GPGWarning - echom "File is not encrypted, all GPG functions disabled!" - echohl None - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGViewRecipients()") - return - endif - - let [ recipients, unknownrecipients ] = s:GPGCheckRecipients(b:GPGRecipients) - - echo 'This file has following recipients (Unknown recipients have a prepended "!"):' - " echo the recipients - for name in recipients - let name = s:GPGIDToName(name) - echo name - endfor - - " echo the unknown recipients - echohl GPGWarning - for name in unknownrecipients - let name = "!" . name - echo name - endfor - echohl None - - " check if there is any known recipient - if (len(recipients) == 0) - echohl GPGError - echom 'There are no known recipients!' - echohl None - endif - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGViewRecipients()") -endfunction - -" Function: s:GPGEditRecipients() {{{2 -" -" create a scratch buffer with all recipients to add/remove recipients -" -function s:GPGEditRecipients() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGEditRecipients()") - - " guard for unencrypted files - if (exists("b:GPGEncrypted") && b:GPGEncrypted == 0) - echohl GPGWarning - echom "File is not encrypted, all GPG functions disabled!" - echohl None - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGEditRecipients()") - return - endif - - " only do this if it isn't already a GPGRecipients_* buffer - if (match(bufname("%"), "^\\(GPGRecipients_\\|GPGOptions_\\)") != 0 && match(bufname("%"), "\.\\(gpg\\|asc\\|pgp\\)$") >= 0) - - " save buffer name - let buffername = bufname("%") - let editbuffername = "GPGRecipients_" . buffername - - " check if this buffer exists - if (!bufexists(editbuffername)) - " create scratch buffer - execute 'silent! split ' . fnameescape(editbuffername) - - " add a autocommand to regenerate the recipients after a write - autocmd BufHidden,BufUnload,BufWriteCmd <buffer> call s:GPGFinishRecipientsBuffer() - else - if (bufwinnr(editbuffername) >= 0) - " switch to scratch buffer window - execute 'silent! ' . bufwinnr(editbuffername) . "wincmd w" - else - " split scratch buffer window - execute 'silent! sbuffer ' . fnameescape(editbuffername) - - " add a autocommand to regenerate the recipients after a write - autocmd BufHidden,BufUnload,BufWriteCmd <buffer> call s:GPGFinishRecipientsBuffer() - endif - - " empty the buffer - silent %delete - endif - - " Mark the buffer as a scratch buffer - setlocal buftype=acwrite - setlocal bufhidden=hide - setlocal noswapfile - setlocal nowrap - setlocal nobuflisted - setlocal nonumber - - " so we know for which other buffer this edit buffer is - let b:GPGCorrespondingTo = buffername - - " put some comments to the scratch buffer - silent put ='GPG: ----------------------------------------------------------------------' - silent put ='GPG: Please edit the list of recipients, one recipient per line.' - silent put ='GPG: Unknown recipients have a prepended \"!\".' - silent put ='GPG: Lines beginning with \"GPG:\" are removed automatically.' - silent put ='GPG: Data after recipients between and including \"(\" and \")\" is ignored.' - silent put ='GPG: Closing this buffer commits changes.' - silent put ='GPG: ----------------------------------------------------------------------' - - " get the recipients - let [ recipients, unknownrecipients ] = s:GPGCheckRecipients(getbufvar(b:GPGCorrespondingTo, "GPGRecipients")) - - " if there are no known or unknown recipients, use the default ones - if (len(recipients) == 0 && len(unknownrecipients) == 0) - if (type(g:GPGDefaultRecipients) == type([])) - let [ recipients, unknownrecipients ] = s:GPGCheckRecipients(g:GPGDefaultRecipients) - else - echohl GPGWarning - echom "g:GPGDefaultRecipients is not a Vim list, please correct this in your vimrc!" - echohl None - endif - endif - - " put the recipients in the scratch buffer - for name in recipients - let name = s:GPGIDToName(name) - silent put =name - endfor - - " put the unknown recipients in the scratch buffer - let syntaxPattern = "\\(nonexxistinwordinthisbuffer" - for name in unknownrecipients - let name = "!" . name - let syntaxPattern = syntaxPattern . "\\|" . fnameescape(name) - silent put =name - endfor - let syntaxPattern = syntaxPattern . "\\)" - - " define highlight - if (has("syntax") && exists("g:syntax_on")) - execute 'syntax match GPGUnknownRecipient "' . syntaxPattern . '"' - highlight clear GPGUnknownRecipient - highlight link GPGUnknownRecipient GPGHighlightUnknownRecipient - - syntax match GPGComment "^GPG:.*$" - execute 'syntax match GPGComment "' . s:GPGMagicString . '.*$"' - highlight clear GPGComment - highlight link GPGComment Comment - endif - - " delete the empty first line - silent 1delete - - " jump to the first recipient - silent $ - - endif - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGEditRecipients()") -endfunction - -" Function: s:GPGFinishRecipientsBuffer() {{{2 -" -" create a new recipient list from RecipientsBuffer -" -function s:GPGFinishRecipientsBuffer() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGFinishRecipientsBuffer()") - - " guard for unencrypted files - if (exists("b:GPGEncrypted") && b:GPGEncrypted == 0) - echohl GPGWarning - echom "File is not encrypted, all GPG functions disabled!" - echohl None - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGFinishRecipientsBuffer()") - return - endif - - " go to buffer before doing work - if (bufnr("%") != expand("<abuf>")) - " switch to scratch buffer window - execute 'silent! ' . bufwinnr(expand("<afile>")) . "wincmd w" - endif - - " delete the autocommand - autocmd! * <buffer> - - " get the recipients from the scratch buffer - let recipients = [] - let lines = getline(1,"$") - for recipient in lines - let matches = matchlist(recipient, '^\(.\{-}\)\%(' . s:GPGMagicString . '(ID:\s\+\(' . s:keyPattern . '\)\s\+.*\)\=$') - - let recipient = matches[2] ? matches[2] : matches[1] - - " delete all spaces at beginning and end of the recipient - " also delete a '!' at the beginning of the recipient - let recipient = substitute(recipient, "^[[:space:]!]*\\(.\\{-}\\)[[:space:]]*$", "\\1", "") - - " delete comment lines - let recipient = substitute(recipient, "^GPG:.*$", "", "") - - " only do this if the line is not empty - if (strlen(recipient) > 0) - let gpgid = s:GPGNameToID(recipient) - if (strlen(gpgid) > 0) - if (match(recipients, gpgid) < 0) - let recipients += [gpgid] - endif - else - if (match(recipients, recipient) < 0) - let recipients += [recipient] - echohl GPGWarning - echom "The recipient \"" . recipient . "\" is not in your public keyring!" - echohl None - endif - endif - endif - endfor - - " write back the new recipient list to the corresponding buffer and mark it - " as modified. Buffer is now for sure a encrypted buffer. - call setbufvar(b:GPGCorrespondingTo, "GPGRecipients", recipients) - call setbufvar(b:GPGCorrespondingTo, "&mod", 1) - call setbufvar(b:GPGCorrespondingTo, "GPGEncrypted", 1) - - " check if there is any known recipient - if (len(recipients) == 0) - echohl GPGError - echom 'There are no known recipients!' - echohl None - endif - - " reset modified flag - setl nomodified - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGFinishRecipientsBuffer()") -endfunction - -" Function: s:GPGViewOptions() {{{2 -" -" echo the recipients -" -function s:GPGViewOptions() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGViewOptions()") - - " guard for unencrypted files - if (exists("b:GPGEncrypted") && b:GPGEncrypted == 0) - echohl GPGWarning - echom "File is not encrypted, all GPG functions disabled!" - echohl None - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGViewOptions()") - return - endif - - if (exists("b:GPGOptions")) - echo 'This file has following options:' - " echo the options - for option in b:GPGOptions - echo option - endfor - endif - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGViewOptions()") -endfunction - -" Function: s:GPGEditOptions() {{{2 -" -" create a scratch buffer with all recipients to add/remove recipients -" -function s:GPGEditOptions() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGEditOptions()") - - " guard for unencrypted files - if (exists("b:GPGEncrypted") && b:GPGEncrypted == 0) - echohl GPGWarning - echom "File is not encrypted, all GPG functions disabled!" - echohl None - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGEditOptions()") - return - endif - - " only do this if it isn't already a GPGOptions_* buffer - if (match(bufname("%"), "^\\(GPGRecipients_\\|GPGOptions_\\)") != 0 && match(bufname("%"), "\.\\(gpg\\|asc\\|pgp\\)$") >= 0) - - " save buffer name - let buffername = bufname("%") - let editbuffername = "GPGOptions_" . buffername - - " check if this buffer exists - if (!bufexists(editbuffername)) - " create scratch buffer - execute 'silent! split ' . fnameescape(editbuffername) - - " add a autocommand to regenerate the options after a write - autocmd BufHidden,BufUnload,BufWriteCmd <buffer> call s:GPGFinishOptionsBuffer() - else - if (bufwinnr(editbuffername) >= 0) - " switch to scratch buffer window - execute 'silent! ' . bufwinnr(editbuffername) . "wincmd w" - else - " split scratch buffer window - execute 'silent! sbuffer ' . fnameescape(editbuffername) - - " add a autocommand to regenerate the options after a write - autocmd BufHidden,BufUnload,BufWriteCmd <buffer> call s:GPGFinishOptionsBuffer() - endif - - " empty the buffer - silent %delete - endif - - " Mark the buffer as a scratch buffer - setlocal buftype=nofile - setlocal noswapfile - setlocal nowrap - setlocal nobuflisted - setlocal nonumber - - " so we know for which other buffer this edit buffer is - let b:GPGCorrespondingTo = buffername - - " put some comments to the scratch buffer - silent put ='GPG: ----------------------------------------------------------------------' - silent put ='GPG: THERE IS NO CHECK OF THE ENTERED OPTIONS!' - silent put ='GPG: YOU NEED TO KNOW WHAT YOU ARE DOING!' - silent put ='GPG: IF IN DOUBT, QUICKLY EXIT USING :x OR :bd.' - silent put ='GPG: Please edit the list of options, one option per line.' - silent put ='GPG: Please refer to the gpg documentation for valid options.' - silent put ='GPG: Lines beginning with \"GPG:\" are removed automatically.' - silent put ='GPG: Closing this buffer commits changes.' - silent put ='GPG: ----------------------------------------------------------------------' - - " put the options in the scratch buffer - let options = getbufvar(b:GPGCorrespondingTo, "GPGOptions") - - for option in options - silent put =option - endfor - - " delete the empty first line - silent 1delete - - " jump to the first option - silent $ - - " define highlight - if (has("syntax") && exists("g:syntax_on")) - syntax match GPGComment "^GPG:.*$" - highlight clear GPGComment - highlight link GPGComment Comment - endif - endif - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGEditOptions()") -endfunction - -" Function: s:GPGFinishOptionsBuffer() {{{2 -" -" create a new option list from OptionsBuffer -" -function s:GPGFinishOptionsBuffer() - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGFinishOptionsBuffer()") - - " guard for unencrypted files - if (exists("b:GPGEncrypted") && b:GPGEncrypted == 0) - echohl GPGWarning - echom "File is not encrypted, all GPG functions disabled!" - echohl None - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGFinishOptionsBuffer()") - return - endif - - " go to buffer before doing work - if (bufnr("%") != expand("<abuf>")) - " switch to scratch buffer window - execute 'silent! ' . bufwinnr(expand("<afile>")) . "wincmd w" - endif - - " clear options and unknownOptions - let options = [] - let unknownOptions = [] - - " delete the autocommand - autocmd! * <buffer> - - " get the options from the scratch buffer - let lines = getline(1, "$") - for option in lines - " delete all spaces at beginning and end of the option - " also delete a '!' at the beginning of the option - let option = substitute(option, "^[[:space:]!]*\\(.\\{-}\\)[[:space:]]*$", "\\1", "") - " delete comment lines - let option = substitute(option, "^GPG:.*$", "", "") - - " only do this if the line is not empty - if (strlen(option) > 0 && match(options, option) < 0) - let options += [option] - endif - endfor - - " write back the new option list to the corresponding buffer and mark it - " as modified - call setbufvar(b:GPGCorrespondingTo, "GPGOptions", options) - call setbufvar(b:GPGCorrespondingTo, "&mod", 1) - - " reset modified flag - setl nomodified - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGFinishOptionsBuffer()") -endfunction - -" Function: s:GPGCheckRecipients(tocheck) {{{2 -" -" check if recipients are known -" Returns: two lists recipients and unknownrecipients -" -function s:GPGCheckRecipients(tocheck) - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGCheckRecipients()") - - let recipients = [] - let unknownrecipients = [] - - if (type(a:tocheck) == type([])) - for recipient in a:tocheck - let gpgid = s:GPGNameToID(recipient) - if (strlen(gpgid) > 0) - if (match(recipients, gpgid) < 0) - let recipients += [gpgid] - endif - else - if (match(unknownrecipients, recipient) < 0) - let unknownrecipients += [recipient] - echohl GPGWarning - echom "The recipient \"" . recipient . "\" is not in your public keyring!" - echohl None - endif - end - endfor - endif - - call s:GPGDebug(2, "recipients are: " . string(recipients)) - call s:GPGDebug(2, "unknown recipients are: " . string(unknownrecipients)) - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGCheckRecipients()") - return [ recipients, unknownrecipients ] -endfunction - -" Function: s:GPGNameToID(name) {{{2 -" -" find GPG key ID corresponding to a name -" Returns: ID for the given name -" -function s:GPGNameToID(name) - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGNameToID()") - - " ask gpg for the id for a name - let cmd = { 'level': 2 } - let cmd.args = '--quiet --with-colons --fixed-list-mode --list-keys ' . shellescape(a:name) - let output = s:GPGSystem(cmd) - - " when called with "--with-colons" gpg encodes its output _ALWAYS_ as UTF-8, - " so convert it, if necessary - if (&encoding != "utf-8") - let output = iconv(output, "utf-8", &encoding) - endif - let lines = split(output, "\n") - - " parse the output of gpg - let pubseen = 0 - let counter = 0 - let gpgids = [] - let duplicates = {} - let choices = "The name \"" . a:name . "\" is ambiguous. Please select the correct key:\n" - for line in lines - - " check if this line has already been processed - if !has_key(duplicates, line) - let duplicates[line] = 1 - - let fields = split(line, ":") - - " search for the next uid - if pubseen - if (fields[0] == "uid") - let choices = choices . " " . fields[9] . "\n" - else - let pubseen = 0 - endif - " search for the next pub - else - if (fields[0] == "pub") - " Ignore keys which are not usable for encryption - if fields[11] !~? 'e' - continue - endif - - let identity = fields[4] - let gpgids += [identity] - if exists("*strftime") - let choices = choices . counter . ": ID: 0x" . identity . " created at " . strftime("%c", fields[5]) . "\n" - else - let choices = choices . counter . ": ID: 0x" . identity . "\n" - endif - let counter = counter+1 - let pubseen = 1 - endif - endif - endif - - endfor - - " counter > 1 means we have more than one results - let answer = 0 - if (counter > 1) - let choices = choices . "Enter number: " - let answer = input(choices, "0") - while (answer == "") - let answer = input("Enter number: ", "0") - endwhile - endif - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGNameToID()") - return get(gpgids, answer, "") -endfunction - -" Function: s:GPGIDToName(identity) {{{2 -" -" find name corresponding to a GPG key ID -" Returns: Name for the given ID -" -function s:GPGIDToName(identity) - call s:GPGDebug(3, ">>>>>>>> Entering s:GPGIDToName()") - - " TODO is the encryption subkey really unique? - - " ask gpg for the id for a name - let cmd = { 'level': 2 } - let cmd.args = '--quiet --with-colons --fixed-list-mode --list-keys ' . a:identity - let output = s:GPGSystem(cmd) - - " when called with "--with-colons" gpg encodes its output _ALWAYS_ as UTF-8, - " so convert it, if necessary - if (&encoding != "utf-8") - let output = iconv(output, "utf-8", &encoding) - endif - let lines = split(output, "\n") - - " parse the output of gpg - let pubseen = 0 - let uid = "" - for line in lines - let fields = split(line, ":") - - if !pubseen " search for the next pub - if (fields[0] == "pub") - " Ignore keys which are not usable for encryption - if fields[11] !~? 'e' - continue - endif - - let pubseen = 1 - endif - else " search for the next uid - if (fields[0] == "uid") - let pubseen = 0 - if exists("*strftime") - let uid = fields[9] . s:GPGMagicString . "(ID: 0x" . a:identity . " created at " . strftime("%c", fields[5]) . ")" - else - let uid = fields[9] . s:GPGMagicString . "(ID: 0x" . a:identity . ")" - endif - break - endif - endif - endfor - - call s:GPGDebug(3, "<<<<<<<< Leaving s:GPGIDToName()") - return uid -endfunction - -function s:GPGPreCmd() - let &shellredir = s:shellredir - let &shell = s:shell - let &shelltemp = s:shelltemp -endfunction - -function s:GPGPostCmd() - let &shellredir = s:shellredirsave - let &shell = s:shellsave - let &shelltemp = s:shelltempsave -endfunction - -" Function: s:GPGSystem(dict) {{{2 -" -" run g:GPGCommand using system(), logging the commandline and output -" Recognized keys are: -" level - Debug level at which the commandline and output will be logged -" args - Arguments to be given to g:GPGCommand -" -" Returns: command output -" -function s:GPGSystem(dict) - let commandline = printf('%s %s', s:GPGCommand, a:dict.args) - if (!empty(g:GPGHomedir)) - let commandline .= ' --homedir ' . shellescape(g:GPGHomedir) - endif - let commandline .= ' ' . s:stderrredirnull - call s:GPGDebug(a:dict.level, "command: ". commandline) - - call s:GPGPreCmd() - let output = system(commandline) - call s:GPGPostCmd() - - call s:GPGDebug(a:dict.level, "output: ". output) - return output -endfunction - -" Function: s:GPGExecute(dict) {{{2 -" -" run g:GPGCommand using :execute, logging the commandline -" Recognized keys are: -" level - Debug level at which the commandline will be logged -" args - Arguments to be given to g:GPGCommand -" ex - Ex command which will be :executed -" redirect - Shell redirect to use, if needed -" -function s:GPGExecute(dict) - let commandline = printf('%s%s %s', a:dict.ex, s:GPGCommand, a:dict.args) - if (!empty(g:GPGHomedir)) - let commandline .= ' --homedir ' . shellescape(g:GPGHomedir, 1) - endif - if (has_key(a:dict, 'redirect')) - let commandline .= ' ' . a:dict.redirect - endif - let commandline .= ' ' . s:stderrredirnull - call s:GPGDebug(a:dict.level, "command: " . commandline) - - call s:GPGPreCmd() - execute commandline - call s:GPGPostCmd() -endfunction - -" Function: s:GPGDebug(level, text) {{{2 -" -" output debug message, if this message has high enough importance -" only define function if GPGDebugLevel set at all -" -function s:GPGDebug(level, text) - if exists("g:GPGDebugLevel") && g:GPGDebugLevel >= a:level - if exists("g:GPGDebugLog") - execute "redir >> " . g:GPGDebugLog - silent echom "GnuPG: " . a:text - redir END - else - echom "GnuPG: " . a:text - endif - endif -endfunction - -" Section: Commands {{{1 - -command! GPGViewRecipients call s:GPGViewRecipients() -command! GPGEditRecipients call s:GPGEditRecipients() -command! GPGViewOptions call s:GPGViewOptions() -command! GPGEditOptions call s:GPGEditOptions() - -" Section: Menu {{{1 - -if (has("menu")) - amenu <silent> Plugin.GnuPG.View\ Recipients :GPGViewRecipients<CR> - amenu <silent> Plugin.GnuPG.Edit\ Recipients :GPGEditRecipients<CR> - amenu <silent> Plugin.GnuPG.View\ Options :GPGViewOptions<CR> - amenu <silent> Plugin.GnuPG.Edit\ Options :GPGEditOptions<CR> -endif - -" vim600: set foldmethod=marker foldlevel=0 : diff --git a/dotfiles/.local/share/nvim/site/plugin/latexlivepreview.vim b/dotfiles/.local/share/nvim/site/plugin/latexlivepreview.vim deleted file mode 100644 index f4a315a..0000000 --- a/dotfiles/.local/share/nvim/site/plugin/latexlivepreview.vim +++ /dev/null @@ -1,276 +0,0 @@ -" Copyright (C) 2012 Hong Xu - -" This file is part of vim-live-preview. - -" vim-live-preview is free software: you can redistribute it and/or modify it -" under the terms of the GNU General Public License as published by the Free -" Software Foundation, either version 3 of the License, or (at your option) -" any later version. - -" vim-live-preview is distributed in the hope that it will be useful, but -" WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -" or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -" more details. - -" You should have received a copy of the GNU General Public License along with -" vim-live-preview. If not, see <http://www.gnu.org/licenses/>. - - -if v:version < 700 - finish -endif - -" Check whether this script is already loaded -if exists("g:loaded_vim_live_preview") - finish -endif -let g:loaded_vim_live_preview = 1 - -" Check mkdir feature -if (!exists("*mkdir")) - echohl ErrorMsg - echo 'vim-llp: mkdir required' - echohl None - finish -endif - -" Setup python -if (has('python3')) - let s:py_exe = 'python3' -elseif (has('python')) - let s:py_exe = 'python' -else - echohl ErrorMsg - echo 'vim-llp: python required' - echohl None - finish -endif - -let s:saved_cpo = &cpo -set cpo&vim - -let s:previewer = '' - -" Run a shell command in background -function! s:RunInBackground(cmd) - -execute s:py_exe "<< EEOOFF" - -try: - subprocess.Popen( - vim.eval('a:cmd'), - shell = True, - universal_newlines = True, - stdout=open(os.devnull, 'w'), stderr=subprocess.STDOUT) - -except: - pass -EEOOFF -endfunction - -function! s:Compile() - - if !exists('b:livepreview_buf_data') || - \ has_key(b:livepreview_buf_data, 'preview_running') == 0 - return - endif - - " Change directory to handle properly sourced files with \input and bib - " TODO: get rid of lcd - execute 'lcd ' . b:livepreview_buf_data['root_dir'] - - " Write the current buffer in a temporary file - silent exec 'write! ' . b:livepreview_buf_data['tmp_src_file'] - - call s:RunInBackground(b:livepreview_buf_data['run_cmd']) - - lcd - -endfunction - -function! s:StartPreview(...) - let b:livepreview_buf_data = {} - - let b:livepreview_buf_data['py_exe'] = s:py_exe - - " Create a temp directory for current buffer - execute s:py_exe "<< EEOOFF" -vim.command("let b:livepreview_buf_data['tmp_dir'] = '" + - tempfile.mkdtemp(prefix="vim-latex-live-preview-") + "'") -EEOOFF - - let b:livepreview_buf_data['tmp_src_file'] = - \ b:livepreview_buf_data['tmp_dir'] . - \ expand('%:p:r') - - " Guess the root file which will be compiled, using first the argument - " passed, then the first line declaration of the source file and - " eventually fallback to the current file. - " TODO: emulate -parse-first-line properly - let l:root_line = substitute(getline(1), - \ '\v^\s*\%\s*!tex\s*root\s*\=\s*(.*)\s*$', - \ '\1', '') - if (a:0 > 0) - let l:root_file = fnamemodify(a:1, ':p') - elseif (l:root_line != getline(1) && strlen(l:root_line) > 0) " TODO: existence of `% !TEX` declaration condition must be cleaned... - let l:root_file = fnamemodify(l:root_line, ':p') - else - let l:root_file = b:livepreview_buf_data['tmp_src_file'] - endif - - " Hack for complex project trees: recreate the tree in tmp_dir - " Build tree for tmp_src_file (copy of the current buffer) - let l:tmp_src_dir = fnamemodify(b:livepreview_buf_data['tmp_src_file'], ':p:h') - if (!isdirectory(l:tmp_src_dir)) - silent call mkdir(l:tmp_src_dir, 'p') - endif - " Build tree for root_file (main tex file, which might be tmp_src_file, - " ie. the current file) - if (l:root_file == b:livepreview_buf_data['tmp_src_file']) " if root file is the current file - let l:tmp_root_dir = l:tmp_src_dir - else - let l:tmp_root_dir = b:livepreview_buf_data['tmp_dir'] . fnamemodify(l:root_file, ':p:h') - if (!isdirectory(l:tmp_root_dir)) - silent call mkdir(l:tmp_root_dir, 'p') - endif - endif - - " Escape pathnames - let l:root_file = fnameescape(l:root_file) - let l:tmp_root_dir = fnameescape(l:tmp_root_dir) - let b:livepreview_buf_data['tmp_dir'] = fnameescape(b:livepreview_buf_data['tmp_dir']) - let b:livepreview_buf_data['tmp_src_file'] = fnameescape(b:livepreview_buf_data['tmp_src_file']) - - " Change directory to handle properly sourced files with \input and bib - " TODO: get rid of lcd - if (l:root_file == b:livepreview_buf_data['tmp_src_file']) " if root file is the current file - let b:livepreview_buf_data['root_dir'] = fnameescape(expand('%:p:h')) - else - let b:livepreview_buf_data['root_dir'] = fnamemodify(l:root_file, ':p:h') - endif - execute 'lcd ' . b:livepreview_buf_data['root_dir'] - - " Write the current buffer in a temporary file - silent exec 'write! ' . b:livepreview_buf_data['tmp_src_file'] - - let l:tmp_out_file = l:tmp_root_dir . '/' . - \ fnamemodify(l:root_file, ':t:r') . '.pdf' - - let b:livepreview_buf_data['run_cmd'] = - \ 'env ' . - \ 'TEXMFOUTPUT=' . l:tmp_root_dir . ' ' . - \ 'TEXINPUTS=' . l:tmp_root_dir - \ . ':' . b:livepreview_buf_data['root_dir'] - \ . ': ' . - \ s:engine . ' ' . - \ '-shell-escape ' . - \ '-interaction=nonstopmode ' . - \ '-output-directory=' . l:tmp_root_dir . ' ' . - \ l:root_file - " lcd can be avoided thanks to root_dir in TEXINPUTS - - silent call system(b:livepreview_buf_data['run_cmd']) - if v:shell_error != 0 - echo 'Failed to compile' - lcd - - return - endif - - " Enable compilation of bibliography: - let l:bib_files = split(glob(b:livepreview_buf_data['root_dir'] . '/**/*.bib')) " TODO: fails if unused bibfiles - if len(l:bib_files) > 0 - for bib_file in l:bib_files - let bib_fn = fnamemodify(bib_file, ':t') - call writefile(readfile(bib_file), - \ l:tmp_root_dir . '/' . bib_fn) " TODO: may fail if same bibfile names in different dirs - endfor - - " Update compile command with bibliography - let b:livepreview_buf_data['run_cmd'] = - \ 'env ' . - \ 'TEXMFOUTPUT=' . l:tmp_root_dir . ' ' . - \ 'TEXINPUTS=' . l:tmp_root_dir - \ . ':' . b:livepreview_buf_data['root_dir'] - \ . ': ' . - \ 'bibtex ' . l:tmp_root_dir . '/*.aux' . - \ ' && ' . - \ b:livepreview_buf_data['run_cmd'] - - silent call system(b:livepreview_buf_data['run_cmd']) - endif - if v:shell_error != 0 - echo 'Failed to compile bibliography' - lcd - - return - endif - - call s:RunInBackground(s:previewer . ' ' . l:tmp_out_file) - - lcd - - - let b:livepreview_buf_data['preview_running'] = 1 -endfunction - -" Initialization code -function! s:Initialize() - let l:ret = 0 - execute s:py_exe "<< EEOOFF" -try: - import vim - import tempfile - import subprocess - import os -except: - vim.command('let l:ret = 1') -EEOOFF - - if l:ret != 0 - return 'Python initialization failed.' - endif - - " Get the tex engine - if exists('g:livepreview_engine') - let s:engine = g:livepreview_engine - else - for possible_engine in ['pdflatex', 'xelatex'] - if executable(possible_engine) - let s:engine = possible_engine - break - endif - endfor - endif - - " Get the previewer - if exists('g:livepreview_previewer') - let s:previewer = g:livepreview_previewer - else - for possible_previewer in ['evince', 'okular'] - if executable(possible_previewer) - let s:previewer = possible_previewer - break - endif - endfor - endif - - return 0 -endfunction - - -let s:init_msg = s:Initialize() - -if type(s:init_msg) == type('') - echohl ErrorMsg - echo 'vim-live-preview: ' . s:init_msg - echohl None -endif - -unlet! s:init_msg - -command! -nargs=* LLPStartPreview call s:StartPreview(<f-args>) - -autocmd CursorHold,CursorHoldI,BufWritePost * call s:Compile() - -let &cpo = s:saved_cpo -unlet! s:saved_cpo - -" vim703: cc=80 -" vim:fdm=marker et ts=4 tw=78 sw=4 diff --git a/dotfiles/.local/share/nvim/site/plugin/neomake.vim b/dotfiles/.local/share/nvim/site/plugin/neomake.vim deleted file mode 100644 index 781871a..0000000 --- a/dotfiles/.local/share/nvim/site/plugin/neomake.vim +++ /dev/null @@ -1,50 +0,0 @@ -if exists('g:loaded_neomake') || &compatible - finish -endif -let g:loaded_neomake = 1 - -command! -nargs=* -bang -bar -complete=customlist,neomake#cmd#complete_makers - \ Neomake call neomake#Make(<bang>1, [<f-args>]) - -" These commands are available for clarity -command! -nargs=* -bar -complete=customlist,neomake#cmd#complete_makers - \ NeomakeProject Neomake! <args> -command! -nargs=* -bar -complete=customlist,neomake#cmd#complete_makers - \ NeomakeFile Neomake <args> - -command! -nargs=+ -bang -complete=shellcmd - \ NeomakeSh call neomake#ShCommand(<bang>0, <q-args>) -command! NeomakeListJobs call neomake#ListJobs() -command! -bang -nargs=1 -complete=custom,neomake#cmd#complete_jobs - \ NeomakeCancelJob call neomake#CancelJob(<q-args>, <bang>0) -command! -bang NeomakeCancelJobs call neomake#CancelJobs(<bang>0) - -command! -bang -bar -nargs=? -complete=customlist,neomake#cmd#complete_makers - \ NeomakeInfo call neomake#debug#display_info(<bang>0, <f-args>) - -command! -bang -bar NeomakeClean call neomake#cmd#clean(<bang>1) - -" Enable/disable/toggle commands. -command! -bar NeomakeToggle call neomake#cmd#toggle(g:) -command! -bar NeomakeToggleBuffer call neomake#cmd#toggle(b:) -command! -bar NeomakeToggleTab call neomake#cmd#toggle(t:) -command! -bar NeomakeDisable call neomake#cmd#disable(g:) -command! -bar NeomakeDisableBuffer call neomake#cmd#disable(b:) -command! -bar NeomakeDisableTab call neomake#cmd#disable(t:) -command! -bar NeomakeEnable call neomake#cmd#enable(g:) -command! -bar NeomakeEnableBuffer call neomake#cmd#enable(b:) -command! -bar NeomakeEnableTab call neomake#cmd#enable(t:) - -command! NeomakeStatus call neomake#cmd#display_status() - -" NOTE: experimental, no default mappings. -" NOTE: uses -addr=lines (default), and therefore negative counts do not work -" (see https://github.com/vim/vim/issues/3654). -command! -bar -count=1 NeomakeNextLoclist call neomake#list#next(<count>, 1) -command! -bar -count=1 NeomakePrevLoclist call neomake#list#prev(<count>, 1) -command! -bar -count=1 NeomakeNextQuickfix call neomake#list#next(<count>, 0) -command! -bar -count=1 NeomakePrevQuickfix call neomake#list#prev(<count>, 0) - -call neomake#setup#setup_autocmds() - -" vim: ts=4 sw=4 et diff --git a/dotfiles/.local/share/nvim/site/plugin/node.vim b/dotfiles/.local/share/nvim/site/plugin/node.vim deleted file mode 100644 index a541292..0000000 --- a/dotfiles/.local/share/nvim/site/plugin/node.vim +++ /dev/null @@ -1,47 +0,0 @@ -if exists("g:loaded_node") || &cp || v:version < 700 | finish | endif -let g:loaded_node = 1 - -let s:filetypes = ["javascript", "json", "jsx"] -if exists("g:node_filetypes") | let s:filetypes = g:node_filetypes | endif - -function! s:detect(dir) - if exists("b:node_root") | return | endif - let dir = a:dir - - while 1 - let is_node = 0 - let is_node = is_node || filereadable(dir . "/package.json") - let is_node = is_node || isdirectory(dir . "/node_modules") - if is_node | return node#initialize(dir) | endif - - let parent = fnamemodify(dir, ":h") - if parent == dir | return | endif - let dir = parent - endwhile -endfunction - -function! s:permutate(ft) - " Don't know right now how to detect javascript.jsx and other permutations - " without precomputing them in advance. Please let me know if you do. - return [a:ft, a:ft . ".*", "*." . a:ft, "*." . a:ft . ".*"] -endfunction - -function! s:flatten(list) - let values = [] - for value in a:list - if type(value) == type([]) | call extend(values, value) - else | add(values, value) - endif - endfor - return values -endfunction - -augroup Node - au! - au VimEnter * if empty(expand("<amatch>")) | call s:detect(getcwd()) | endif - au BufRead,BufNewFile * call s:detect(expand("<amatch>:p")) - - let s:filetype_patterns = s:flatten(map(s:filetypes, "<SID>permutate(v:val)")) - let s:filetype_patterns_joined = join(s:filetype_patterns, ",") - execute "au FileType " s:filetype_patterns_joined " call node#javascript()" -augroup end diff --git a/dotfiles/.local/share/nvim/site/plugin/vmath.vim b/dotfiles/.local/share/nvim/site/plugin/vmath.vim deleted file mode 100644 index 0e10044..0000000 --- a/dotfiles/.local/share/nvim/site/plugin/vmath.vim +++ /dev/null @@ -1,152 +0,0 @@ -" Vim global plugin for math on visual regions -" Maintainer: Damian Conway -" License: This file is placed in the public domain. - -"###################################################################### -"## ## -"## To use: ## -"## ## -"## vmap <expr> ++ VMATH_YankAndAnalyse() ## -"## nmap ++ vip++ ## -"## ## -"## (or whatever keys you prefer to remap these actions to) ## -"## ## -"###################################################################### - - -" If already loaded, we're done... -if exists("loaded_vmath") - finish -endif -let loaded_vmath = 1 - -" Preserve external compatibility options, then enable full vim compatibility... -let s:save_cpo = &cpo -set cpo&vim - -" Grab visual selection and do simple math on it... -function! VMATH_YankAndAnalyse () - if &showmode - " Don't reselect the visual region if showmode is enabled - " because it will clobber the sum/avg/etc report with the - " "-- VISUAL --" message. - return "y:call VMATH_Analyse()\<CR>" - else - return "y:call VMATH_Analyse()\<CR>gv" - endif -endfunction - -" What to consider a number... -let s:NUM_PAT = '^[+-]\?\d\+\%([.]\d\+\)\?\([eE][+-]\?\d\+\)\?$' - -" How widely to space the report components... -let s:REPORT_GAP = 3 "spaces between components - -" Do simple math on current yank buffer... -function! VMATH_Analyse () - " Extract data from selection... - let selection = getreg('') - let raw_numbers = filter(split(selection), 'v:val =~ s:NUM_PAT') - let numbers = map(copy(raw_numbers), 'str2float(v:val)') - - " Results include a newline if original selection did... - let newline = selection =~ "\n" ? "\n" : "" - - " Calculate and en-register various interesting metrics... - let summation = len(numbers) ? join( numbers, ' + ') : '0' - call setreg('s', s:tidy( eval( summation ) )) " Sum --> register s - call setreg('a', s:average(raw_numbers) ) " Average --> register a - call setreg('x', s:tidy( s:max(numbers) )) " Max --> register x - call setreg('n', s:tidy( s:min(numbers) )) " Min --> register n - call setreg('r', @n . ' to ' . @x ) " Range --> register r - call setreg('c', len(numbers) ) " Count --> register c - - " Default paste buffer should depend on original contents (TODO) - call setreg('', @s ) - - " Report... - let gap = repeat(" ", s:REPORT_GAP) - highlight NormalUnderlined term=underline cterm=underline gui=underline - echohl NormalUnderlined - echo 's' - echohl NONE - echon 'um: ' . @s . gap - echohl NormalUnderlined - echon 'a' - echohl NONE - echon 'vg: ' . @a . gap - echon 'mi' - echohl NormalUnderlined - echon 'n' - echohl NONE - echon ': ' . @n . gap - echon 'ma' - echohl NormalUnderlined - echon 'x' - echohl NONE - echon ': ' . @x . gap - echohl NormalUnderlined - echon 'c' - echohl NONE - echon 'ount: ' . @c - -endfunction - -" Prettify numbers... -function! s:tidy (number) - let tidied = printf('%g', a:number) - return substitute(tidied, '[.]0\+$', '', '') -endfunction - -" Compute average with meaningful number of decimal places... -function! s:average (numbers) - " Compute average... - let summation = eval( len(a:numbers) ? join( a:numbers, ' + ') : '0' ) - let avg = 1.0 * summation / s:max([len(a:numbers), 1]) - - " Determine significant figures... - let min_decimals = 15 - for num in a:numbers - let decimals = strlen(matchstr(num, '[.]\d\+$')) - 1 - if decimals < min_decimals - let min_decimals = decimals - endif - endfor - - " Adjust answer... - return min_decimals > 0 ? printf('%0.'.min_decimals.'f', avg) - \ : string(avg) -endfunction - -" Reimplement these because the builtins don't handle floats (!!!) -function! s:max (numbers) - if !len(a:numbers) - return 0 - endif - let numbers = copy(a:numbers) - let maxnum = numbers[0] - for nextnum in numbers[1:] - if nextnum > maxnum - let maxnum = nextnum - endif - endfor - return maxnum -endfunction - -function! s:min (numbers) - if !len(a:numbers) - return 0 - endif - let numbers = copy(a:numbers) - let minnum = numbers[0] - for nextnum in numbers[1:] - if nextnum < minnum - let minnum = nextnum - endif - endfor - return minnum -endfunction - - -" Restore previous external compatibility options -let &cpo = s:save_cpo |